AODELAN WTR2 Wireless Timer Shutter Release Instruction Manual

1. 제품 오버view

The AODELAN WTR2 is a versatile wireless timer shutter release system designed for Canon cameras. It functions as both a remote shutter release and a programmable intervalometer, offering precise control over your camera's shutter for various photography techniques.

The system consists of a transmitter (remote control) and a receiver, communicating via a stable 2.4GHz radio frequency signal with a range of up to 60 meters (approximately 200 feet). Its LCD display provides clear information, making it suitable for use in diverse lighting conditions.

주요 특징:

• 이중 기능: Operates as a wireless remote shutter release and a programmable timer.
• Shutter Release Modes: Supports single shot, continuous shooting, 2-second delay, and bulb (long exposure).
• 고급 타이머 기능: Includes delay timer, long exposure timer, interval timer, and exposure count settings.
• Bracketed Long Exposure (BKLN): Automatically captures a series of photos with varying exposure times, ideal for HDR imaging in low-light conditions.
• 높은 정밀도: Time settings are accurate to 0.1 seconds.
• 무선 범위: 2.4GHz radio transmission provides a reliable connection up to 60 meters.
• LCD 디스플레이: Backlit screen for easy operation in bright sunlight or darkness.

Image 1.1: The AODELAN WTR2 system in use for professional photography, highlighting its wireless capability.

Image 1.2: The WTR2 offers both wireless control (transmitter and receiver) and wired control (transmitter directly connected to camera).

2. 패키지 내용

설치를 진행하기 전에 아래 나열된 모든 항목이 패키지에 포함되어 있는지 확인하십시오.

• WTR2 Transmitter (Remote Control)
• WTR2 Receiver
• Shutter Release Cable (specific to Canon cameras)
• 매는 밧줄
• 사용 설명서

Image 2.1: All components included in the AODELAN WTR2 package.

3. 제품 구성 요소 및 제어

Familiarize yourself with the different parts and controls of the WTR2 system:

Image 3.1: Labeled diagram of the WTR2 transmitter and receiver, showing all buttons, ports, and indicators.

송신기(리모컨)

1. 기능 LED
2. LCD 디스플레이
3. Sound/Mode Button
4. Backlight/Lock Button
5. 설정 버튼
6. 재생/중지 버튼
7. Adjustment Buttons (Up/Down/Left/Right)
8. 셔터 버튼
9. 케이블 포트
10. Battery Door (2*AAA)

수화기

1. 전원 버튼
2. Code Setting Button
3. 기능 LED
4. Battery Door (2*AAA)
5. 잠금 링
6. 1/4"-20 Mounting Lug
7. 콜드 슈
8. 케이블 포트

4. 설정

4.1 배터리 설치

1. Open the battery door on both the transmitter and the receiver.
2. Insert two AAA batteries into each unit, ensuring correct polarity.
3. Close the battery doors securely.

4.2 Connecting the Receiver to Your Camera

1. Attach the receiver to your camera's hot shoe or cold shoe mount.
2. Connect one end of the provided shutter release cable to the receiver's cable port.
3. Connect the other end of the shutter release cable to your camera's remote control terminal. Ensure the cable type (e.g., C6 or C8) matches your camera's port.

4.3 전원 켜기 및 페어링

1. Press and hold the Power Button on the receiver to turn it on. The Function LED will illuminate.
2. Press and hold the ON/OFF button on the transmitter to turn it on. The LCD display will light up.
3. The transmitter and receiver should automatically pair. If pairing fails, press the Code Setting Button on the receiver and then the SET button on the transmitter to re-establish the connection.

5. 사용 설명서

The WTR2 offers various modes for controlling your camera's shutter. Use the Mode button to cycle through the available modes.

5.1 Basic Shutter Release Modes

• 한번의: Press the Shutter Button halfway to focus, then fully to take a single photo.
• 연속 촬영 : Press and hold the Shutter Button fully. The camera will continue to shoot as long as the button is held.
• 2초 지연: Press the Shutter Button fully. The camera will fire after a 2-second delay.
• Bulb (Long Exposure): In Bulb mode, press the Shutter Button once to open the shutter, and press it again to close the shutter.

5.2 Timer Modes (Intervalometer)

The WTR2 allows for precise programming of various timer functions. Use the navigation buttons (Up/Down/Left/Right) to select parameters and the SET button to confirm.

Image 5.1: The WTR2 transmitter offers precise timing, accurate to 0.1 seconds.

1. 지연(DELAY): Sets the delay time before the first exposure. Range: 0s to 99h 59m 59s.
2. 장시간 노출(LONG): Sets the exposure time for each shot. This is used in conjunction with your camera's Bulb mode. Range: 0s to 99h 59m 59s.
3. 간격(INTVL): Sets the time between each exposure. Range: 1s to 99h 59m 59s.
4. Number of Exposures (N): Sets the total number of photos to be taken. Range: 1 to 399, or unlimited (--).

5.3 타임랩스 사진 촬영

To set up a time-lapse sequence:

1. Enter the timer mode on the transmitter.
2. 설정하다 지연 if you need a starting delay.
3. 설정하다 긴 exposure time if using Bulb mode on your camera. Otherwise, set it to 0.
4. 설정하다 국제 (interval) to the desired time between shots.
5. 설정하다 N (number of exposures) to the total number of photos or to unlimited (--).
6. Press the Play/Stop button to start the sequence.

이미지 5.2: Example settings for time-lapse photography (Delay: 10s, Long: 0s, Interval: 5s, N: 399).

5.4 Bracketed Long Exposure (BKLN)

The BKLN function is useful for creating HDR images, especially in challenging lighting conditions. It automatically takes multiple exposures with varying exposure times.

1. Enable BKLN mode on the transmitter (refer to the manual for specific button presses).
2. Set the desired exposure bracketing steps.
3. Press the Shutter Button to initiate the bracketed sequence.

Image 5.3: The BKLN feature captures multiple exposures for HDR imaging, useful in low-light scenarios.

5.5 Continuous Shooting with Timer

You can also program continuous shooting with specific intervals.

이미지 5.4: Example settings for continuous shooting (Delay: 5s, Long: 0s, Interval: 2s, N: 5).

6. 유지관리

• 청소: 부드럽고 마른 천을 사용하여 기기를 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
• 배터리 교체: Replace batteries when the low battery indicator appears on the LCD. Always use fresh AAA alkaline batteries.
• 저장: 장기간 사용하지 않을 때는 누액을 방지하기 위해 배터리를 제거하십시오. 직사광선을 피해 서늘하고 건조한 곳에 보관하십시오.
• 습기를 피하세요: 기기를 비, 습기 또는 극한의 온도에 노출시키지 마세요.

7. 문제 해결

• 장치가 켜지지 않음: 배터리 설치를 확인하고 배터리가 새 것인지 확인하세요.
• 셔터가 작동하지 않음: Ensure the receiver is properly connected to the camera and powered on. Check camera settings (e.g., remote control enabled). Verify transmitter and receiver are paired.
• 제한된 범위: Ensure there are no obstructions between the transmitter and receiver. Check battery levels.
• LCD 디스플레이 문제: If the display is dim or flickering, replace batteries.
• 타이밍이 맞지 않음: Double-check all timer settings (DELAY, LONG, INTVL, N) on the transmitter.

8. 사양

9. 보증 및 지원

AODELAN products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included in your product packaging or visit the official AODELAN web대지.

If you encounter any issues or have questions regarding the operation of your WTR2 Wireless Timer Shutter Release, please contact AODELAN customer support through their official channels. Provide your product model number (WTR-2) and a detailed description of the issue for efficient assistance.