1. 제품 오버view
The FRANKE Active Window Pull-Out Kitchen Faucet, model 115.0486.978, is designed for modern kitchens, offering functionality and durability. This faucet features a ceramic cartridge, a non-return valve to prevent backflow, and a pull-out metal spout for enhanced flexibility. It is suitable for deck mounting with a single hole installation.
주요 특징:
- Ceramic cartridge for smooth operation and durability.
- Non-return valve to prevent water backflow from the extension spout.
- Movable metal spout with pull-out functionality.
- 800 mm connection hoses with 3/8" nut for easy installation.
- Mixer lever can be mounted on the left or right, with a 50/50 movement range.
- Water flow rate of 8.5 liters per minute (at 3 bar pressure).
Image 1: The FRANKE 115.0486.978 Active Window Pull-Out Kitchen Faucet, showcasing its chrome finish and pull-out spout design.
2. 설치 지침
Before beginning installation, ensure all necessary tools and components are available. It is recommended to have a qualified plumber perform the installation.
2.1 설치 전 점검 목록:
- Verify that the mounting surface is clean and flat.
- Confirm the mounting hole diameter is 35 mm.
- 수도 공급 라인이 차단되었는지 확인하십시오.
- 모든 구성품을 풀어서 손상이 있는지 확인하세요.
2.2 설치 단계:
- Insert the faucet body into the 35 mm mounting hole on the deck.
- From underneath the sink, secure the faucet using the provided mounting hardware. Ensure the faucet is stable and properly aligned.
- Connect the 800 mm hot and cold water supply hoses to the corresponding water lines. Use the 3/8" nuts to secure connections, ensuring they are hand-tightened first, then gently tightened with a wrench to prevent leaks.
- Connect the pull-out spray hose to the main faucet body and ensure the counterweight (if included) is properly installed on the hose for smooth retraction.
- The mixer lever can be positioned for left or right-hand operation. Adjust as desired before final tightening.
- Once all connections are secure, slowly turn on the water supply and check for any leaks.
Image 2: Technical drawing illustrating the dimensions and installation requirements for the FRANKE 115.0486.978 faucet, including spout height, reach, and mounting hole diameter.
3. 사용 설명서
The FRANKE 115.0486.978 faucet is designed for intuitive operation.
3.1 물 흐름 및 온도 제어:
- 레버 손잡이: 하나의 레버로 물의 흐름과 온도를 모두 조절할 수 있습니다.
- 흐름 조정: 레버 손잡이를 위로 올리면 물 흐름이 증가합니다. 아래로 누르면 물 흐름이 감소하거나 차단됩니다.
- 온도 조절: Move the lever handle to the left for hot water and to the right for cold water. The mixer lever has a 50/50 movement range for precise temperature control.
3.2 Pull-Out Spout Functionality:
- Grasp the end of the spout and gently pull it out from the main faucet body. The flexible hose allows for extended reach.
- After use, guide the spout back into its original position. The counterweight on the hose will assist in smooth retraction.
- The spout features a non-return valve to ensure water only flows in one direction, preventing contamination.
4. 유지관리 및 관리
Proper maintenance ensures the longevity and optimal performance of your FRANKE faucet.
4.1 Cleaning the Chrome Finish:
- 크롬 표면은 부드러운 천과 순한 비누 또는 크롬 마감재 전용으로 제작된 비연마성 세척제를 사용하여 정기적으로 닦아주십시오.
- 연마성 세제, 수세미 또는 독한 화학 물질(예: 암모니아, 표백제, 산성 세제)은 마감재를 손상시킬 수 있으므로 사용을 피하십시오.
- 세척 후에는 깨끗한 물로 깨끗이 헹구고 부드러운 천으로 말려 물 얼룩이 생기지 않도록 하세요.
4.2 Ceramic Cartridge Care:
- The ceramic cartridge is designed for long-lasting, drip-free performance. If you experience drips or difficulty in controlling water flow/temperature, the cartridge may need inspection or replacement.
- Contact a qualified plumber for cartridge replacement to ensure proper installation and avoid damage.
4.3 Aerator Cleaning:
- Periodically unscrew the aerator at the tip of the spout.
- Rinse any debris or mineral deposits from the aerator screen under running water. A soft brush can be used for stubborn deposits.
- 폭기기(에어레이터)를 다시 단단히 고정하십시오.
5. 문제 해결
일반적인 문제와 잠재적인 해결책은 다음 표를 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 낮은 물 흐름 |
|
|
| 주둥이에서 누수 |
|
|
| Difficulty with Pull-Out Spout Retraction |
|
|
If the problem persists after attempting these solutions, please contact FRANKE customer support or a qualified plumber.
6. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 프랭케 |
| 모델 번호 | 115.0486.978 |
| 모델명 | Active Window Pull-out |
| 제품 유형 | 주방 수도꼭지 |
| 색상 | 크롬 |
| 마무리 유형 | 크롬 |
| 재료 | 금속 |
| 장착 유형 | Deck Mounted, Single Hole |
| 핸들 수 | 1(레버) |
| 특징 | 당겨서 뿌리는 스프레이 |
| 최대 유량 | 8.5 Liters per minute (at 3 bar) |
| 주둥이 높이 | 174 밀리미터 |
| 주둥이 도달 | 231 밀리미터 |
| 장착 구멍 직경 | 35 밀리미터 |
| 연결 호스 길이 | 800 밀리미터 |
| 밸브 유형 | Disc Valve (Ceramic) |
7. 보증 및 지원
FRANKE products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official FRANKE web대지.
For technical assistance, spare parts, or warranty claims, please contact FRANKE customer service. Ensure you have your model number (115.0486.978) and proof of purchase available when contacting support.
제조업체: 프랭케