EJEAS V6 Pro 오토바이 헬멧 블루투스 헤드셋 사용 설명서

1. 소개 및 이상view

The EJEAS V6 Pro is a Bluetooth communication system designed for motorcycle helmets, enabling clear and reliable communication between riders. This headset supports a full-duplex 2-way intercom function, allowing any 2 of up to 6 paired riders to converse simultaneously over a maximum range of 1200 meters in open, unobstructed conditions. The system is engineered for versatility, offering seamless integration with mobile phones via Bluetooth for calls, GPS navigation, and music playback.

주요 특징은 다음과 같습니다.

• 양방향 인터콤: Supports communication between any two riders from a group of up to six paired devices.
• 확장된 범위: Up to 1200 meters (0.75 miles) intercom range in ideal conditions.
• 긴 배터리 수명: An 850mAh rechargeable battery provides up to 12 hours of intercom talk time and 360 hours of standby time on a 3.5-hour charge.
• 모바일 연결성: Connects to mobile phones for automatic call answering (after 5 seconds), call rejection (hold phone key for 3 seconds), GPS audio, and music streaming.
• 고급 소음 제거: Built-in CSR chip with DSP noise cancellation technology reduces wind, engine, and ambient noise for clear audio.
• 내구성 있는 디자인: Sun-proof and IP67 water-resistant construction ensures reliable performance in various weather conditions.

Figure 1: EJEAS V6 Pro function display highlighting key features.

2. 상자 안에 무엇이 들어있나요?

EJEAS V6 Pro 패키지에는 다음과 같은 구성 요소가 포함되어 있습니다.

• EJEAS V6 Pro Bluetooth Device
• USB 충전 케이블
• 장착 클립 (헬멧 부착용)
• Headphone Velcro (for speaker placement)
• 사용자 설명서
• Earphone Set (speakers and microphone)
• Small Screws and Allen Wrench (for clip installation)
• 포장 상자

Figure 2: Package contents of the EJEAS V6 Pro.

3. 설정 및 설치

Follow these steps to install your EJEAS V6 Pro headset onto your helmet:

1. Attach Mounting Clip: Secure the mounting clip to the side of your helmet. You can use the screw-on clamp for a more permanent fixture or the adhesive mount for easier removal. Ensure the clip is firmly attached.
2. 본체 삽입: Slide the EJEAS V6 Pro main unit into the mounting clip until it clicks securely into place.
3. 스피커 설치: Place the Velcro pads inside your helmet's ear pockets. Attach the speakers to these Velcro pads, ensuring they are positioned directly over your ears for optimal audio quality. Route the speaker wires neatly under the helmet padding.
4. 위치 마이크: Attach the microphone to the inside of the helmet, near your mouth. For full-face helmets, use the boom microphone. For open-face helmets, the button microphone can be used. Route the microphone cable along the helmet's interior.
5. 케이블 연결: Plug the speaker/microphone cable into the micro USB port on the main unit. Ensure the connection is secure.

설치 방법에 대한 시각적 안내는 아래 영상을 참조하십시오.

4. 사용 설명서

4.1 기본 컨트롤

The EJEAS V6 Pro features a simple interface for easy operation while riding:

• 전원 켜기/끄기: Long press the power button (usually the central button) for 3 seconds.
• 볼륨 조절: Rotate the jog dial (wheel) clockwise to increase volume and counter-clockwise to decrease volume.
• 음악 재생/일시 중지: 전원 버튼을 짧게 누릅니다.
• 다음 / 이전 트랙 : Rotate the jog dial clockwise (next) or counter-clockwise (previous) quickly.

4.2 Pairing for Intercom Communication

The V6 Pro allows up to 6 riders to pair, with any 2 able to talk simultaneously. One unit acts as the 'host' and can switch between 5 'submachines'.

1. 두 기기 모두 전원이 꺼져 있는지 확인하십시오.
2. On both devices, long press the 'Motorcycle' icon button until the blue and red lights flash rapidly, indicating pairing mode.
3. Briefly press the 'Motorcycle' icon button on one device (this will be the host unit). It will search for the other device.
4. Once paired, the blue lights on both devices will flash slowly, and you will hear a confirmation tone.

For detailed pairing instructions, watch the videos below:

4.3 Mobile Phone Pairing and Functions

To pair your EJEAS V6 Pro with your mobile phone:

1. Ensure the V6 Pro is in pairing mode (blue and red lights flashing rapidly).
2. 휴대폰에서 Bluetooth를 활성화하고 사용 가능한 기기를 검색하세요.
3. Select 'EJEAS V6 Pro' from the list to connect.

연결되면 다음을 수행할 수 있습니다.

• 전화 받기: The headset will automatically answer incoming calls after 5 seconds.
• 통화 거부: Press and hold the phone key for 3 seconds.
• Listen to GPS: Audio navigation from your phone will be streamed to your headset.
• 음악 재생: Stream music from your phone to your headset.

Figure 3: Automatic call answering feature for safe riding.

Figure 4: Supports connecting two mobile phones simultaneously.

5. 유지관리

5.1 충전 중

The EJEAS V6 Pro is equipped with an 850mAh large rechargeable battery. To charge, connect the provided USB cable to the Type-C charging port on the unit and a power source. A full charge takes approximately 3.5 hours.

5.2 방수성

The device features an IP67 water-resistant design, making it sun-proof and dust-proof. You can use it confidently even on light rainy days without worrying about water damage.

Figure 5: The EJEAS V6 Pro is IP67 rated for water resistance.

6. 문제 해결

If you encounter any issues with your EJEAS V6 Pro Bluetooth headset, particularly with pairing, please refer to the provided videos in the Setup and Operating Instructions sections. These videos offer detailed visual guides that can help resolve common problems.

추가적인 도움이 필요하시면 보증 및 지원 섹션에 안내된 대로 고객 지원팀에 문의하십시오.

7. 사양

8. 보증 및 지원

EJEAS offers a 6-month warranty for the V6 Pro Motorcycle Helmet Bluetooth Headset. For any product problems or technical support, please click on the seller's name "G-WEI US" on the product page and then select "ASK A QUESTION". You will receive a reply within 12 hours.

You can also visit the official EJEAS website for firmware upgrades and additional support resources.

Figure 6: EJEAS Support website for firmware upgrades and assistance.