샤프 SPC547

SHARP Digital Alarm Clock with 2 AMP High-Speed USB Charging Port User Manual

모델: SPC547

소개

구매해주셔서 감사합니다asing the SHARP Digital Alarm Clock with a 2 AMP High-Speed USB Charging Port. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your device. Please read these instructions thoroughly before use and keep them for future reference.

주요 특징

  • Digital Alarm Clock with Red LED Display
  • 2 AMP USB Rapid Charge Port for quick device charging
  • Adjustable Alarm Volume: High and Soft Low settings
  • Battery Backup for time and alarm settings during power outages
Sharp Digital Alarm Clock highlighting features like LED display, USB port, volume control, and battery backup.

이미지: 이상view of the Sharp Digital Alarm Clock, illustrating its main features including the large red LED display, 2 AMP USB charging port, alarm volume control, and the option for battery backup.

설정

1. 전원 연결

  1. Plug the AC power cord into a standard household electrical outlet.
  2. The display will flash, indicating it needs to be set.

2. 배터리 백업 설치

The battery backup feature maintains the time and alarm settings during a power outage. The display will not be lit during an outage, but the timekeeping and alarm function will resume once power is restored.

  1. Open the battery compartment located on the bottom of the clock.
  2. Insert two (2) AAA batteries (not included), ensuring correct polarity (+ and -).
  3. 배터리 덮개를 단단히 닫으세요.
Sharp Digital Alarm Clock with battery compartment visible on the underside.

Image: The underside of the Sharp Digital Alarm Clock, showing the battery compartment for backup power.

작동 지침

1. 시간 설정

  1. 를 누르고 계세요 시간 button. The time display will begin to flash.
  2. 를 잡고 있는 동안 시간 버튼을 누르세요 시간 시간을 조정하는 버튼을 사용하세요. 오후 시간대는 PM 표시를 확인하세요.
  3. 를 잡고 있는 동안 시간 버튼을 누르세요 버튼을 눌러 분을 조정합니다.
  4. 릴리스하다 시간 현재 시간을 저장하려면 버튼을 클릭하세요.

2. 알람 설정

  1. 를 누르고 계세요 경보 button. The alarm time display will begin to flash.
  2. 를 잡고 있는 동안 경보 버튼을 누르세요 시간 버튼을 눌러 알람 시간을 조정합니다.
  3. 를 잡고 있는 동안 경보 버튼을 누르세요 버튼을 눌러 알람 분을 조정하세요.
  4. 릴리스하다 경보 button to save the alarm time. The AL indicator will appear on the display.

3. 알람 사용

  1. 알람을 활성화하려면 슬라이드하세요. 알람 ON / OFF switch to the ON position. The AL indicator will be lit.
  2. 알람이 울리면 버튼을 누르세요. 선잠 button to temporarily silence it for 9 minutes. The alarm will sound again after the snooze period.
  3. 알람을 완전히 끄려면 슬라이드하세요. 알람 ON / OFF switch to the OFF position. The AL indicator will disappear.

4. 알람 소리 조절

를 누르세요 시끄러운 or 부드러운 buttons to select the desired alarm volume.

5. USB 충전 포트 사용

  1. Connect your USB device's charging cable to the 2 AMP USB port located on the front of the alarm clock.
  2. The clock provides 2000mA charging current, which is twice as fast as conventional 1000mA charging ports.
  3. 기기가 USB 충전과 호환되는지 확인하세요.
Sharp Digital Alarm Clock with a smartphone connected to its USB charging port.

Image: The Sharp Digital Alarm Clock with a smartphone plugged into its front-facing USB charging port, demonstrating its charging capability.

유지

  • Clean the clock with a soft, dry cloth. Do not use abrasive cleaners or chemical solutions.
  • If the clock will not be used for an extended period, remove the battery backup to prevent leakage.

문제 해결

문제해결책
Clock display is blank or flashing.Ensure the AC power cord is securely plugged into an outlet. If using battery backup, check if batteries are correctly installed and not depleted.
알람이 울리지 않습니다.Verify the ALARM ON/OFF switch is in the ON position. Check that the alarm time is correctly set.
USB 장치가 충전되지 않습니다.Ensure the USB cable is properly connected to both the clock and the device. Check if the device requires more than 2 AMPs or is incompatible with USB charging.
전원이 꺼진 후 시간이 잘못되었습니다.tage.Ensure fresh AAA batteries are installed for battery backup. The display will not illuminate during an outage, but the time should be maintained.

명세서

특징세부 사항
상표날카로운
모델 번호SPC547
색상Grey - Red LED
디스플레이 유형디지털
특징알람, 2 AMP USB 충전 포트
제품 치수폭 6.2인치 x 높이 2.3인치
전원배터리 전원, 유선 전기
필요한 배터리AAA 2개(포함되지 않음)
장착 유형테이블탑
다이얼 색상빨간색
제조업체날카로운
한국어:049353977485

보증 및 지원

제조업체 보증

This product is covered by a Manufacturer's Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the documentation included in your product packaging or contact Sharp customer service.

고객 지원

For technical assistance, troubleshooting, or any questions regarding your SHARP Digital Alarm Clock, please contact Sharp customer support. Contact information can typically be found on the manufacturer's web사이트 또는 제품 포장.

중요 안전 지침

감전, 화재 또는 부상을 방지하기 위해 모든 안전 지침을 읽고 준수하십시오.

  • 이 제품을 비나 습기에 노출시키지 마십시오.
  • 이 기기를 물 근처에서 사용하지 마십시오.
  • 마른 천으로만 닦으십시오.
  • 환기구를 막지 마십시오. 제조업체의 지침에 따라 설치하십시오.
  • 라디에이터, 난방 조절기, 스토브 또는 기타 장치(다음을 포함)와 같은 열원 근처에 설치하지 마십시오. amp열을 생성하는 발전기.
  • 극성 또는 접지형 플러그의 안전 목적을 저버리지 마십시오. 극성 플러그에는 두 개의 날이 있으며, 하나는 다른 하나보다 넓습니다. 접지형 플러그에는 두 개의 날과 세 번째 접지 갈래가 있습니다. 넓은 날 또는 세 번째 갈래는 안전을 위해 제공됩니다. 제공된 플러그가 콘센트에 맞지 않으면 전기 기술자에게 문의하여 오래된 콘센트를 교체하십시오.
  • 전원 코드가 밟히거나 끼지 않도록 보호하세요. 특히 플러그, 편의용 콘센트 및 기기에서 나오는 부분은 보호하세요.
  • 제조사가 지정한 부속품/액세서리만 사용하세요.
  • 번개 폭풍 시 또는 장기간 사용하지 않을 때는 기기의 플러그를 뽑아두세요.
  • 모든 서비스는 자격을 갖춘 서비스 담당자에게 의뢰하십시오. 전원 코드나 플러그가 손상되었거나, 액체가 쏟아졌거나, 물체가 기기에 떨어졌거나, 기기가 비나 습기에 노출되었거나, 정상적으로 작동하지 않거나, 떨어졌을 때와 같이 기기가 어떤 식으로든 손상된 경우 서비스가 필요합니다.
  • 주의 :이 서비스 지침은 자격을 갖춘 서비스 담당자 만 사용해야합니다. 감전 위험을 줄이려면 자격이없는 경우 작동 지침에 포함 된 것 이외의 서비스를 수행하지 마십시오.
  • 경고: 화재나 감전의 위험을 줄이려면 이 제품을 비나 습기에 노출시키지 마십시오.
  • WARNING: The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall not be placed on apparatus.
  • WARNING: The mains plug is used as the disconnect device; the disconnect device shall remain readily operable.
  • 경고: 배터리(배터리 팩 또는 설치된 배터리)는 햇빛, 불 등과 같은 과도한 열에 노출되지 않아야 합니다.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.