1. 서론
Thank you for choosing the Bosch Professional Jigsaw GST 700. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new jigsaw. Please read these instructions carefully before use and keep them for future reference.
The Bosch Professional Jigsaw GST 700 is a powerful tool designed for precise cutting in various materials. It features a rated input power of 500 W and a no-load stroke rate of 1,450 – 3,200 strokes per minute, ensuring high performance in cutting speed and quality. Its design allows for improved cutting results across different materials and offers faster, easier blade changes.
Image 1.1: The Bosch Professional Jigsaw GST 700. This image shows the blue and black jigsaw with its ergonomic handle and blade guard, ready for use.
2. 안전 지침
일반 전동 공구 안전 경고:
- Always wear eye protection, hearing protection, and a dust mask when operating the jigsaw.
- 작업 공간을 깨끗하고 밝게 유지하십시오. 어수선하거나 어두운 곳은 사고를 유발합니다.
- 가연성 액체, 가스, 먼지 등 폭발 위험이 있는 환경에서는 전동 공구를 작동하지 마세요.
- 전동 공구를 작동하는 동안 어린이와 주변 사람을 멀리하십시오. 주의가 산만해지면 제어력을 잃을 수 있습니다.
- 실수로 시작하지 않도록 주의하세요. 플러그를 꽂기 전에 스위치가 꺼짐 위치에 있는지 확인하세요.
- 너무 뻗지 마세요. 항상 적절한 발판과 균형을 유지하세요.
- 전동공구를 조정하거나, 액세서리를 교체하거나, 보관하기 전에 항상 전원 플러그를 콘센트에서 뽑으십시오.
Jigsaw Specific Safety Warnings:
- 절단 부속품이 숨겨진 배선이나 자체 코드에 닿을 수 있는 작업을 수행할 때는 절연 처리된 손잡이 부분을 잡고 공구를 작동시키십시오.
- 작업물을 고정합니다. cl을 사용하세요.amp작업물을 고정하기 위해 s 또는 바이스를 사용합니다. 이 방법은 손을 사용하는 것보다 안전하며, 두 손을 자유롭게 사용하여 공구를 조작할 수 있습니다.
- Never place your hands in the cutting path.
- Ensure the blade is sharp and suitable for the material being cut.
- Do not force the saw. Let the blade do the work.
3. 설정
Before operating your Bosch Professional Jigsaw GST 700, ensure it is properly set up for the task.
3.1 블레이드 설치
- 전원 분리: Always unplug the jigsaw from the power source before installing or changing blades.
- 오픈 블레이드 Clamp: 블레이드 cl을 찾으세요amp mechanism. For the GST 700, blade changes are typically keyed. Use the provided key to loosen the blade clamp 나사.
- 블레이드 삽입: Insert the shank of the jigsaw blade into the blade holder with the teeth facing forward. Ensure the blade is fully seated and the back edge of the blade fits into the guide roller.
- 안전한 블레이드: 날 cl을 조입니다amp screw firmly with the key. Gently pull on the blade to ensure it is securely locked in place.
3.2 베이스 플레이트 조정
The base plate can be adjusted for bevel cuts. To adjust the cutting angle:
- 나사를 풀어주세요: Loosen the screws that secure the base plate to the jigsaw body.
- 각도 조정: Tilt the base plate to the desired angle (up to 45 degrees). Use the angle scale on the base plate for accuracy.
- 나사를 조이세요: Securely tighten the base plate screws to lock the angle in position.
3.3 집진 연결
For cleaner operation and improved visibility, connect a dust extraction system to the jigsaw's dust port. Ensure the hose is securely attached and does not interfere with the cutting operation.
Image 3.1: The Bosch Professional Jigsaw GST 700 in its retail packaging. The packaging highlights key features like 500W power and variable speed.
4. 사용 설명서
Follow these steps for safe and effective operation of your jigsaw.
4.1 전원 켜기/끄기
- 켜려면: Press the ON/OFF switch. For continuous operation, press the lock-on button.
- 끄기: Release the ON/OFF switch. If the lock-on button is engaged, press the ON/OFF switch again to release it.
4.2 속도 제어
The GST 700 features variable speed control, allowing you to match the cutting speed to the material. Adjust the speed dial to the desired setting. Lower speeds are suitable for harder materials like metal, while higher speeds are for softer materials like wood.
4.3 절단 기술
스트레이트 컷:
- Mark your cutting line clearly.
- Place the jigsaw's base plate flat on the workpiece, ensuring the blade is aligned with the cutting line.
- Start the saw before it contacts the workpiece.
- Guide the saw steadily along the line, applying gentle forward pressure. Do not force the tool.
곡선 컷:
- Use a narrow blade designed for curved cuts.
- Proceed slowly, allowing the blade to follow the curve. Avoid sharp turns that can bind or break the blade.
Plunge Cuts (without pre-drilling):
- Tilt the jigsaw forward so the front edge of the base plate rests on the workpiece, with the blade clear of the surface.
- Start the saw at full speed.
- Slowly pivot the saw downwards, allowing the blade to plunge into the material.
- Once the blade has fully penetrated, level the base plate and continue cutting as usual.
Image 4.1: A craftsman uses the Bosch Professional Jigsaw GST 700 to precisely cut a curved shape from a large wooden panel on the floor of a construction site.
Image 4.2: A worker operates the Bosch Professional Jigsaw GST 700 to cut a wooden board on a sturdy workbench, demonstrating its use in a workshop setting.
Image 4.3: Two individuals are actively using Bosch Professional Jigsaws GST 700 to cut large wooden panels in a spacious workshop, highlighting collaborative work and the tool's application in woodworking.
5. 유지관리
정기적인 유지관리는 퍼즐의 수명과 최적의 성능을 보장합니다.
5.1 청소
- 전원 분리: 청소하기 전에 항상 도구의 플러그를 뽑으십시오.
- 통풍구 청소: Keep the ventilation openings clean to prevent motor overheating. Use compressed air to blow out dust and debris.
- 닦아내다: 도구 하우징을 부드러운 천으로 닦으세요.amp 옷감. 강한 화학 물질이나 연마성 세제를 사용하지 마십시오.
- Blade Area: Remove any sawdust or debris from the blade area and guide roller.
5.2 블레이드 교체
Replace blades when they become dull or damaged. Refer to Section 3.1 for detailed blade installation instructions.
5.3 카본 브러시 검사
The carbon brushes are wear parts. If the motor sparks excessively or the tool loses power, the carbon brushes may need inspection or replacement. This should ideally be performed by a qualified service technician.
5.4 보관
Store the jigsaw in a dry, secure location out of reach of children. If storing for extended periods, ensure the tool is clean and the power cord is neatly coiled.
6. 문제 해결
이 섹션에서는 직소 사용 시 발생할 수 있는 일반적인 문제에 대해 설명합니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 퍼즐이 시작되지 않습니다. | 전원 공급 불량; 스위치 불량; 카본 브러시 마모. | Check power connection and outlet; replace switch; have carbon brushes inspected/replaced by service. |
| 절단 품질 불량 (거친 모서리, 갈라짐). | Dull or incorrect blade; too fast feed rate; incorrect speed setting. | Replace blade or use appropriate blade for material; reduce feed rate; adjust speed setting. |
| 과도한 진동. | Loose blade; bent blade; damaged guide roller. | 블레이드가 단단히 고정되었는지 확인하세요amped; replace bent blade; inspect/replace guide roller. |
| 칼날이 걸리거나 뻑뻑해집니다. | Forcing the cut; workpiece not properly supported; incorrect blade for material thickness. | Reduce feed pressure; ensure workpiece is clamped; use a blade suitable for material thickness. |
7. 사양
Detailed technical specifications for the Bosch Professional Jigsaw GST 700.
| 특징 | 사양 |
|---|---|
| 브랜드 이름 | 보쉬 |
| 모델 번호 | 0.601.2A7.020 |
| ASIN | B07CZGLFN5 |
| 국제 무역 품목 번호(GTIN) | 03165140898980 |
| 제조업체 | 보쉬 |
| 첫 번째 가능한 날짜 | 7년 2018월 XNUMX일 |
| 제품 크기(L x W x H) | 29.5 x 23 x 9.3cm |
| 품목 무게 | 2.66kg |
| 정격 입력 전력 | 500와트 |
| 무부하 스트로크 속도 | 1,450 – 3,200 strokes/min (3200 RPM) |
| 스트로크 길이 | 20mm (XNUMXmm) |
| 목재 절단 깊이 | 70mm (XNUMXmm) |
| 알루미늄 절단 깊이 | 10mm (XNUMXmm) |
| Cutting Depth in Non-alloyed Steel | 6mm (XNUMXmm) |
| 절단 각도 | 45도 |
| 전원 | 코드식 전기 |
| 블레이드 소재 | 고속강철 |
| 블레이드 모양 | 직사각형 |
| 블레이드 길이 | 141.73인치 |
| 이빨의 수 | 28 |
| 특별 기능 | Keyed Blade Change |
| 포함된 구성 요소 | 예 |
| 색상 | 멀티 |
| 표면 추천 | 목재 |
| 손잡이 재질 | 플라스틱 |
8. 보증 및 지원
보증 정보:
This product carries a manufacturer's warranty for 1 year from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
고객 지원:
For maintenance, technical assistance, or further details regarding your warranty, you can contact the manufacturer or their authorized service agent. Alternatively, for purchase-related inquiries, you may contact Amazon customer service.
For more information about Bosch Professional products, please visit the official Bosch Professional web해당 웹사이트 또는 가까운 공인 대리점을 방문하십시오.