자동 미니 2단 머그컵 열전사 프레스기 사용 설명서

1. 서론

This manual provides essential instructions for the safe and efficient operation of your Automatic Mini Double Station Mug Heat Press Transfer Machine. Please read this manual thoroughly before use to ensure proper setup, operation, and maintenance.

This machine is designed for sublimation printing on various mug sizes, featuring a double station design for increased efficiency.

2. 안전 지침

• 기계는 항상 안정적이고 내열성이 있는 표면에서 작동하십시오.
• Keep hands clear of heating elements during operation to prevent burns.
• 작업 공간의 적절한 환기를 보장하십시오.
• Do not expose the machine to water or excessive moisture.
• 사용하지 않을 때나 청소/유지관리를 하기 전에는 기기의 플러그를 콘센트에서 뽑아 두세요.
• Do not attempt to modify or repair the machine yourself. Contact qualified personnel for service.
• 작동 중인 기계에 어린이와 애완동물이 접근하지 못하도록 하십시오.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• 1x Double Mug Heat Press Machine
• 영문 사용자 설명서 1부 (본 문서)
• 2x 11oz Heating Pads (pre-installed or included separately)

품목이 누락되었거나 손상된 경우 고객 지원팀에 문의하세요.

4. 설정

1. 짐 풀기: Carefully remove the heat press machine from its packaging. Retain packaging for future storage or transport.
2. 놓기: Place the machine on a flat, stable, and heat-resistant surface. Ensure there is adequate space around the machine for ventilation and safe operation.
3. 전원 연결: Ensure the machine's power switch is in the OFF position. Plug the machine into a standard 110V AC power outlet.
4. 초기 검사: Before first use, inspect the heating pads and control panel for any visible damage.

그림 1: 전면 view of the Double Mug Heat Press Machine. This image shows the overall design with two mug stations and the central control panel.

5. 사용 설명서

5.1 제어판 이상view

Figure 2: Close-up of the LCD control panel. The panel features an LCD display for temperature and time, along with buttons for timing, temperature adjustment, and mode selection for left and right stations.

The machine features an LCD control panel for setting temperature and time. It allows for independent control of each mug station.

5.2 기본 작업 단계

1. 전원 켜기: 메인 전원 스위치를 켜세요. LCD 디스플레이에 불이 들어옵니다.
2. 설정 온도: Use the temperature adjustment buttons (often indicated by '+' and '-' or specific temperature setting buttons) to set the desired transfer temperature. The recommended transfer temperature is 180°C (356°F).
3. 시간 설정: Use the timing adjustment buttons to set the desired transfer time. The recommended transfer time is 90 seconds.
4. 예열 : Allow the machine to preheat until it reaches the set temperature. The display will show the current temperature.
5. 머그컵을 준비하세요: Wrap your sublimation print around the mug, securing it with heat-resistant tape. Ensure the print is flat against the mug surface.
6. Insert Mug: Carefully place the prepared mug into the heating pad of one or both stations. Ensure the mug is centered and the heating pad fully encompasses the printed area.
7. 압력을 가하세요: cl을 닫으세요amp handle to apply even pressure to the mug. The machine is designed to accommodate various mug sizes (6OZ, 9OZ, 11OZ, 12OZ, 17OZ) with appropriate heating pads.
8. 전송 시작: Press the start button (often labeled 'Timing' or 'Start') for the respective station. The timer will begin counting down.
9. Remove Mug: Once the timer reaches zero, carefully open the clamp handle and remove the hot mug using heat-resistant gloves.
10. 쿨다운: Place the mug on a heat-resistant surface to cool. Once cool, carefully remove the sublimation paper.

Figure 3: A mug correctly positioned within the heating element of the heat press machine, ready for the sublimation process.

5.3 Workflow Diagram

Figure 4: A visual representation of the sublimation printing process, from designing and printing the image to pressing it onto the mug and the final result.

5.4 Replacing Heating Pads

The heating pads are replaceable to accommodate different mug sizes. The machine includes two 11oz heating pads. For other sizes, contact customer support.

그림 5: 자세한 view of the heating element, showing its construction and how it secures the mug for heat transfer.

1. 전원 끄기 및 플러그 뽑기: Ensure the machine is turned off and unplugged from the power source. Allow the heating pads to cool completely.
2. 고정 장치를 느슨하게 하세요: Locate the fasteners securing the heating pad to the machine frame. Loosen or remove them as required.
3. Disconnect Pad: Carefully disconnect the electrical connector for the heating pad.
4. 오래된 패드 제거: Slide out the old heating pad.
5. 새로운 패드 설치: Insert the new heating pad, ensuring it is correctly aligned.
6. 연결 및 보안: Reconnect the electrical connector and secure the heating pad with the fasteners.
7. 시험: Plug in the machine and perform a test run to ensure the new heating pad functions correctly.

6. 유지관리

• 청소: After each use, ensure the machine is cool and unplugged. Wipe down the exterior surfaces with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• 온열 패드 관리 방법: Inspect heating pads regularly for wear or damage. Replace if necessary to ensure consistent heat transfer.
• 저장: 사용하지 않을 때는 건조하고 먼지가 없는 환경에 기기를 보관하십시오.

7. 문제 해결

8. 사양

9. 보증 및 지원

No specific warranty information is provided with this product. For technical support, replacement parts (such as different sized heating pads), or any operational questions, please refer to the seller or manufacturer's contact information provided at the point of purchase.