Sanus Premium Series Tilting TV Wall Mount

1. 서론

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Sanus Premium Series Tilting TV Wall Mount, model BLT2-B1. This mount is designed to securely hold most 42" to 90" flat-panel televisions, offering a tilting feature for optimal viewing angles. Please read all instructions carefully before beginning installation.

2. 안전 정보

경고: 이 지침을 읽고 따르지 않을 경우 심각한 부상, 재산 피해 또는 보증 무효화가 발생할 수 있습니다.

• 설치 표면이 마운트와 텔레비전의 총 무게를 안전하게 지탱할 수 있는지 확인하십시오.
• Always use a stud finder to locate the center of wall studs for secure mounting.
• Do not exceed the maximum weight capacity of the mount. Refer to the Specifications section for details.
• Professional installation is recommended for complex installations or if you are unsure about your wall structure.
• 모든 작은 부품과 포장재는 어린이의 손이 닿지 않는 곳에 보관하세요.

3. 패키지 내용

Verify that all components are present and undamaged before installation. The package typically includes:

• Wall plate assembly
• TV brackets (left and right)
• Mounting hardware kit (various screws, washers, spacers for TV and wall attachment)
• Installation template (may be included)

Image: The Sanus BLT2-B1 Tilting TV Wall Mount showing its main components including the wall plate and TV brackets.

4. 설정 및 설치

Follow these steps for a secure installation. It is recommended to have a second person assist during the installation process.

1. TV 준비: Attach the TV brackets to the back of your television using the appropriate screws and spacers from the hardware kit. Ensure the brackets are securely fastened and level.
2. 벽 스터드 찾기: Use a reliable stud finder to locate the center of two adjacent wall studs where you intend to mount the TV. Mark these locations precisely.
3. 벽 플레이트 위치: Hold the wall plate against the wall, aligning its mounting holes with the marked stud centers. Use a level to ensure the wall plate is perfectly horizontal. Mark the drill points.
4. 드릴 파일럿 홀: Drill pilot holes at the marked locations. The size of the drill bit will depend on the lag bolts provided; refer to the hardware instructions for exact specifications.
5. 벽면 플레이트 부착: Secure the wall plate to the wall using the lag bolts and washers. Tighten them firmly, but do not overtighten.
6. TV를 걸어 놓으세요: With assistance, carefully lift the television and hook the TV brackets onto the top edge of the installed wall plate. Gently lower the TV until the brackets engage with the wall plate.
7. TV를 안전하게 설치하세요: Locate the safety screws or locking mechanisms on the bottom of the TV brackets. Tighten these to secure the TV to the wall plate, preventing accidental dislodgement.

이미지: 측면 view of a television mounted on the wall, illustrating the space created by the mount for easy access to cables and ports.

5. 사용 설명서

The Sanus BLT2-B1 mount allows for easy tilting of your television to achieve the best view각도를 조절하고 눈부심을 줄이세요.

• TV 기울이기: Gently grasp the top or bottom edge of your television and push or pull to adjust the tilt angle. The mount is designed for smooth, friction-based tilting.
• 레벨링 조정: Some models may include a post-installation leveling feature. If your TV appears slightly unlevel after installation, consult the specific instructions provided with your hardware kit for minor rotational adjustments.
• 측면 이동: Once mounted, the TV can often be shifted horizontally along the wall plate to center it precisely. Gently slide the TV left or right as needed.

이미지: 측면 view of a television mounted on the wall, demonstrating the downward tilt capability of the mount.

Image: A diagram showing the range of motion for the TV mount, including vertical tilt and horizontal lateral shift capabilities.

6. 유지관리

정기적인 유지 관리는 TV 벽걸이 거치대의 수명 연장과 안전한 작동을 보장합니다.

• 정기 검사: Annually, inspect all mounting hardware and connections to ensure they remain tight and secure.
• 청소: 부드럽고 마른 천으로 마운트를 닦으십시오. 마감재를 손상시킬 수 있는 연마성 세척제나 용제 사용은 피하십시오.
• 매끄럽게 하기: The tilting mechanism is generally maintenance-free. Do not apply lubricants unless specifically instructed by Sanus support.

7. 문제 해결

If you encounter issues with your Sanus TV wall mount, consider the following:

• TV가 수평이 아닙니다: Check the wall plate installation for levelness. If your mount has a post-installation leveling feature, adjust it as per instructions.
• TV feels loose: Ensure all TV bracket screws and wall plate lag bolts are securely tightened. Verify the safety screws/locking mechanisms are engaged.
• 기울이기 어려움: Ensure no cables are obstructing the tilting mechanism. If the mount is new, the mechanism may require a few adjustments to loosen slightly.

For further assistance, contact Sanus customer support.

8. 사양

9. 보증 및 지원

Sanus products are designed for durability and reliability. For specific warranty information, please refer to the warranty card included with your product or visit the official Sanus website. For technical support, installation assistance, or to inquire about replacement parts, please contact Sanus customer service through their official channels.