소개
This manual provides essential information for the safe and effective use of your Mackie Thump12A 1300W 12-inch Powered Loudspeakers Bundle. Please read this manual thoroughly before operating the equipment to ensure proper setup, operation, and maintenance. Retain this manual for future reference.
안전 정보
감전, 화재 또는 부상의 위험을 줄이려면 항상 다음 안전 예방 조치를 준수하세요.
- 전원: 지정된 용량의 AC 전원 콘센트에만 기기를 연결하십시오.tage.
- 접지: Ensure the power cord is properly grounded. Do not defeat the grounding plug.
- 통풍: 통풍구를 막지 마십시오. 기기 주변에 충분한 공기 흐름이 확보되도록 하십시오.
- 물과 습기: 기기를 비나 습기에 노출시키지 마십시오. 기기 위에 액체가 담긴 물건을 올려놓지 마십시오.
- 열: 장치를 라디에이터, 난방 조절기, 스토브 또는 열을 발생시키는 기타 장치와 같은 열원으로부터 멀리 두십시오.
- 서비스: 이 제품을 직접 수리하려고 하지 마십시오. 모든 서비스는 자격을 갖춘 서비스 담당자에게 문의하십시오.
- 스피커 스탠드: Always ensure speaker stands are stable and properly secured before mounting loudspeakers. Do not exceed the weight capacity of the stands.
패키지 내용
Verify that all items are present in your bundle:
- 2 x Mackie Thump12A 1300W 12-inch Powered Loudspeakers
- 2 x 전원 코드
- 2 x Auray SS-4420 Steel Speaker Stands with 1-1/2" Mounting Adapters
- 2 x XLR-XLR Cables
설정
1. 풀기 및 배치
Carefully remove all components from their packaging. Place the loudspeakers in their desired positions, ensuring they are on a stable, level surface or securely mounted on speaker stands.
그림 1: 전면 view of the Mackie Thump12A Powered Loudspeaker.
2. Mounting on Speaker Stands
- Extend the legs of the Auray SS-4420 Steel Speaker Stand to a stable width.
- Adjust the height of the stand to the desired level, ensuring the locking pin is securely engaged.
- Carefully lift each Thump12A loudspeaker and place its pole-mount socket onto the stand's mounting adapter. Ensure the speaker is seated firmly and securely.
Figure 2: Auray SS-4420 Steel Speaker Stands included in the bundle.
3. 오디오 소스 연결
The Thump12A features an integrated 2-channel mixer with Vita preamps and Wide-Z technology, allowing connection of various sources.
Figure 3: Rear panel of the Mackie Thump12A, showing inputs and controls.
- 마이크: Connect a microphone to either Input 1 or Input 2 using an XLR cable.
- 악기: Connect a Hi-Z instrument (e.g., guitar, bass) directly to Input 1 or Input 2 using a 1/4-inch TS cable.
- 라인 레벨 장치: Connect line-level sources (e.g., mixer, media player) to Input 1 or Input 2 using an XLR or 1/4-inch TRS cable.
Figure 4: XLR-XLR Cables for audio connections.
4. 전원 연결
- 스피커의 전원 스위치가 꺼짐(OFF) 위치에 있는지 확인하십시오.
- Connect the supplied power cord to the AC inlet on the rear panel of the loudspeaker.
- 전원 코드의 다른 쪽 끝을 접지된 AC 전원 콘센트에 꽂습니다.
운영
1. 전원 켜기 / 끄기
To power on, ensure all input levels are turned down, then flip the power switch to the ON position. The front panel LED will illuminate. To power off, turn down all input levels, then flip the power switch to the OFF position.
2. Adjusting Levels
- 입력 이득: Use the GAIN knobs for Input 1 and Input 2 to adjust the sensitivity for each connected source. Start with the gain low and gradually increase until the signal is strong without clipping.
- 마스터 볼륨: The MASTER VOLUME knob controls the overall output level of the loudspeaker. Adjust this to achieve the desired listening volume.
3. Using the Integrated Mixer
The Thump12A features a 2-channel mixer. Each channel has independent gain control. The mixer also includes a 3-band EQ with variable mid-range control and a high-pass filter for each input, allowing you to shape the sound for different sources.
4. Linking Loudspeakers
To expand your sound system, connect the XLR OUTPUT of one Thump12A loudspeaker to an input of another Thump12A loudspeaker using an XLR-XLR cable. This allows you to send the mixed signal from the first speaker to additional speakers.
유지
1. 청소
Clean the exterior of the loudspeaker with a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes. Ensure no liquids enter the speaker grille or control panel.
2. 보관
When not in use, store the loudspeakers in a cool, dry environment, away from direct sunlight and extreme temperatures. If transporting, use appropriate protective covers or cases.
3. 검사
Periodically inspect power cords and audio cables for any signs of damage. Replace damaged cables immediately to prevent electrical hazards or signal loss.
문제 해결
If you encounter issues with your Mackie Thump12A loudspeakers, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전원 없음 / 소리 없음 | Power cord disconnected, power switch off, faulty outlet. | Check power cord connection, ensure power switch is ON, test outlet with another device. |
| 왜곡된 소리 | Input gain too high, master volume too high, faulty cable. | Reduce input gain and/or master volume. Test with different cables. |
| 한 채널에서 소리가 나지 않습니다 | Input cable faulty, gain knob turned down, source issue. | Check cable connection, ensure gain knob is up, verify source is sending signal. |
| 험 또는 소음 | 접지 루프, 케이블 불량, 간섭. | Ensure all equipment is on the same electrical circuit. Try different cables. Move away from power transformers or dimmer packs. |
이러한 해결 방법을 시도한 후에도 문제가 지속되면 고객 지원팀에 문의하세요.
명세서
The following are the technical specifications for the Mackie Thump12A Powered Loudspeaker:
| 특징 | 사양 |
|---|---|
| 모델 번호 | THUMP12A |
| 출력 와트tage | 1300와트(최대) |
| 우퍼 크기 | 12인치 |
| HF 드라이버 | 1.4 inch Titanium Compression Driver |
| 주파수 응답 | 50Hz ~ 23kHz |
| 최대 SPL | 126데시벨 |
| Amp정수기 유형 | D 급 |
| 입력 커넥터 | XLR / 1/4-inch combo (2 channels) |
| 출력 커넥터 | XLR (Mix Out) |
| 치수(길이 x 너비 x 높이) | 14 x 17.4 x 27인치(35.6 x 44.2 x 68.6cm) |
| 품목 무게 | 82 pounds (37.2 kg) (for the bundle, individual speaker weight not specified here) |
| 색상 | 검은색 |
| 전원 | 코드식 전기 |
보증 및 지원
Mackie products are designed for reliability and performance. For warranty information and details on how to obtain service, please refer to the warranty card included with your product or visit the official Mackie website. For technical support, contact Mackie customer service through their official channels.
