Digitus Fast Ethernet USB 2.0 프린트 서버 사용자 설명서

1. 제품 오버view

The Digitus Fast Ethernet USB 2.0 Print Server is designed to easily connect your USB printer to a network, allowing multiple users to share a single printer. This device supports common network and printing protocols, including Peer-to-Peer and server printing environments. It is compatible with various operating systems such as Windows and Linux, and offers convenient management options via web interface or a Windows configuration utility.

패키지 내용:

• Digitus Fast Ethernet USB 2.0 Print Server
• 전원 어댑터
• Installation CD (or link to drivers/software online)
• 빠른 설치 가이드

2. 설정 및 설치

Follow these steps to set up your Digitus Fast Ethernet USB 2.0 Print Server:

2.1 하드웨어 연결

1. 프린터 연결: Plug your USB printer's USB cable into the USB 2.0 port on the print server.
2. 네트워크에 연결: Connect one end of an Ethernet cable to the RJ45 port on the print server and the other end to an available port on your network router or switch.
3. 전원 연결: Plug the provided power adapter into the print server's power input (5V 1A) and then into a wall outlet. The Status LED should illuminate.

2.2 소프트웨어 설치 및 구성

The print server can be configured via a Windows utility or a web-based interface. It is recommended to use the Windows utility for initial setup.

1. Install Utility: Insert the provided installation CD into your computer's CD-ROM drive. If you do not have a CD drive, download the latest utility and drivers from the official Digitus web대지.
2. 실행 설정: Follow the on-screen instructions to install the print server configuration utility.
3. 장치 검색: Launch the utility. It should automatically detect the print server on your network. If not, ensure your computer is on the same network segment as the print server.
4. IP 주소 구성: By default, the print server might have a static IP address (e.g., 192.168.0.10). For most home or small office networks, it is recommended to configure it to obtain an IP address automatically via DHCP.
   • In the utility, navigate to the TCP/IP settings.
   • Select "Obtain TCP/IP Settings Automatically (Use DHCP/BOOTP)".
   • Apply changes and restart the print server if prompted.
5. Add Printer: Once the print server has a valid IP address on your network, add the printer to your computer's operating system as a network printer.
   • Go to "Devices and Printers" (Windows) or "Printers & Scanners" (macOS/Linux).
   • Select "Add a printer".
   • Choose to add a network, wireless, or Bluetooth printer.
   • If prompted for a port, select "Standard TCP/IP Port" and enter the IP address of the print server.
   • Select the appropriate printer driver for your connected USB printer.
6. 테스트 인쇄: Print a test page to confirm successful installation.

3. Operating the Print Server

Once configured, the print server operates largely autonomously. Users on the network can print to the connected USB printer as if it were directly connected to their computer.

3.1 Printing from Networked Devices

• Ensure the print server is powered on and connected to the network.
• Ensure the USB printer is powered on and connected to the print server.
• From any computer or device on the network that has the printer installed, simply select the network printer from your application's print dialog and send the print job.
• The print server will queue and manage print jobs from multiple users.

3.2 Web- 기반 관리

For advanced configuration or monitoring, you can access the print server's web 인터페이스:

1. 열기 web 동일한 네트워크에 연결된 컴퓨터의 브라우저.
2. Enter the IP address of the print server into the browser's address bar (e.g., http://192.168.1.100).
3. Log in if prompted (default credentials are often "admin" for both username and password, refer to the quick start guide for specifics).
4. 에서 web 인터페이스, 당신은 할 수 있습니다 view status, change network settings, update firmware, and manage other print server functions.

4. 유지관리

The Digitus Fast Ethernet USB 2.0 Print Server requires minimal maintenance to ensure optimal performance.

• 깨끗하게 유지하십시오: Periodically wipe the exterior of the device with a soft, dry cloth. Do not use liquid cleaners or aerosols.
• 통풍: Ensure the print server is placed in a well-ventilated area to prevent overheating. Do not block any ventilation openings.
• 펌웨어 업데이트: Check the official Digitus website periodically for firmware updates. Updating firmware can improve performance, add features, or resolve known issues. Follow the instructions provided with the firmware update carefully.
• 전원 주기: If the device becomes unresponsive or experiences connectivity issues, try power cycling it (unplug the power adapter, wait 10 seconds, then plug it back in).

5. 문제 해결

This section addresses common issues you might encounter with the print server.

6. 기술 사양

7. 보증 및 지원

7.1 제조업체 보증

The Digitus Fast Ethernet USB 2.0 Print Server comes with a 2년 제조사 보증. 본 보증은 정상적인 사용 환경에서 발생하는 재료 및 제조상의 결함에 적용됩니다. 보증 청구를 위해 구매 증빙 서류를 보관해 주십시오.

The product originates from the European Economic Area (EEA) and is genuinely sourced from distributors authorized by the manufacturer.

7.2 기술 지원

For technical assistance, driver downloads, or firmware updates, please visit the official Digitus web사이트에서 FAQ와 추가 자료를 찾아보실 수도 있습니다.

Official Digitus Solutions: https://www.assmann.com/loesungen/loesungsuebersicht/

When contacting support, please have your product model number (DN-13003-2) and purchase information ready.