DIRECTV RC66RX IR/RF Remote Control User Manual

소개

This manual provides instructions for the DIRECTV RC66RX IR/RF Remote Control. This remote is designed to operate most DirecTV receivers in both Infrared (IR) and Radio Frequency (RF) modes. The RF feature allows control of the receiver without direct line-of-sight. It is compatible with various DirecTV receiver models including R16, R22, H21, H22, H23, H24, HR21, HR22, HR23, HR24, HR34, and C31. Two AA batteries are included with the remote for immediate use.

Figure 1: Two DIRECTV RC66RX Remote Controls with Batteries

설정

1. 배터리 설치

1. 리모콘 뒷면에 있는 배터리함 덮개를 찾으세요.
2. 덮개를 아래로 밀어 수납공간을 엽니다.
3. AA 배터리 두 개를 넣고 양극(+)과 음극(-) 단자가 배터리 보관함 내부의 표시기와 일치하도록 합니다.
4. 배터리 덮개를 제자리에 밀어 넣어 딸깍 소리가 날 때까지 밀어 넣습니다.

Figure 2: Battery Compartment of the RC66RX Remote

2. Programming for DirecTV Receiver

The RC66RX remote is typically pre-programmed to control your DirecTV receiver. If it does not respond, ensure the remote is set to the correct mode (usually 'DIRECTV' or 'SAT' if applicable, though this model primarily functions for DirecTV). For RF mode, your receiver must be compatible (R16, R22, H21, H22, H23, H24, HR21, HR22, HR23, HR24, HR34, C31). Refer to your DirecTV receiver's manual for specific RF pairing instructions if needed.

3. Programming for TV and Other Devices (IR Mode)

To control your television or other devices (e.g., AV receiver) with the RC66RX remote, you will need to program it using IR codes. This allows the remote to control functions like TV power, volume, and input.

1. Locate the mode switch at the top of the remote. Slide it to the 'TV' position.
2. Press and hold the 'MUTE' and 'SELECT' buttons simultaneously until the green light at the top of the remote blinks twice.
3. Enter the 5-digit programming code for your TV brand. You can find these codes in your DirecTV receiver's user manual or on the DirecTV support web대지.
4. Point the remote at your TV and press the 'PWR' button. If the TV turns off, the code is correct.
5. If the TV does not turn off, repeat steps 2-4 with the next code for your TV brand.
6. Once the TV is programmed, slide the mode switch back to the 'DIRECTV' position to control your receiver.

Figure 3: Top Section of the RC66RX Remote with Mode Switch

작동 지침

The DIRECTV RC66RX remote control features a comprehensive layout for easy navigation and control of your entertainment system.

Figure 4: Full Button Layout of the RC66RX Remote

주요 버튼 기능:

• TV INPUT: 텔레비전에서 사용 가능한 비디오 입력 소스를 순환하며 보여줍니다.
• PWR(전원): Turns the DirecTV receiver on or off.
• ON/OFF (&TV Power): Turns the programmed television on or off.
• 체재: 화면 비율을 변경합니다.
• 재생 제어(재생, 일시 정지, 정지, 되감기, 빨리 감기, 건너뛰기): Controls media playback on your DirecTV receiver.
• REC(기록): 현재 프로그램 녹화를 시작합니다.
• 가이드: 프로그램 가이드를 표시합니다.
• 활동적인: Accesses the DirecTV Active channel for interactive services.
• 목록: 녹화된 프로그램 목록을 표시합니다.
• 출구: 현재 메뉴 또는 화면을 종료합니다.
• 뒤: 이전 화면 또는 메뉴로 돌아갑니다.
• 메뉴: Accesses the main DirecTV menu.
• 정보: 현재 프로그램에 대한 정보를 표시합니다.
• SELECT (Center Button): 메뉴에서 선택한 내용을 확인합니다.
• 화살표 버튼: 메뉴와 채널을 탐색하세요.
• 볼륨(+/-): Adjusts the volume of the programmed television.
• 음소거: 텔레비전 소리를 음소거합니다.
• CHAN PAGE (Up/Down): Changes channels or pages through the guide.
• 이전 : 이전으로 돌아갑니다 view에드 채널.
• Number Pad (0-9, DASH, ENTER): 채널 번호를 직접 입력합니다.
• 색상 버튼(빨간색, 초록색, 노란색, 파란색): Used for special functions within certain menus or applications.

IR vs. RF Mode

The RC66RX remote supports both Infrared (IR) and Radio Frequency (RF) modes. IR mode requires a direct line of sight between the remote and the device being controlled. RF mode uses radio waves, allowing you to control your DirecTV receiver without pointing the remote directly at it, even if the receiver is in a cabinet or another room (within range). Ensure your DirecTV receiver is RF-compatible for this feature to work.

유지

배터리 교체

When the remote's performance degrades or it stops responding, it is likely time to replace the batteries. Follow the battery installation steps in the Setup section to replace the two AA batteries.

청소

리모컨을 청소할 때는 부드럽고 마른 천을 사용하세요. 잘 지워지지 않는 얼룩은 가볍게 닦아내세요.amp천에 물이나 순하고 연마성이 없는 세제를 묻혀 닦아주세요. 강한 화학 물질이나 과도한 습기는 리모컨의 전자 장치를 손상시킬 수 있으므로 사용하지 마세요.

문제 해결

• 리모컨이 응답하지 않음: Check if the batteries are correctly inserted and have sufficient charge. Replace batteries if necessary. Ensure the mode switch is set to the correct device (e.g., 'DIRECTV' for receiver functions).
• TV not responding to power/volume: Verify that the remote has been correctly programmed for your television using the IR programming steps. Ensure the mode switch is set to 'TV' when attempting to control TV functions.
• Buttons sticking or unresponsive: This may indicate dirt or debris under the buttons. Gently clean the remote as described in the Maintenance section. If the issue persists, the remote may need replacement.
• RF mode not working: Confirm your DirecTV receiver model is listed as RF compatible (R16, R22, H21, H22, H23, H24, HR21, HR22, HR23, HR24, HR34, C31). Ensure there are no major obstructions blocking the RF signal, although line-of-sight is not strictly required, extreme interference can affect performance.

명세서

보증 및 지원

For warranty information and customer support, please refer to the documentation provided with your purchase or contact SatelliteSale customer service directly. Keep your proof of purchase for any warranty claims.