Amazon Basics Commercial Outdoor Patio Heater

1. 서론

This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your Amazon Basics Commercial Outdoor Patio Heater. Please read all instructions carefully before use and retain this manual for future reference.

Figure 1.1: The Amazon Basics Commercial Outdoor Patio Heater in Bahama Blue. This heater is designed for outdoor use, providing warmth for patios, cafes, and other outdoor spaces.

2. 중요한 안전 정보

WARNING: For outdoor use only. Never operate this heater indoors or in enclosed spaces.

• 히터를 작동할 때는 항상 적절한 환기를 확보하십시오.
• Keep flammable materials at least 3 feet (0.9 meters) away from the heater's top and sides.
• 이 기기나 다른 기기 근처에서 가솔린이나 기타 가연성 증기 및 액체를 보관하거나 사용하지 마십시오.
• 히터가 작동하는 동안에는 절대로 자리를 비우지 마십시오.
• Ensure the heater is placed on a firm, level surface. The integrated safety auto shut-off tilt valve will activate if the heater tips over.
• Always turn off the gas supply at the LPG tank after each use.
• Do not attempt to repair or alter the heater. Contact qualified service personnel for repairs.
• 히터에서 어린이와 애완동물을 멀리하세요.

3. 패키지 내용

Verify that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, do not attempt to assemble or operate the heater. Contact Amazon Basics customer service.

• Heater Head Assembly (Burner, Reflector)
• 메인 폴
• Base Assembly (including wheels and waterbox)
• LPG Tank Housing
• 하드웨어 팩 (나사, 너트, 와셔)
• 레귤레이터 및 호스 어셈블리
• 사용 설명서

4. 조립 설명서

Assembly typically requires two people. Follow these steps carefully.

1. 바퀴를 받침대에 부착: Secure the wheel assembly to the heater base using the provided hardware. This allows for easy mobility.
2. Assemble LPG Tank Housing: Connect the panels of the LPG tank housing around the base. Ensure the access door is correctly positioned.
3. Secure Main Pole: Attach the main pole to the center of the base assembly. Ensure it is firmly tightened.
4. Install Heater Head: Carefully place the heater head assembly onto the top of the main pole. Secure it with the designated screws.
5. 반사판 부착: Mount the large reflector dish to the top of the heater head, ensuring it is centered and stable.
6. 레귤레이터와 호스 연결: Connect the regulator and hose assembly to the heater's gas inlet. Ensure all connections are tight.

Figure 4.1: The base of the patio heater, showing the integrated wheels for mobility and the compartment designed to house an LPG tank. A chain is provided to secure the tank.

그림 4.2: 이상view of the heater's main features, including its powerful 46,000 BTU heat output, the safety shut-off tilt valve, and the Piezo ignition system for easy starting.

5. 설정

1. 놓기: Position the heater on a firm, level, non-combustible surface in an open outdoor area. Ensure there is ample clearance from walls, ceilings, and any flammable objects.
2. Install LPG Tank: Open the access door on the LPG tank housing. Place a standard 20 lb (9 kg) LPG tank (not included) inside the base. Use the provided chain to secure the tank.
3. LPG 탱크를 연결하십시오: Connect the regulator hose to the LPG tank valve. Turn the connection clockwise until hand-tight. Do not overtighten.
4. 누출 테스트: Before first use and after every tank change, perform a leak test. Apply a soapy water solution to all gas connections. If bubbles appear, there is a leak. Tighten connections or replace parts as necessary. Do not operate the heater if a leak is detected.
5. Add Weight (Optional): The base includes a waterbox. Filling this with water or sand can add stability, especially in windy conditions.

6. 사용 설명서

1. 개방형 가스 공급: Slowly turn the valve on the LPG tank counter-clockwise to open the gas supply.
2. 점화 히터: Press and hold the control knob down, then rotate it to the 'PILOT' position. Press the red 'IGNITER' button repeatedly until the pilot flame ignites. Continue to hold the control knob down for 10-15 seconds after ignition to allow the thermocouple to heat up.
3. 열 조절: Once the pilot is lit and stable, release the control knob. Rotate the control knob to the 'LOW' or 'HIGH' position to achieve the desired heat output.
4. 종료: To turn off the heater, rotate the control knob to the 'OFF' position. Then, turn the valve on the LPG tank clockwise to close the gas supply completely.

Figure 6.1: The control panel of the heater, featuring the control knob to turn the heat on/off and adjust intensity, and the red Piezo igniter button for easy startup.

7. 유지관리

• 청소: Regularly clean the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the heater is cool and the gas supply is off before cleaning.
• 반사기: Keep the reflector free of dust and debris to ensure maximum heat reflection.
• 연소기: Periodically inspect the burner and pilot assembly for spider webs or other obstructions. Clean with a soft brush if necessary.
• 저장: When not in use for extended periods, disconnect the LPG tank and store it in a well-ventilated outdoor area. Cover the heater with a weather-resistant cover to protect it from the elements. Secure the patio heater when not in use to avoid any potential damage.

8. 문제 해결

9. 사양

• 모델: B07CH4XCTY
• 색상: Bahama Blue
• 열 출력 : 46,000 BTU
• 가열 방법: 프로판 (LPG)
• 점화 시스템: 피에조 점화
• 안전 기능: Auto shut-off tilt valve
• 건축 자재: Aluminum, sturdy plastic, rugged steel with powder-coated finish
• 크기(가로x세로x높이): Approximately 18 x 18 x 89 inches (33D x 18W x 89H Centimetres)
• 품목 무게: 약 40kg(18.1파운드)
• 유동성: Wheel assembly included
• 전원: 가스 동력
• 실내/실외 사용: 야외 전용

그림 9.1: 차원view of the patio heater, indicating its height and width for planning placement and storage.

10. 보증 및 지원

This Amazon Basics Commercial Outdoor Patio Heater is backed by an Amazon Basics 1-year limited warranty. For warranty claims, technical support, or to inquire about replacement parts, please contact Amazon customer service directly. You can find contact information on the Amazon web웹사이트 또는 구매 내역을 통해 확인하실 수 있습니다.

For more information about Amazon Basics products, visit the 아마존 베이직스 스토어.