Amazon Basics AZSW3T1A-4K2K

Amazon Basics 4K HDMI 3 Port Switch

Model: AZSW3T1A-4K2K

소개

The Amazon Basics 4K HDMI 3 Port Switch allows you to connect up to three HDMI source devices to a single HDMI display, such as a TV or projector. This device is ideal for expanding the HDMI input capabilities of your display, enabling seamless switching between various entertainment or work devices. It supports 4K resolution at 30Hz and is HDCP compliant, ensuring compatibility with a wide range of modern equipment.

안전 정보

  • 사용하기 전에 모든 지침을 주의 깊게 읽으세요.
  • 기기를 습기, 극한의 온도 또는 직사광선에 노출시키지 마세요.
  • 제공된 USB 전원 케이블만 사용하십시오.
  • 어린이의 손이 닿지 않는 곳에 보관하세요.
  • 기기를 직접 분해하거나 수리하려고 하지 마십시오. 필요한 경우 자격을 갖춘 서비스 담당자에게 문의하십시오.

패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

  • Amazon Basics 4K HDMI 3 Port Switch
  • USB 전원 케이블 (옵션 전원용)
  • Remote Control (CR2025 battery not included)
Amazon Basics 4K HDMI 3 Port Switch, remote control, and USB power cable

Image: The HDMI switch, its remote control, and the USB power cable included in the package.

제품 끝view

The HDMI switch features three input ports and one output port, along with a power input and an IR receiver for the remote control.

전면 및 상단 view of the Amazon Basics 4K HDMI 3 Port Switch showing input and output ports

이미지: 자세한 view of the HDMI switch, highlighting the three HDMI input ports (INPUT1, INPUT2, INPUT3), one HDMI output port (OUTPUT), and the DC 5V power input.

전면 패널

  • 전원 LED : 전원 상태를 나타냅니다.
  • LED1/LED2/LED3: 현재 활성화된 HDMI 입력을 표시하십시오.
  • SELECTION Button: HDMI 입력 간에 수동으로 전환합니다.
  • IR 수신기 : 리모콘에서 신호를 수신합니다.

후면 패널

  • HDMI INPUT 1/2/3: Connect your source devices (e.g., game console, Blu-ray player, computer).
  • HDMI 출력: Connect to your display device (e.g., TV, projector, monitor).
  • DC 5V : Power input port (optional for some setups, required for 4K resolution or longer cables).

설정

Follow these steps to connect your HDMI switch:

  1. 소스 장치 연결: Plug your HDMI source devices (e.g., gaming console, media player, computer) into the HDMI INPUT 1, 2, and 3 ports on the switch using HDMI cables (sold separately).
  2. 디스플레이 장치 연결: Connect your TV, monitor, or projector to the HDMI OUTPUT port on the switch using an HDMI cable (sold separately).
  3. Connect Power (Optional/Recommended): Insert the small end of the included USB power cable into the DC 5V port on the switch. Plug the USB-A end into a USB power adapter (not included) or a USB port on your TV/computer. While the switch can draw power from HDMI sources, connecting the USB power cable is recommended for stable performance, especially with 4K resolutions or longer HDMI cables.
  4. 전원 켜기: Ensure all connected devices and the display are powered on. The switch will automatically detect the active input or you can select it manually.
Amazon Basics 4K HDMI 3 Port Switch connected to a laptop and a display

Image: The HDMI switch connected to a laptop via an HDMI input, with the output connected to a display (not fully visible). This illustrates a typical setup.

운영

The HDMI switch offers two methods for selecting inputs:

자동 전환

The switch is designed to automatically detect and switch to a newly activated HDMI source. If multiple sources are active, it will typically prioritize the lowest numbered input (Input 1, then Input 2, etc.) or the last active input.

수동 전환

  • Using the SELECTION Button: Press the 'SELECTION' button on the front panel of the switch to cycle through the available HDMI inputs (Input 1 → Input 2 → Input 3 → Input 1...). The corresponding LED will illuminate to indicate the active input.
  • 리모컨 사용하기: Point the remote control towards the IR receiver on the front of the switch. Press the desired input number button (1, 2, or 3) to switch directly to that input. Ensure a CR2025 battery is installed in the remote control.

문제 해결

문제가능한 원인해결책
No picture/signal on display.
  • 느슨한 HDMI 케이블.
  • 잘못된 입력이 선택되었습니다.
  • 전원이 부족합니다.
  • Incompatible resolution.
  • 모든 HDMI 케이블이 제대로 연결되어 있는지 확인하세요.
  • Manually select the correct input using the button or remote.
  • Connect the USB power cable to a reliable power source.
  • Verify your display and source devices support 4K@30Hz. Try a lower resolution if issues persist.
Picture flickers or drops out.
  • HDMI 케이블이 너무 길거나 품질이 떨어지는 경우.
  • 전원이 부족합니다.
  • HDCP handshake issue.
  • Use shorter, high-quality HDMI cables (certified for 4K).
  • Ensure the USB power cable is connected and providing stable power.
  • 연결된 모든 장치(소스, 스위치, 디스플레이)를 재시작하십시오.
리모컨이 작동하지 않습니다.
  • No battery or dead battery.
  • 리모컨과 스위치 사이에 장애물이 있습니다.
  • 리모컨이 올바르게 향하지 않았습니다.
  • Install a fresh CR2025 battery.
  • Ensure a clear line of sight to the IR receiver on the switch.
  • Point the remote directly at the switch's IR receiver.
Automatic switching not working as expected.Some devices maintain an active signal even when off, preventing auto-switching.Use manual switching via the button on the switch or the remote control.

명세서

특징세부 사항
모델 번호AZSW3T1A-4K2K
HDMI 버전HDMI 1.4 (Supports 4K@30Hz)
HDCP 준수한국어: HDCP 1.4
입력 포트3개의 HDMI
출력 포트1개의 HDMI
지원되는 해상도Up to 4K (3840x2160) @ 30Hz, 1080p, 720p, etc.
오디오 지원다양한 오디오 포맷 지원
전원 공급 장치DC 5V via USB (optional, USB cable included)
제어 방법Manual button, IR remote control
치수(길이 x 너비 x 높이)4.49 x 0.79 x 2.8인치(11.4 x 2.0 x 7.1cm)
무게6.9 온스(195.6그램)

유지

  • 부드럽고 마른 천으로 기기를 닦으세요. 액체 세척제나 에어로졸은 사용하지 마세요.
  • 기기에 먼지와 이물질이 쌓이지 않도록 하여 적절한 환기가 이루어지도록 하십시오.
  • 장기간 사용하지 않을 때에는 시원하고 건조한 곳에 보관하세요.

보증 및 지원

보증 정보 및 고객 지원에 대해서는 Amazon Basics 공식 웹사이트를 참조하십시오. web해당 웹사이트를 방문하거나 아마존 고객 서비스에 직접 문의하십시오. 보증 청구를 위해 구매 영수증을 보관하십시오.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.