PWR+ AC Adapter Instruction Manual for Booster PAC Jump Starters

1. 서론

This manual provides instructions for the safe and effective use of the PWR+ AC Adapter, model PWR-TAH19012N. This adapter is designed to provide power and charge compatible Booster PAC and CarStart jump starter models.

Image 1: The PWR+ AC Adapter with its integrated power cord.

2. 중요한 안전 정보

Read all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• UL 등재: This PWR+ AC Adapter is Tested, Approved, and Certified by UL/ULC (Underwriters Laboratories). The unique E475124 number is verifiable on the UL website, ensuring compliance with safety standards.
• 실내에서만 사용 가능: Use this adapter in dry, indoor environments only. Do not expose to rain or moisture.
• 적절한 환기: Ensure adequate ventilation around the adapter during use. Do not cover the adapter or place it in an enclosed space.
• 손상을 방지하세요: Do not use the adapter if the cord or plug is damaged. Do not attempt to open or repair the adapter.
• 내장된 보호 기능: The adapter features Short Circuit Protection (SCP), Over Current Protection (OCP), Over Voltage Protection (OVP), and Over Temperature Protection (OTP) for enhanced safety.

Image 2: UL certification logo and a visual comparison highlighting the safety certification of the PWR+ adapter.

3. 패키지 내용

패키지에는 다음 품목이 포함되어 있습니다.

• 1 x PWR+ AC Adapter (Model: PWR-TAH19012N)

Image 3: The PWR+ AC Adapter shown with its packaging.

4. 설정 지침

1. 어댑터를 검사합니다. Before first use, visually inspect the AC adapter and its cord for any signs of damage. Do not use if damaged.
2. 장치에 연결: Locate the charging port on your compatible Booster PAC or CarStart jump starter. Insert the barrel connector of the PWR+ AC Adapter firmly into the device's charging port.
3. 전원 콘센트에 연결: Plug the AC adapter's two-prong plug into a standard 110-240V wall outlet. Ensure the outlet is easily accessible.

The adapter features an extra-long 6.7 ft cord for flexible placement.

5. 사용 설명서

Once connected, the PWR+ AC Adapter will begin charging your Booster PAC or CarStart jump starter. The charging indicator on your jump starter will typically illuminate or change state to indicate charging status. Refer to your jump starter's manual for specific charging indicators.

• 충전 시간: Charging time varies depending on the jump starter model and its current battery level.
• 단절: Once your device is fully charged, disconnect the adapter from the wall outlet first, then from your jump starter.
• 연속 연결: While the adapter has built-in safety features, it is generally recommended to disconnect the charger once the device is fully charged to prolong battery life.

6. 호환성

This PWR+ AC Adapter is compatible with a wide range of Booster PAC and CarStart jump starter models, including but not limited to:

• Booster PAC ES6000, ES5000, ES5000C, ES2500, ES2500C, ES2500KE, ES1224
• Booster PAC J850, J900, J1000, J2000 Truck Pac Charger
• Booster PAC P/N: ESA214, ESA217, ESA218, ESA22, 141-003-000, 141-004-000, 141-337-000, DC1500500, GPU48180500WDOO, GPU481801000WD00
• CarStart CS1000, CS1200 Power Battery Booster
• Solar ES6000, ES6000KE, ES5000SOL, ES5000ESP5500, TCB-ESA217, ESA22, ES2500KE, ES2500SOL, ES2500KE, ESA217, ES5000ESP5500, J900-SOL, ESA-22, J850 Truck Pac Battery Booster Jump Starter

이미지 4: 전ample of a compatible device, the Booster PAC ES2500 jump starter.

7. 사양

이미지 5: 상세 view of the adapter's internal cable structure and built-in safety protections.

8. 문제 해결

• 장치가 충전되지 않음:
  • Ensure the adapter is securely plugged into both the jump starter and the wall outlet.
  • 다른 장치를 연결해 벽면 콘센트가 작동하는지 확인하세요.
  • Check if your jump starter model is listed in the compatibility section.
  • Inspect the adapter cord and connector for any visible damage.
• 어댑터 과열:
  • 어댑터는 통풍이 잘 되는 곳에 두고 덮지 마십시오.
  • 과열 현상이 지속되면 사용을 중단하고 고객 지원팀에 문의하세요.

9. 관리 및 유지 보수

• 청소: Disconnect the adapter from power before cleaning. Use a dry, soft cloth to wipe the adapter. Do not use liquid cleaners.
• 저장: Store the adapter in a cool, dry place away from direct sunlight and moisture when not in use. Avoid wrapping the cord too tightly around the adapter to prevent damage.
• 손질: 어댑터를 떨어뜨리거나 강한 충격을 주지 마십시오.

10. 보증 및 지원

This PWR+ AC Adapter comes with a 30일 환불 정책 그리고 24개월 교환 보증. PWR+ is a company based in Washington, USA, committed to customer satisfaction.

For warranty claims, technical support, or any inquiries, please contact PWR+ customer service through the retailer where the product was purchased or visit the official PWR+ web대지.