NoBrand LinQ CLS-URC-5706 6-in-1 Universal Remote Control Instruction Manual

소개

This instruction manual provides detailed guidance for the setup, operation, and maintenance of your NoBrand LinQ CLS-URC-5706 6-in-1 Universal Remote Control. This remote is designed to consolidate control of up to six different audio/video devices, including TVs, DVDs, DVB-T receivers, AUX devices, VCRs, and Satellite receivers, into a single, convenient unit. Please read this manual thoroughly before first use to ensure proper functionality and to maximize your user experience.

제품 끝view

The LinQ CLS-URC-5706 is a versatile universal remote control featuring 57 keys for comprehensive control over various home entertainment systems. Its 6-in-1 capability allows it to replace multiple original remote controls, simplifying your setup.

이미지 1: The NoBrand LinQ CLS-URC-5706 6-in-1 Universal Remote Control shown alongside its retail packaging. The remote is black with clearly labeled buttons for various functions and device types. The packaging highlights its "6 in 1" multi-functionality and model number URC-5706.

설정

1. 배터리 설치

1. 리모콘 뒷면에서 배터리함을 찾으세요.
2. 배터리 덮개를 아래로 밀거나 걸쇠를 누르고 들어올려 엽니다.
3. Insert two new AAA alkaline batteries (not included), ensuring the positive (+) and negative (-) terminals match the diagrams inside the compartment.
4. 배터리 덮개를 다시 끼우고, 제자리에 단단히 고정되었는지 확인하세요.

2. 장치 프로그래밍

The LinQ CLS-URC-5706 remote requires programming to control your specific devices. This typically involves entering a code corresponding to your device's brand. Refer to the code list provided with your remote (if available) or use the auto-search function.

General Programming Steps (Consult your remote's specific code list for detailed instructions):

1. Identify Device Type: 원하는 장치 버튼을 길게 누르세요(예: TV, DVD, 디비-티, 보조, 비디오, 앉았다표시등이 켜질 때까지 약 3초 동안 기다리십시오.
2. 코드를 입력하세요: Using the numeric keypad, enter the 3 or 4-digit code for your device's brand. The indicator light should turn off after successful code entry.
3. 테스트 기능: Point the remote at your device and test basic functions like Power (모두 끄기), 용량 (볼륨+/권), and Channel (CH+/CH-). If the device responds, programming is complete.
4. 문제 해결: If the device does not respond, repeat the process with the next code listed for your brand, or try the auto-search method if available.

Note: Specific programming methods and code lists vary. Always refer to the detailed instructions that came with your remote for the most accurate programming procedure.

작동 지침

Once programmed, operating your LinQ CLS-URC-5706 remote is straightforward.

• 장치 선택: 해당 기기 버튼을 누르세요(TV, DVD, 디비-티, 보조, 비디오, 앉았다) once to select the device you wish to control. The indicator light may flash to confirm selection.
• 전원 켜기/끄기: 사용하세요 모두 끄기 button to power off all programmed devices, or the specific device's power button (if available and programmed) to control individual devices.
• 볼륨 조절: 사용 볼륨+ 그리고 권 buttons to adjust the volume. Press 음소거 오디오를 음소거하려면.
• 채널 탐색: 사용 CH+ 그리고 CH- buttons to change channels. Use the numeric keypad (0-9) for direct channel entry.
• 메뉴 및 탐색: 그만큼 메뉴 button accesses device menus. Use the directional arrow buttons (up, down, left, right) and OK 선택 항목을 탐색하고 확인하는 버튼입니다.
• 재생 컨트롤: For DVD/VCR/DVB-T devices, use buttons like 놀다, 정지시키다, 멈추다, 리우, FF, 기록 (if programmed).
• 추가 기능: 버튼 같은 것들 전자책 (Electronic Program Guide), 정보, 텍스트, 랭 (Language), TV/AV (Input Source), 줌, 매크로, 그리고 이동 provide access to specific features of your devices, depending on their compatibility and programming.

유지

• 청소: 리모컨은 부드럽고 마른 천으로 닦으세요. 잘 지워지지 않는 오염은 가볍게 닦아주세요.amp물이나 순한 세척액을 천에 적신 후 즉시 마른 천으로 닦아주세요. 연마성 세제나 용제를 사용하지 마세요.
• 배터리 교체: Replace batteries when the remote's indicator light becomes dim or if the remote stops responding. Always replace both batteries at the same time with new ones of the same type. Remove batteries if the remote will not be used for an extended period to prevent leakage.
• 저장: 리모컨은 직사광선과 극한의 온도를 피해 서늘하고 건조한 곳에 보관하세요.

문제 해결

• 리모컨이 작동하지 않음 :
  • 배터리가 올바른 극성에 맞게 올바르게 삽입되었는지 확인하세요.
  • 오래된 배터리를 새 배터리로 교체하십시오.
  • 리모컨과 장치 사이에 장애물이 없는지 확인하세요.
  • Verify that the correct device mode (TV, DVD, etc.) is selected.
• 프로그래밍 후 장치가 응답하지 않습니다:
  • Re-enter the programming code, ensuring accuracy.
  • Try other codes listed for your device brand.
  • 리모컨이 기기의 적외선 수신기를 직접 향하도록 하십시오.
  • Attempt the auto-search programming method if available for your remote.
• 일부 기능이 작동하지 않습니다.
  • Not all functions of your original remote may be supported by a universal remote.
  • Ensure the remote is in the correct device mode.
  • Some advanced functions may require specific programming or may not be available for all device models.

명세서

보증 및 지원

For warranty information or technical support, please refer to the documentation included with your purchase or contact the retailer where the product was acquired. Specific warranty terms and support channels may vary by region and seller.