1. 이상view
The NZXT H200 is a compact Mini-ITX PC gaming case designed for enthusiasts seeking a small form factor build without compromising on features or aesthetics. It features an all-steel construction, a tempered glass side panel, and an integrated cable management system for a clean and organized build. The case supports water cooling configurations and includes two pre-installed Aer F fans for optimal airflow.
그림 1: 전면 view of the NZXT H200 Mini-ITX PC Gaming Case.
2. 설정 및 설치
This section guides you through the process of setting up your NZXT H200 case and installing your PC components.
2.1 케이스 열기
To access the interior, first remove the tempered glass side panel by unscrewing the captive thumb screws. For the rear panel, locate the small push-button mechanism on the back of the case, above the I/O shield area. Pressing this button will release the rear panel, allowing access to the cable management area and accessory box. Handle panels carefully to avoid damage.
그림 2: 후면 view of the NZXT H200 case, highlighting the panel release mechanism.
2.2 마더 보드 설치
- Ensure the I/O shield (if not integrated with your motherboard) is installed into the case's rear opening.
- 케이스 내부의 스탠드오프에 맞춰 미니 ITX 마더보드를 정렬하십시오.
- 부속품 상자에 들어 있는 나사를 사용하여 마더보드를 고정하십시오.
2.3 전원 공급 장치 설치
The NZXT H200 supports a bottom-mount power supply. Slide your power supply into the designated compartment at the bottom rear of the case and secure it with screws from the exterior rear panel.
2.4 드라이브 설치
The case provides multiple mounting points for 2.5-inch SSDs and 3.5-inch HDDs. Utilize the removable drive trays and cages located behind the motherboard tray and on the PSU shroud. Secure drives with the appropriate screws.
2.5 케이블 관리
Utilize the integrated cable management bar and routing channels behind the motherboard tray. Velcro straps are provided to secure cables, ensuring a clean interior and optimal airflow.
그림 3: 내부 view 쇼씨asing the cable management system.
2.6 냉각 시스템
The H200 comes with two pre-installed Aer F fans. Additional fan and radiator mounting points are available for enhanced air or liquid cooling configurations. Ensure proper fan direction for optimal airflow.
Figure 4: Internal layout of the NZXT H200, showing fan placement and component areas.
3. PC 케이스 작동 방법
Once all components are installed and secured, and all necessary cables are connected, you can close the case panels. Connect your peripherals, monitor, and power cable to your PC. Use the power button on the top panel to turn on your system. The case is designed to provide efficient airflow for your components, contributing to stable system operation.
4. 유지관리
정기적인 유지관리는 PC 구성 요소의 최적의 성능과 수명을 보장하는 데 도움이 됩니다.
4.1 먼지 필터 청소
The NZXT H200 includes removable dust filters. Periodically remove and clean these filters to prevent dust buildup inside the case, which can impede airflow and cooling efficiency. Use compressed air or a soft brush to remove dust.
4.2 강화유리 패널 관리
강화 유리 패널은 부드럽고 보풀이 없는 천과 비마모성 유리 세정제를 사용하여 닦으세요. 유리에 흠집을 낼 수 있는 강한 화학 물질이나 연마재는 사용하지 마세요.
4.3 General Case Cleaning
케이스 외부를 부드러운 천으로 닦아주세요.amp cloth. Ensure the case is powered off and unplugged before cleaning.
5. 문제 해결
이 섹션에서는 일반적으로 발생할 수 있는 문제에 대해 설명합니다.
5.1 Difficulty Opening Rear Panel / Finding Accessories
As noted in the setup section, the rear panel is released by a small push-button on the back of the case. The accessory box and manual are typically located within a 3.5-inch HDD enclosure in the lower chamber, accessible once the rear panel is open.
5.2 Cable Routing Challenges
If you encounter difficulties with cable routing, ensure you are utilizing the dedicated cable management channels and Velcro straps. The main 24-pin ATX motherboard connector might require careful routing around the central cable management bar.
5.3 Insufficient Airflow or High Temperatures
Verify that all fans are correctly installed and oriented to create an effective airflow path (intake and exhaust). Ensure dust filters are clean and not obstructed. Check that no internal cables are blocking airflow.
추가적인 도움이 필요하시면 NZXT 지원팀에 문의하십시오. web사이트를 방문하거나 고객 서비스에 문의하세요.
6. 사양
| 특징 | 사양 |
|---|---|
| 상표 | NZXT |
| 모델명 | NZXT H200 |
| 마더보드 호환성 | 미니 ITX |
| 케이스 유형 | 데스크탑 |
| 재료 | 합금강, 강화유리 |
| 냉각 방식 | 공기, 물 |
| 팬 수 | 2(사전 설치됨) |
| 품목 무게 | 13.2 파운드 |
| 총 USB 포트 | 2(USB 2.0) |
| Internal Bays Quantity | 3 (for 3.5-inch and 2.5-inch drives) |
| 전원 공급 장치 장착 유형 | 바텀 마운트 |
7. 보증 및 지원
7.1 보증 정보
The NZXT H200 PC Gaming Case comes with a 2년 보증 구매일로부터. 본 보증은 정상적인 사용 중 발생하는 재료 및 제조상의 결함에 적용됩니다. 보증 청구를 위해 구매 증빙 자료를 보관해 주십시오.
7.2 고객 지원
For technical support, troubleshooting assistance, or warranty inquiries, please visit the official NZXT web사이트에서 www.nzxt.com/support. You can find FAQs, driver downloads, and contact information for their support team.