MICRO RC S10 Advanced Quadcopter Drone

소개

구매해주셔서 감사합니다asing the MICRO RC S10 Advanced Quadcopter Drone. This manual provides essential information for the safe operation, setup, and maintenance of your drone. Please read this manual thoroughly before operating the device to ensure proper function and to prevent damage.

안전 공지: Always operate the drone in open, clear areas, away from people, animals, and obstacles. Ensure all local regulations regarding drone operation are followed. Adult supervision is recommended for younger users.

제품 끝view

The MICRO RC S10 is an advanced quadcopter drone equipped with an HD video camera, offering features such as one-key takeoff, headless mode, and Wi-Fi video transmission for an enhanced flying experience. Its compact design and intuitive controls make it suitable for various users.

Image: The MICRO RC S10 Advanced Quadcopter Drone, white color variant, showcasing its four propellers and central body with camera.

주요 특징:

• HD Video Camera (1080p resolution)
• Wi-Fi Connectivity for real-time video transmission and APP control
• Air Pressure Fixed High Hover for stable flight
• 원터치 이착륙
• 제어를 간소화하는 헤드리스 모드
• 360-degree Roll Function
• Trajectory Flight and Gravity Sensor Control via APP
• One-Key Return function

패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• MICRO RC S10 Quadcopter Drone
• 원격 제어
• Rechargeable Drone Battery (650mAH)
• HD 카메라 모듈
• USB 충전 케이블
• 예비 프로펠러
• 사용 설명서 (본 문서)

설정

1. 드론 배터리 충전

1. 드론 배터리를 USB 충전 케이블에 연결합니다.
2. USB 케이블을 5V/1A USB 전원 어댑터(별도 구매) 또는 컴퓨터 USB 포트에 연결하세요.
3. The charging indicator light will show the charging status. Refer to the charging cable's specific indicator behavior for full charge notification.
4. 충전은 일반적으로 60~90분 정도 소요됩니다. 과충전하지 마십시오.

2. 드론 배터리 설치

• Open the battery compartment on the underside of the drone.
• Insert the fully charged battery, ensuring correct polarity.
• 배터리 칸을 단단히 닫으세요.

3. Installing the Camera Module

• Locate the camera mounting slot on the drone.
• Gently slide the camera module into the slot until it clicks into place.
• Connect the camera's power cable to the designated port on the drone.

4. 리모컨 배터리 설치

• 리모컨 뒷면의 배터리 커버를 엽니다.
• Insert 3x AAA batteries (not included), observing the correct polarity (+/-).
• 배터리 덮개를 닫습니다.

5. Propeller Installation/Check

• Ensure propellers are securely attached. If replacing, match propellers marked 'A' to motor shafts 'A' and 'B' to motor shafts 'B'.

작동 지침

1. 전원 켜기 및 페어링

1. 드론을 평평하고 평평한 표면에 놓습니다.
2. 드론의 전원 버튼을 표시등이 깜박일 때까지 길게 누릅니다.
3. 리모컨을 켜세요. 리모컨 표시등이 깜빡일 것입니다.
4. Push the left joystick (throttle) fully up, then fully down. The drone and remote lights will become solid, indicating successful pairing.

2. 교정

• After pairing, push both joysticks down and to the right simultaneously for 2-3 seconds. The drone lights will flash rapidly and then become solid, indicating successful gyroscope calibration.

3. 기본 비행 제어

• 원키 이륙: Press the one-key takeoff button (usually marked with an upward arrow). The drone will automatically ascend to a stable hovering height.
• 스로틀(왼쪽 조이스틱 위/아래): 고도를 조절합니다. 위로 밀면 상승하고, 아래로 당기면 하강합니다.
• 요(왼쪽 조이스틱 좌/우): Controls rotation. Push left to rotate counter-clockwise, push right to rotate clockwise.
• 앞/뒤 이동 (오른쪽 조이스틱 위/아래): 앞뒤 움직임을 제어합니다.
• 좌우 측면 비행 (오른쪽 조이스틱을 좌우로 조작): Controls strafing left and right.
• 원키 랜딩: Press the one-key landing button (usually marked with a downward arrow). The drone will automatically descend and land.

4. 고급 기능

• 헤드리스 모드: Press the headless mode button. In this mode, the drone's orientation is relative to the pilot, regardless of the drone's actual front. Press again to exit.
• 원키 리턴: Press the one-key return button. The drone will attempt to fly back towards its takeoff point. This feature relies on the drone's internal compass and may not be perfectly accurate.
• 360도 회전: Fly the drone to a height of at least 3 meters. Press the 360-degree roll button, then push the right joystick in the desired direction (forward, backward, left, or right) to perform a flip.

5. APP Control and Wi-Fi Video Transmission

1. Download the designated APP (refer to packaging or quick start guide for APP name) from your smartphone's app store.
2. 드론을 켭니다.
3. On your smartphone, go to Wi-Fi settings and connect to the drone's Wi-Fi network (e.g., "WIFI-UFO-XXXXXX").
4. Open the APP. You should see a live video feed from the drone's camera.
5. Use the APP for additional features like voice control, trajectory flight, gravity sensor control, and to capture photos/videos directly to your phone.

유지

• 청소: 드론과 리모컨은 부드럽고 마른 천으로 닦아주세요. 물이나 독한 화학 약품은 사용하지 마십시오.
• 배터리 관리 : Store batteries in a cool, dry place. Do not fully discharge or overcharge batteries. If storing for extended periods, charge to approximately 50%.
• 프로펠러 교체: If a propeller is damaged, carefully remove it and replace it with a spare, ensuring the correct 'A' or 'B' type is used for the corresponding motor.
• 저장: 사용하지 않을 때는 드론과 구성품을 직사광선과 극한 온도 변화를 피해 안전한 장소에 보관하십시오.

문제 해결

• 드론 전원이 켜지지 않음: Ensure the battery is fully charged and correctly inserted. Check the power button.
• 드론이 리모컨과 페어링되지 않습니다: Ensure both drone and remote are powered on. Repeat the pairing sequence (left joystick up then down). Ensure no other strong Wi-Fi interference is present.
• 불안정한 비행/드리프트: Perform gyroscope calibration on a flat surface. Check for damaged propellers and replace if necessary. Adjust trim controls on the remote if available.
• Camera not working/No video feed: Ensure the camera module is securely connected to the drone. Verify your smartphone is connected to the drone's Wi-Fi network and the APP is open.
• 짧은 비행 시간: Ensure the battery is fully charged. Battery performance can degrade over time; consider replacing old batteries.

명세서

보증 및 지원

For warranty information, technical support, or service inquiries, please refer to the contact information provided on the product packaging or the official MICRO RC web사이트. 구매 증빙 자료로 구매 영수증을 보관하세요.