Mattel Hot Wheels Track Builder System Launcher FTV22 Instruction Manual

소개

This manual provides essential instructions for the assembly, operation, and maintenance of your Mattel Hot Wheels Track Builder System Launcher, model FTV22. This accessory is designed to enhance your Hot Wheels track experience by providing a mechanism to launch vehicles. Please read all instructions carefully before use.

설정

Assembly is required for this product. Follow the steps below to set up your launcher accessory:

1. 트랙에 연결: Ensure the launcher is securely connected to your existing Hot Wheels track system. The packaging indicates 'CONECTA' (CONNECT) for proper track attachment.
2. 발사기를 준비하세요: As shown in image 'a' on the product packaging, pull back the launching mechanism until it locks into place. This action primes the launcher for use.
3. 차량 위치: Position a Hot Wheels vehicle onto the track section immediately in front of the launcher.

이미지 설명: The back of the product packaging for the Hot Wheels Track Builder System Launcher. This image illustrates the setup and operation. Section 'a' shows a hand pulling back the launcher mechanism, indicating the priming action. Section 'b' shows a hand pressing down on the launcher, demonstrating the release action. Other sections show track connection points and safety information.

작동 지침

Once the launcher is set up and a vehicle is in place, follow these steps to operate:

1. Activate the Launcher: As depicted in image 'b' on the product packaging, firmly press down on the designated activation point of the launcher. This will release the mechanism and propel the Hot Wheels vehicle forward onto the track.
2. 반복하다: To launch another vehicle, repeat the setup steps by pulling back the mechanism and placing a new vehicle.

This launcher is compatible with most Hot Wheels Track Sets and Hot Wheels Vehicles. Ensure vehicles are properly aligned for optimal launch performance.

유지

To ensure the longevity and proper function of your Hot Wheels Track Builder System Launcher, follow these simple maintenance guidelines:

• 청소: Wipe the accessory with a dry or slightly damp 옷감. 강한 화학 물질이나 연마성 세제를 사용하지 마십시오.
• 저장: Store the launcher in a clean, dry place away from direct sunlight and extreme temperatures.
• 점검: Periodically inspect all parts for any signs of wear, damage, or loose connections. Discontinue use if any damage is found and replace if necessary.

문제 해결

If you encounter issues with your launcher, consider the following common solutions:

• Vehicle Not Launching: Ensure the launcher mechanism is fully pulled back and locked before attempting to launch. Verify the vehicle is correctly positioned on the track.
• Weak Launch: Check for any obstructions in the track or launcher path. Ensure the track connections are secure and stable.
• 연결 문제: If the launcher does not connect properly to other track pieces, ensure all connectors are clean and undamaged.

명세서

안전 정보

경고:

• Toy not recommended for children under 3 years of age. May contain small parts that could cause choking if ingested by a child.
• STRANGULATION HAZARD: Not recommended for children under 3 years due to the cord that could cause asphyxiation if it strangles them.
• Plastic bags can be dangerous. To avoid suffocation, keep plastic bags away from babies and children.
• This product conforms to the safety standards of ASTM F963.
• Certified by INMETRO (CE-BR/INNAC-00128-18A NM 300/2002).

보증 정보

Specific warranty details for the Mattel Hot Wheels Track Builder System Launcher FTV22 are not provided in this manual. Please refer to the manufacturer's official web보증 정보는 해당 사이트를 참조하거나 고객 지원팀에 문의하세요.

고객 지원

추가적인 도움이나 제품 정보는 다음을 참조하세요. view other Hot Wheels products, please visit the official Mattel Hot Wheels web사이트:

• 공식 핫휠 Web대지: hotwheels.com
• 핫 휠 트랙 빌더 Web대지: hotwheels.com/trackbuilder

제조사: 마텔