BEPER 40.300

BEPER 40.300 Hair Clipper User Manual

Model: 40.300 | Brand: BEPER

1. 서론

This manual provides essential instructions for the safe and effective use of your BEPER 40.300 Hair Clipper. Please read all instructions carefully before operating the device and retain this manual for future reference. The BEPER 40.300 is a rechargeable hair clipper equipped with ceramic and titanium blades, designed for precise cutting and comfortable handling.

2. 안전 정보

  • 기기를 건조한 곳에 보관하세요. 물 근처나 습한 환경에서는 사용하지 마세요.
  • 제품을 물이나 다른 액체에 담그지 마십시오.
  • 어린이의 손이 닿지 않는 곳에 보관하세요.
  • 전원 어댑터가 해당 지역의 전원 공급 장치와 호환되는지 확인하세요.
  • 청소 또는 유지 보수 전에 제품의 플러그를 뽑으십시오.
  • Do not use if the blades are damaged or broken, as this may cause injury.
  • Only use original accessories provided by the manufacturer.

3. 패키지 내용

상자를 조심스럽게 풀고 모든 품목이 들어 있고 상태가 좋은지 확인하세요. 품목이 누락되었거나 손상된 경우 판매점에 문의하세요.

BEPER 40.300 Hair Clipper and accessories

Image: The BEPER 40.300 Hair Clipper shown with all included accessories.

  • BEPER 40.300 Hair Clipper
  • 충전 어댑터
  • 청소용 브러시
  • 윤활유 병
  • 4 Interchangeable Comb Attachments (3mm, 6mm, 9mm, 12mm)

4. 제품 오버view

Familiarize yourself with the main components of your hair clipper before use.

옆 view of BEPER 40.300 Hair Clipper

이미지: 측면 view of the BEPER 40.300 Hair Clipper, highlighting its ergonomic design.

  • Ceramic and Titanium Blades: For precise and efficient cutting.
  • Adjustable Rotary Ring: Allows for fine-tuning of cutting lengths from 0.8mm to 2mm.
  • 전원 스위치: 이발기를 켜고 끄는 방법입니다.
  • 충전 포트: 충전 어댑터를 연결합니다.
  • 인체공학적 손잡이: 편안한 그립감과 조작감을 위해 설계되었습니다.

5. 설정

5.1 클리퍼 충전

  1. 클리퍼가 꺼져 있는지 확인하세요.
  2. Connect the charging adapter to the charging port on the clipper.
  3. 어댑터를 적합한 전원 콘센트에 연결하십시오.
  4. Allow approximately 8 hours for a full charge. A fully charged clipper provides up to 60 minutes of continuous operation.
  5. 배터리를 과충전하지 마십시오. 충전이 완료되면 충전기를 분리하십시오.

5.2 빗 부착물 부착

The clipper comes with 4 comb attachments for different cutting lengths (3mm, 6mm, 9mm, 12mm).

  1. 클리퍼가 꺼져 있는지 확인하세요.
  2. Select the desired comb attachment.
  3. 빗 부착물을 이발기 헤드에 맞춰 끼우고 딸깍 소리가 나면서 제자리에 단단히 고정될 때까지 밀어 넣으세요.
  4. 제거하려면 빗살 부착물을 위쪽으로 살짝 밀어 올린 후 빼내십시오.

6. 사용 설명서

6.1 기본 작업

  1. Ensure the clipper is fully charged or connected to power if using corded.
  2. Select your desired cutting length using either the adjustable rotary ring or by attaching a comb guide.
  3. 전원 스위치를 눌러 클리퍼를 켜세요.
  4. Hold the clipper with the blades facing downwards and gently move it against the direction of hair growth.
  5. 최상의 결과를 얻으려면 깨끗하고 마른 모발에 사용하십시오.
  6. 사용 후에는 전원 스위치를 눌러 이발기를 끄십시오.

6.2 Adjusting Cutting Length (without comb attachment)

The rotary ring allows for precise adjustments of the blade length from 0.8mm to 2mm.

Close-up of the BEPER 40.300 Hair Clipper's adjustable rotary ring

Image: Detail of the adjustable rotary ring on the BEPER 40.300 Hair Clipper, showing length settings.

  • Rotate the ring located just below the blades to select your desired length: 0.8mm, 1.1mm, 1.4mm, 1.7mm, or 2mm.
  • Ensure the ring clicks into place at the chosen setting before use.

6.3 Using Comb Attachments

For longer cutting lengths, use the provided comb attachments (3mm, 6mm, 9mm, 12mm).

  • Attach the desired comb attachment as described in Section 5.2.
  • The rotary ring setting will be overridden by the comb attachment.
  • Move the clipper smoothly through the hair, ensuring the comb attachment remains flat against the scalp or skin.

7. 유지관리

Regular cleaning and maintenance will ensure optimal performance and extend the life of your hair clipper.

7.1 블레이드 청소

  1. Ensure the clipper is switched off and unplugged from the charger.
  2. Remove any attached comb guide.
  3. 제공된 청소 브러시를 사용하여 칼날과 클리퍼 헤드에서 떨어진 털을 제거하세요.
  4. For a more thorough clean, the blade set can be carefully detached (refer to specific instructions if provided with the product for blade removal). Rinse the detached blades under running water, ensuring the main body of the clipper does not get wet. Dry thoroughly before reattaching.
  5. 연마성 세척제나 용제를 사용하지 마십시오.

7.2 블레이드 오일링

To maintain cutting performance, lubricate the blades regularly.

  1. After cleaning, apply 1-2 drops of the provided lubricating oil to the blades.
  2. 오일이 골고루 퍼지도록 이발기를 몇 초간 작동시켜 주세요.
  3. 부드러운 천으로 여분의 기름을 닦아냅니다.

8. 문제 해결

If you encounter issues with your BEPER 40.300 Hair Clipper, refer to the following common problems and solutions:

문제가능한 원인해결책
클리퍼가 켜지지 않습니다.배터리가 방전되었습니다.클리퍼를 8시간 동안 충전하세요.
절단 성능이 좋지 않습니다.칼날이 더럽거나 기름칠이 되어 있지 않습니다.유지 보수 지침에 따라 날을 청소하고 기름칠하십시오.
이발기가 머리카락을 잡아당긴다.칼날이 둔하거나 더럽습니다.Clean and oil blades. If problem persists, blades may need replacement.
클리퍼가 이상한 소리를 낸다.칼날이 제대로 정렬되지 않았거나 윤활이 되어 있지 않습니다.Ensure blades are clean and oiled. Check for proper blade attachment.

이러한 해결 방법을 시도한 후에도 문제가 지속되면 고객 지원팀에 문의하세요.

9. 사양

  • 모델: 40.300
  • 상표: 베페르
  • 블레이드: 세라믹 및 티타늄
  • Adjustable Cutting Lengths (without comb): 0.8mm, 1.1mm, 1.4mm, 1.7mm, 2mm
  • 빗 부착물: 3mm, 6mm, 9mm, 12mm
  • 전원: 충전식 배터리 (C형 배터리 1개 포함)
  • 충전 시간: 약 8시간
  • 작동 시간: 최대 60분(완전 충전)
  • 재료: Ceramic (blades)
  • 치수: 27.6 x 20.8 x 6.2cm (패키지)
  • 무게: 600g (패키지)
  • ASIN: B076DC7MGS
  • GTIN: 08051772717940

10. 보증 및 지원

This product is covered by a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, spare parts, or any inquiries not covered in this manual, please contact BEPER customer service or your local retailer.

보증 청구를 위해 구매 증빙서류로 구매 영수증을 보관하세요.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.