Behringer P2 Ultra-Compact Personal In-Ear Monitor Ampliifier 사용 설명서

소개

The Behringer P2 Ultra-Compact Personal In-Ear Monitor Amplifier is designed for musicians who require personal monitoring in various performance and studio environments. This device provides convenient control over your in-ear monitor mix directly at your fingertips, offering a powerful, lightweight, and user-friendly solution.

제품 특징

• 초소형 디자인: Lightweight and portable, ideal for musicians on stage 또는 스튜디오에서.
• Personal Control: Allows musicians to control their monitor volume directly.
• Versatile Headphone Output: Features a standard 3.5 mm (1/8") stereo output jack for headphones, earbuds, or custom in-ear monitors.
• Secure Input Connector: XLR / TRS combo input connector with a locking mechanism to prevent accidental disconnections.
• 모노/스테레오 스위치: Internal switch to select between mono for mixer aux sends or stereo for headphone outputs.
• High-Quality Volume Control: Detented level control with an on/off switch for precise volume adjustment and long-term durability.
• 통합 벨트 클립: Convenient built-in belt clip for easy attachment to clothing or instrument straps.

설정

1. 배터리 설치

P2 amplifier operates on a 9V battery (not included). To install or replace the battery:

1. Locate the battery compartment release button on the side of the unit.
2. Press the button and slide the outer casing downwards to reveal the battery compartment.
3. 새로운 9V 배터리를 극성을 확인하여 삽입하십시오.
4. Slide the outer casing back into place until it clicks securely.

Image: The Behringer P2 with its outer casing removed, showing the internal battery compartment and the mono/stereo switch.

2. 오디오 소스에 연결하기

The P2 features a locking XLR / TRS combo input. This allows for connection to various audio sources such as a mixer's auxiliary send or a headphone output.

1. Connect your audio source (e.g., mixer output) to the XLR / TRS combo input at the bottom of the P2. The locking mechanism ensures a secure connection. To release, press the small tab next to the connector.
2. For stereo sources, use an XLR-to-TRS or TRS-to-TRS (male to male) cable.

Image: Close-up of the locking XLR / TRS combo input on the Behringer P2.

3. 헤드폰/이어폰 연결하기

Connect your headphones, earbuds, or in-ear monitors to the 3.5 mm (1/8") stereo output jack located at the top of the P2 unit.

이미지: 상단 view of the Behringer P2, highlighting the 3.5 mm headphone output jack.

작동 지침

1. 전원 켜기/끄기 및 볼륨 조절

The P2 features a combined power on/off switch and volume control knob.

1. To power on the unit, rotate the top-mounted volume knob clockwise until you hear a click. The battery indicator LED will illuminate.
2. 소리가 커지도록 시계 방향으로 계속 돌리세요.
3. 전원을 끄려면 손잡이를 시계 반대 방향으로 돌려서 딸깍 소리가 날 때까지 돌리세요.

Image: The top of the Behringer P2, showing the volume control knob and battery indicator light.

2. 모노/스테레오 모드 선택

An internal switch allows you to select between mono and stereo operation, depending on your audio source.

1. To access the switch, slide open the outer casing as described in the "Battery Installation" section.
2. Locate the small switch labeled "STEREO / MONO" inside the unit.
3. Set the switch to "MONO" if using a single mono source (e.g., a mixer's aux send).
4. Set the switch to "STEREO" if using a stereo source (e.g., a headphone output from a device).
5. Close the outer casing securely after making your selection.

3. 벨트 클립 사용하기

The integrated belt clip allows for convenient placement of the P2 during use.

• Attach the P2 to your waistband, belt, or instrument strap for easy access to volume control.

이미지: 측면 view of the Behringer P2, illustrating the integrated belt clip.

유지

• 청소: 부드럽고 마른 천을 사용하여 기기 외부를 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
• 배터리 관리 : Remove the 9V battery if the unit will not be used for an extended period to prevent leakage.
• 저장: P2은 직사광선과 극한 온도 변화를 피해 서늘하고 건조한 곳에 보관하십시오.

문제 해결

• 소리 없음:
  • Ensure the unit is powered on and the volume knob is turned up.
  • Check the battery indicator; replace the 9V battery if it's dim or off.
  • Verify all audio cables are securely connected to both the P2 and the audio source.
  • 오디오 소스가 활성화되어 신호를 보내고 있는지 확인하십시오.
  • Check the Mono/Stereo switch setting matches your audio source.
• 왜곡된 소리:
  • Reduce the volume on the P2 and/or the audio source.
  • Ensure the audio source signal is not too strong for the P2 input.
  • Check the audio cables for damage.
• 간헐적인 소리:
  • 모든 케이블 연결 부분이 느슨하지 않은지 확인하세요.
  • 배터리를 교체하세요.
  • Inspect cables for damage or wear.

명세서

공식 제품 영상

보증 및 지원

For warranty information, please refer to the official Behringer web대지: http://www.music-group.com/warranty.aspx

Manufacturer Contact Information: Behringer