Astralpool Aster 99- Sand Filter with Valve (Ø 500) - Instruction Manual

1. 제품 오버view

The Astralpool Aster 99- Sand Filter is a high-performance filtration system designed for swimming pools. Constructed from laminated polyester and fiberglass, this filter ensures durability and efficient water purification. It features a lateral selector valve, a manometer for pressure monitoring, and a drain valve for easy water emptying. This manual provides essential information for the safe and effective installation, operation, and maintenance of your filter.

• 건설: Laminated polyester and fiberglass for enhanced durability.
• 구성 요소: Equipped with a manometer, drain valve, and lateral selector valve.
• 최대 작동 압력 : 2.5 kg/cm².
• Maximum Filtration Capacity: 50 m³/h/m².

2. 설정 및 설치

Proper installation is crucial for the optimal performance and longevity of your Astralpool Aster 99- Sand Filter. Ensure all connections are secure and watertight.

2.1. 부지 선정

Choose a level, solid surface for the filter, preferably close to the pool pump and the pool itself. The location should be protected from direct sunlight and adverse weather conditions, and allow sufficient space for maintenance and operation.

2.2. 필터 어셈블리

1. 필터 위치 지정: Place the filter tank on its designated base.
2. 필터 미디어 추가: Carefully fill the filter tank with the appropriate amount and type of filter sand (or other media) as recommended by Astralpool. Ensure the central pipe is protected during this process to prevent sand from entering it.
3. Install Multi-Port Valve: Attach the lateral selector valve to the top of the filter tank. Ensure the O-ring is correctly seated and the clamp 안전하게 고정되어 있습니다.
4. 배관 연결: Connect the pump outlet to the "PUMP" port on the valve, the pool return line to the "RETURN" port, and the waste line to the "WASTE" port. Use appropriate fittings and sealants to prevent leaks.
5. Manometer Installation: Screw the manometer into its designated port on the multi-port valve.
6. 배수 밸브: Ensure the drain valve at the bottom of the filter is closed.

그림 1: Technical drawing of the Astralpool Aster 99- Sand Filter, illustrating key dimensions (D, H, M, N, K) and overall structure. This diagram helps in understanding the physical layout and connection points of the filter.

3. 사용 설명서

The multi-port valve controls the filter's operation. Always turn off the pump before changing the valve position to prevent damage.

3.1. Valve Positions

• 필터: 일반 여과 모드입니다. 물이 여과재를 통과하여 수영장으로 되돌아갑니다.
• 밀려 나가는 파도: Cleans the filter media by reversing water flow. Water is discharged through the waste line.
• 헹구기: Used after backwashing to settle the filter media and flush out any remaining debris from the waste line.
• 폐수/배수구: Bypasses the filter, sending water directly to the waste line. Useful for vacuuming heavy debris or lowering pool water level.
• 재순환: Bypasses the filter, circulating water directly back to the pool. Useful for chemical distribution without filtration.
• 닫은: Shuts off all flow to the filter and pool. Use for pump maintenance or when the filter is not in use.

3.2. 초기 시작

1. Ensure the filter is filled with sand and all connections are secure.
2. Set the multi-port valve to the "BACKWASH" position.
3. Turn on the pump and backwash for 2-3 minutes, or until the water in the sight glass (if present) runs clear.
4. 펌프를 끕니다.
5. Set the valve to the "RINSE" position.
6. 펌프를 작동시키고 30~60초 동안 헹궈주세요.
7. 펌프를 끕니다.
8. Set the valve to the "FILTER" position.
9. Turn on the pump. The filter is now operating in normal filtration mode.

4. 유지관리

Regular maintenance ensures efficient filtration and extends the life of your Astralpool Aster 99- Sand Filter.

4.1. Backwashing

Backwash the filter when the pressure gauge reading is 0.2-0.3 kg/cm² (3-5 psi) above the clean filter's starting pressure, or when pool water clarity decreases.

1. 펌프를 끕니다.
2. 멀티포트 밸브를 "역세척"으로 설정합니다.
3. Turn on the pump and backwash until the water in the sight glass runs clear (typically 2-3 minutes).
4. 펌프를 끕니다.
5. Set the valve to "RINSE".
6. 펌프를 작동시키고 30~60초 동안 헹궈주세요.
7. 펌프를 끕니다.
8. Set the valve to "FILTER".
9. 정상적인 여과를 재개하려면 펌프를 켜십시오.

4.2. 동파 방지 조치 (해당되는 경우)

In colder climates, proper winterization is essential to prevent freeze damage.

• Drain all water from the filter tank by opening the drain valve.
• Remove the manometer and store it in a warm, dry place.
• Set the multi-port valve handle between two positions (e.g., between "FILTER" and "CLOSED") to relieve pressure on the internal seal.
• Disconnect all plumbing and store pipes if necessary.

5. 문제 해결

This section addresses common issues you might encounter with your sand filter.

6. 기술 사양

Detailed specifications for the Astralpool Aster 99- Sand Filter (Ø 500 model).

• 모델: Aster 99- Ø 500
• 건축 자재: Laminated Polyester and Fiberglass
• 밸브 유형: Lateral Selector Valve
• 포함된 액세서리: Manometer, Drain Valve
• 최대 작동 압력 : 2.5kg/cm²
• Maximum Filtration Capacity: 50m²/h/m²

6.1. Dimensions (for Ø 500 model)

Note: Dimensions are approximate and subject to manufacturing tolerances. Refer to Figure 1 for visual representation of dimensions.

7. 보증 정보

Specific warranty details for Astralpool products are typically provided at the point of purchase or within separate warranty documentation. Please retain your proof of purchase for any warranty claims. For detailed warranty terms and conditions, refer to the official Astralpool web사이트를 방문하거나 공인 딜러에게 문의하세요.

8. 고객 지원

For technical assistance, spare parts, or further inquiries regarding your Astralpool Aster 99- Sand Filter, please contact your local Astralpool dealer or visit the official Astralpool web대지.

Astralpool Official Web대지: www.astralpool.com