uxcell 1/4 Inch Drive 8mm 6-Point Deep Socket Instruction Manual

제품 끝view

This manual provides instructions for the uxcell 1/4-inch drive, 8mm 6-point deep socket. This tool is designed for various fastening tasks in household maintenance, DIY projects, and general repairs. It is crafted for durability and efficient performance.

주요 특징

• 크기: 1/4-inch drive, 8mm 6-point socket, with a total length of 50mm (2-inch).
• 재료: Constructed from premium chrome vanadium steel (Cr-V) for enhanced strength and durability.
• 마치다: Features a mirror chrome plated finish to resist corrosion and ensure longevity.
• 6-Point Design: The high-torque 6-point design grips the flat sides of fasteners, not the corners, which helps prevent round-off.
• Deep Broach: The extra-deep broach allows the socket to reach over longer threaded shafts, providing access to nuts that standard sockets cannot reach.
• 안전한 첨부 파일: Detent notches in the drive end securely lock onto ratchets and extension bars.

설정 및 설치

The uxcell deep socket is designed for use with a 1/4-inch drive ratchet, extension bar, or other compatible drive tools. Follow these steps for proper setup:

1. 올바른 구동 도구를 선택하십시오: Ensure your ratchet or extension has a 1/4-inch square drive.
2. 소켓을 부착하세요: Align the square opening of the socket with the drive end of your tool. Push firmly until the detent ball on the drive tool engages with the detent notch inside the socket, securing it in place.
3. 적합성 확인: 사용하기 전에 소켓을 살짝 당겨서 제대로 고정되었는지 확인하십시오.

작동 지침

Always ensure the socket size precisely matches the fastener head to prevent damage to both the fastener and the tool.

1. 소켓 위치 지정: Place the socket squarely over the fastener head. Ensure it is fully seated.
2. 힘을 가하세요: Use your ratchet or drive tool to turn the fastener. For tightening, turn clockwise. For loosening, turn counter-clockwise.
3. 통제 유지: Apply steady, controlled force. Avoid sudden jerking motions, which can cause slippage or damage.
4. Deep Socket Advantage: Utilize the deep design to access fasteners on longer threaded shafts without obstruction.

안전 예방 조치:

• Do not use damaged sockets. Inspect tools before each use.
• 날아오는 파편으로부터 자신을 보호하기 위해 안전 안경 등 적절한 개인 보호 장비를 착용하세요.
• Do not use extension bars or 'cheater pipes' to increase leverage on the ratchet handle, as this can overload the tool and cause breakage or injury.
• 토크를 가하기 전에 공작물이 안정적이고 단단히 고정되었는지 확인하십시오.

유지

Proper maintenance extends the life of your uxcell deep sockets and ensures continued reliable performance.

• 청소: After each use, wipe the socket clean of dirt, grease, and debris. A clean cloth is usually sufficient. For stubborn grime, use a mild degreaser and rinse thoroughly.
• 저장: Store sockets in a dry environment to prevent rust. A socket rail or toolbox compartment is recommended to keep them organized and protected from impact.
• 점검: Periodically inspect sockets for signs of wear, cracks, chips, or any other damage. Discard any damaged sockets immediately to prevent injury or damage to fasteners.
• 부식 방지: The chrome plated finish provides excellent corrosion resistance. For long-term storage in humid conditions, a light coat of rust preventative oil can be applied.

문제 해결

소켓이 패스너에 끼워집니다.

Ensure the socket size precisely matches the fastener. The 6-point design minimizes slippage, but an incorrect size will cause issues. Check for worn fastener heads or damaged sockets.

Socket does not fit on drive tool:

Verify that your drive tool has a 1/4-inch square drive. Ensure no debris is obstructing the connection. The detent ball on the drive tool must align with the detent notch in the socket for a secure fit.

Socket shows signs of rust:

Although chrome plated, prolonged exposure to moisture or harsh chemicals can cause rust. Clean any rust with a wire brush or rust remover and apply a rust preventative oil. Always store in a dry place.

명세서

For additional product details, please refer to the product listing or contact uxcell customer support.

보증 및 지원

For information regarding warranty coverage and customer support for your uxcell product, please refer to the official uxcell website or contact the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.

일반 문의 또는 기술 지원이 필요하시면 다음 웹사이트를 방문하십시오. uxcell Store on Amazon.