Bluesound WM200 Universal Wall Mount Instruction Manual

소개

Thank you for choosing the Bluesound WM200 Universal Wall Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your wall mount. Please read these instructions thoroughly before installation and retain them for future reference.

The WM200 wall mount is specifically designed for use with Bluesound PULSE, PULSE 2, PULSE 2i, PULSE MINI, and PULSE MINI 2i speakers, offering a secure and aesthetically pleasing mounting solution.

안전 정보

• 모든 지침을 읽으십시오. Before installation, carefully read and understand all instructions.
• Verify wall structure: Ensure the mounting surface can safely support the combined weight of the wall mount and your speaker. Consult a professional if unsure.
• 적절한 도구를 사용하십시오. Use only the recommended tools and hardware for installation.
• 안전한 설치: Improper installation can result in serious injury or damage to equipment. Ensure all fasteners are tightened securely.
• 어린이의 손이 닿지 않는 곳에 보관: 작은 부품은 질식 위험이 있습니다.

패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

• 1 x Bluesound WM200 Universal Wall Mount
• 장착 하드웨어(나사, 벽 앵커)
• 사용 설명서(본 문서)

Figure 1: Bluesound WM200 Wall Mount product packaging.

설정 및 설치

Follow these steps to securely install your Bluesound WM200 Universal Wall Mount:

1. 위치를 선택하십시오 : Select a suitable wall location, ensuring it is structurally sound and free from electrical wires or plumbing. Consider the optimal listening height and desired swivel range.
2. 드릴링 지점 표시: Hold the wall mount against the wall at the desired height and use a pencil to mark the drilling points for the mounting screws. Ensure the mount is level.
3. 드릴 구멍: Using an appropriate drill bit for your wall type (e.g., masonry for brick, wood bit for studs), drill pilot holes at the marked locations. If drilling into drywall without a stud, insert the provided wall anchors.
4. 벽걸이 마운트를 부착하세요: Align the wall mount with the drilled holes. Insert the mounting screws and tighten them securely. Do not overtighten. The mount is constructed from durable steel for reliable support.
5. 케이블 경로: The WM200 features rubber mouldings designed for flexible wire management. Route your speaker's power and audio cables through these mouldings to keep them tidy and protected.
6. 스피커 연결: Carefully slide your compatible Bluesound speaker onto the wall mount. Ensure it is seated firmly and securely.

Figure 2: Bluesound WM200 Wall Mount with compatible speaker (speaker sold separately).

그림 3: 측면 view of the WM200 mount securely holding a Bluesound speaker.

작업

The Bluesound WM200 Universal Wall Mount offers a 120° total swivel control. This allows you to adjust the direction of your speaker to optimize sound projection and listening experience. Gently pivot the speaker and mount assembly to achieve the desired angle.

유지

To ensure the longevity and appearance of your Bluesound WM200 Wall Mount, follow these simple maintenance guidelines:

• 청소: Wipe the mount with a soft, dry cloth to remove dust. For stubborn marks, a slightly damp 천을 사용하여 세척 후 바로 말리세요. 연마성 세척제나 용제는 사용하지 마세요.
• 정기 점검: Periodically check all mounting screws to ensure they remain tight and secure. Do not overtighten.

문제 해결

If you encounter any issues with your WM200 Wall Mount, consider the following:

• 마운트가 느슨해진 느낌: Ensure all mounting screws are securely fastened to the wall and that the speaker is correctly seated on the mount. Re-check the wall structure for stability.
• Speaker not fitting: Verify that your speaker model is compatible with the WM200 mount (PULSE, PULSE 2, PULSE 2i, PULSE MINI, PULSE MINI 2i).
• 회전이 어렵습니다. Ensure no cables are obstructing the swivel mechanism. The swivel should operate smoothly with gentle force.

명세서

그림 4: 예ample installation of the Bluesound WM200 Wall Mount in a living space.

보증 정보

Bluesound products are manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region. Please refer to the warranty card included with your product or visit the official Bluesound web자세한 보증 정보는 사이트를 참조하십시오.

지원하다

For technical assistance, troubleshooting, or further inquiries regarding your Bluesound WM200 Universal Wall Mount, please visit the official Bluesound support website or contact their customer service department. You can typically find contact information and FAQs on the Bluesound web대지:

www.bluesound.com/support