TC Electronic FLUORESCENCE SHIMMER REVERB

TC Electronic FLUORESCENCE SHIMMER REVERB Pedal User Manual

Model: FLUORESCENCE SHIMMER REVERB

소개

The TC Electronic FLUORESCENCE SHIMMER REVERB is a shimmering, super-bright reverb pedal designed to create ethereal reverb sounds. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your pedal.

TC Electronic FLUORESCENCE SHIMMER REVERB pedal, top-down view showing four control knobs and footswitch.

그림 1: 상단 view of the FLUORESCENCE SHIMMER REVERB pedal.

  • Shimmering Reverb: Creates bright, ethereal reverb effects.
  • Intuitive 4-Knob Interface: Simple controls for easy sound shaping.
  • 트루 바이패스: Ensures ultimate signal integrity when the effect is disengaged.
  • 내구성 있는 구조: Features a robust metal chassis for roadworthy reliability.

설정

Follow these steps to connect your FLUORESCENCE SHIMMER REVERB pedal:

  1. 전원 연결: Connect a 9V DC, 100mA power adapter (center negative) to the power input jack on the pedal. This pedal operates on corded electric power.
  2. 입력 연결: Connect your guitar or other instrument to the 1/4 inch (6.35mm) INPUT jack on the pedal using a standard instrument cable.
  3. 출력 연결: Connect the 1/4 inch (6.35mm) OUTPUT jack of the pedal to your amp앰프 또는 신호 체인의 다음 이펙트 페달입니다.
  4. 놓기: For optimal shimmer reverb effects, place the FLUORESCENCE SHIMMER REVERB pedal towards the end of your effects chain, typically after modulation and drive pedals, but before delay pedals.
뒤쪽 view of the TC Electronic FLUORESCENCE SHIMMER REVERB pedal showing input, output, and power jacks.

그림 2: 후면 view showing input, output, and power connections.

페달 조작하기

The FLUORESCENCE SHIMMER REVERB pedal features a straightforward 4-knob interface for easy control over your sound:

Close-up of the TC Electronic FLUORESCENCE SHIMMER REVERB pedal's control knobs: Reverb, Mix, Tone, Shimmer.

Figure 3: Control knobs for the FLUORESCENCE SHIMMER REVERB pedal.

  • 리버브 노브: Controls the overall decay time and size of the reverb effect. Turning it clockwise increases the length and spaciousness of the reverb.
  • 믹스 노브: Adjusts the balance between your dry (unaffected) signal and the wet (effected) signal. Turn clockwise for more reverb effect, counter-clockwise for less.
  • 톤 노브: Shapes the tonal character of the reverb. This control allows you to brighten or darken the shimmer effect, from warm and subtle to crisp and cutting.
  • 쉬머 노브: This dedicated control adds an octave-up effect to the reverb tail, creating the signature ethereal, shimmering sound. Increase for a more pronounced shimmer.
  • 풋스위치: Engages or disengages the effect. The pedal features true bypass, ensuring your signal remains unaffected when the pedal is off.

유지

To ensure the longevity and optimal performance of your FLUORESCENCE SHIMMER REVERB pedal, follow these maintenance guidelines:

  • 청소: 페달 외부를 닦을 때는 부드럽고 마른 천을 사용하십시오. 마감재를 손상시킬 수 있는 연마성 세척제나 용제는 사용하지 마십시오.
  • 저장: 페달은 직사광선과 극한의 온도를 피해 서늘하고 건조한 곳에 보관하세요.
  • 사이: 모든 케이블 연결 부위의 마모나 손상을 주기적으로 점검하세요. 잭에 먼지나 이물질이 없는지 확인하세요.
  • 전원 공급 장치: Always use a regulated 9V DC, 100mA (center negative) power supply. Using an incorrect power supply can damage the unit and void the warranty.
  • 신체 관리: The pedal features a durable metal chassis. However, avoid dropping the unit or subjecting it to excessive force to prevent internal damage.

문제 해결

If you encounter issues with your FLUORESCENCE SHIMMER REVERB pedal, consult the following common solutions:

문제가능한 원인해결책
소리가 나지 않거나 신호가 약함Incorrect cable connections, faulty cables, no power, pedal disengaged.Verify all cables are securely connected. Test with different cables. Ensure power supply is connected and functional. Press the footswitch to engage the effect.
리버브 효과 없음MIX knob set too low, REVERB knob set too low, pedal disengaged.Increase the MIX and REVERB knob settings. Ensure the pedal is engaged.
원치 않는 소음이나 윙윙거림Faulty power supply, ground loop, interference from other pedals/equipment.Use a high-quality, isolated power supply. Try connecting the pedal to a different power outlet. Ensure all cables are shielded and in good condition.
Shimmer effect is too subtle or too intenseSHIMMER knob setting.Adjust the SHIMMER knob to achieve the desired intensity. Experiment with the TONE knob to fine-tune the character.

명세서

  • 모델: FLUORESCENCE SHIMMER REVERB
  • ASIN: B079Y519PH
  • 품목 무게: 1.1파운드(0.5킬로그램)
  • 제품 크기: 5.2 x 2.91 x 2.28 인치
  • 본체 소재 : 금속
  • 색상: 파란색
  • 커넥터 유형: 1/4인치(6.35mm) 오디오 잭
  • 하드웨어 인터페이스: 1/4인치 오디오
  • 전원: 코드식 전기
  • 권tage: 9V DC (100mA, center negative recommended)
  • 첫 이용 가능 날짜: 27년 2018월 XNUMX일

보증 및 지원

TC Electronic products are designed and manufactured to high standards. For detailed warranty information and technical support, please refer to the official TC Electronic web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

추가 지원을 받으려면 다음을 방문하세요. 아마존의 TC 전자제품 매장.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.