U.S. Solid Motorized Ball Valve Instruction Manual

1. 서론

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your U.S. Solid Motorized Ball Valve, Model USS-MSV00052. This 1/4 inch, 85-265V AC, 2-wire automatic return valve is designed for various applications requiring reliable fluid control. Please read this manual thoroughly before use and retain it for future reference.

2. 안전 정보

경고: Improper installation or operation can result in property damage, injury, or death. Always follow local codes and regulations.

• 설치, 배선 또는 유지관리 작업을 수행하기 전에 전원이 차단되었는지 확인하세요.
• 설치는 전기 및 배관 시스템에 대한 지식이 있는 자격을 갖춘 사람이 수행해야 합니다.
• Verify the valve's voltage rating (85-265V AC) matches your power supply.
• Do not exceed the maximum operating pressure of 1000 Pascal.
• Protect the valve from extreme temperatures and corrosive environments unless specifically rated for such conditions.

3. 제품 오버view

The U.S. Solid Motorized Ball Valve is a robust solution for automated fluid control. Key features include:

• NPT Threading: Features 1/4 inch Stainless Steel NPT threading, ensuring compatibility with standard pipe systems. This is a full port valve.
• 와이드볼tag전자 범위: Operates effectively on 85-265V AC power.
• 빠른 작업: Opens or closes the valve within 3-5 seconds.
• 에너지 효율성: Once fully open or closed, the valve consumes minimal to no power, reducing the likelihood of overheating.
• 2-Wire Automatic Return: Simple wiring for automatic return to a closed position upon power loss.
• 내구성: Designed for a long lifespan of 80,000-100,000 cycles.
• IP65 정격: 먼지 유입 및 모든 방향에서 분사되는 저압수로부터 보호해 줍니다.

이미지 3.1: 앞쪽 view of the U.S. Solid 1/4 inch motorized ball valve, showing the blue actuator and stainless steel body.

이미지 3.2: 옆 view of the motorized ball valve, illustrating the blue actuator, stainless steel valve body, and the two-wire connection.

4. 사양

이미지 4.1: Technical drawing showing the dimensions of the motorized ball valve in millimeters, including length, height, and thread size.

이미지 4.2: Diagram illustrating the IP65 ingress protection rating for solids and liquids, and visual representations of normally closed, full port, normally open, and standard port valve configurations.

5. 설치

Before installation, ensure the power supply is off and the system is depressurized. This valve is designed for NPT threaded connections.

1. 스레드를 준비하세요: Apply appropriate thread sealant (e.g., PTFE tape) to the male pipe threads. Wrap the tape clockwise around the threads, ensuring full coverage.
2. 밸브 연결: Carefully screw the valve onto the pipe ends. Tighten securely to prevent leaks, but do not overtighten.
3. 위치: Ensure the valve actuator is positioned to allow for easy access for wiring and future maintenance.
4. 검사: After installation, visually inspect all connections for proper alignment and tightness.

이미지 5.1: 클로즈업 view of the 1/4 inch NPT threading on the valve, highlighting the full port design.

이미지 5.2: Visual guide demonstrating the application of Teflon tape to male pipe threads for a watertight seal, and the resulting threaded connection to the valve.

6. 배선도

This valve features a 2-wire automatic return configuration. This means the valve will open when power is applied and automatically return to its closed position when power is removed.

• 연결: Connect the two wires from the valve to your 85-265V AC power source, typically through a switch.
• 작업: When the circuit is closed (switch is ON), the valve will open and remain open. Once open, power consumption is nominal.
• 자동 반환: When the circuit is open (switch is OFF or power is lost), the valve will close. In this state, the valve is fully de-energized, consuming zero power.

이미지 6.1: Schematic diagram illustrating the 2-wire automatic return wiring for the motorized ball valve, showing how a switch controls the open and closed states.

이미지 6.2: Detailed wiring diagrams for 2-wire auto return valves, applicable for both DC and AC power sources, showing the open and closed states.

7. 운영

The U.S. Solid Motorized Ball Valve operates based on the presence or absence of electrical power to its two-wire connection.

• 밸브를 열려면: Apply 85-265V AC power to the valve's two wires. The internal motor will rotate the ball to the open position within 3-5 seconds. Once fully open, the motor de-energizes, and the valve remains open with minimal power consumption.
• 밸브를 닫으려면: Remove the 85-265V AC power from the valve's two wires. The valve will automatically return to its fully closed position within 3-5 seconds. Once fully closed, the valve is completely de-energized.

This automatic return feature makes it suitable for applications where a default closed state is desired, especially in case of power interruption.

8. 유지관리

The U.S. Solid Motorized Ball Valve is designed for long-term, reliable operation with minimal maintenance. However, periodic checks are recommended:

• 시각적 검사: Regularly inspect the valve and connections for any signs of leaks, corrosion, or physical damage.
• 전기 연결: Ensure all electrical connections are secure and free from moisture or damage.
• 액추에이터 기능: Periodically cycle the valve (open and close) to ensure the actuator operates smoothly and fully.
• 청소: Keep the exterior of the valve and actuator clean and free from debris.

For internal components, refer to qualified service personnel only.

9. 문제 해결

If you encounter issues with your motorized ball valve, consider the following troubleshooting steps:

• 밸브가 열리지 않거나 닫히지 않음:
  • Check if power is correctly supplied to the valve (for opening) or completely removed (for closing).
  • 볼륨을 확인하세요tage matches the valve's rating (85-265V AC).
  • 배선을 검사하여 연결이 느슨하거나 손상되지 않았는지 확인하세요.
• 연결부 누수:
  • Ensure pipe threads were properly prepared with thread sealant (e.g., PTFE tape).
  • Check if connections are tightened sufficiently. Do not overtighten, as this can damage threads.
• 작동 중 비정상적인 소음:
  • Ensure the valve is not obstructed internally or externally.
  • 소음이 지속되어 성능에 영향을 미치는 경우 고객 지원팀에 문의하십시오.

If these steps do not resolve the issue, please contact U.S. Solid customer support.

10. 보증 및 지원

U.S. Solid stands by the quality of its products. This motorized ball valve is backed by a 1-year warranty or money-back promise, ensuring customer satisfaction. For technical assistance, warranty claims, or any product-related inquiries, please contact U.S. Solid customer support through the retailer where the product was purchased or visit the official U.S. Solid web대지.