1. 서론
구매해주셔서 감사합니다asing the Soundsation GO-SOUND 10A Active Speaker System. This manual provides essential information for the safe and efficient operation of your new active speakers. Please read it thoroughly before use and retain it for future reference.
The GO-SOUND 10A is a versatile active speaker system featuring a 10-inch woofer, designed for various applications including karaoke, DJ sets, public address (PA) systems, gym sound, and live music performances. Its portable design and robust construction ensure reliable performance.
그림 1: 앞면과 측면 view of the Soundsation GO-SOUND 10A Active Speaker System, showcasing its portable design and protective grille.
2. 안전 정보
경고: 화재나 감전의 위험을 줄이려면 이 기기를 비나 습기에 노출시키지 마십시오.
주의: 감전의 위험이 있습니다. 열지 마.
이 기호는 절연되지 않은 위험 전압이 있음을 나타냅니다.tage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
This symbol indicates that important operating and maintenance instructions are included in the literature accompanying this product.
- 전원: 지정된 용량의 AC 전원 콘센트에만 기기를 연결하십시오.tage (230V 50Hz). Ensure the power cord is not damaged or pinched.
- 통풍: 환기구를 막지 마십시오. 제조업체의 지침에 따라 설치하십시오.
- 열: 라디에이터, 난방 조절기, 스토브 또는 기타 장치(다음을 포함)와 같은 열원 근처에 설치하지 마십시오. amp열을 생성하는 발전기.
- 물과 습기: Do not use this apparatus near water. Do not expose to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus.
- 청소: 마른 천으로만 닦으십시오.
- 서비스: 이 제품을 직접 수리하려고 하지 마십시오. 모든 수리는 자격을 갖춘 서비스 담당자에게 맡기십시오. 전원 코드나 플러그가 손상된 경우, 액체를 쏟았거나 이물질이 기기 안으로 들어간 경우, 기기가 비나 습기에 노출된 경우, 정상적으로 작동하지 않는 경우 또는 기기를 떨어뜨린 경우 등 기기가 어떤 식으로든 손상된 경우에는 수리가 필요합니다.
3. 설정
3.1 풀기
Carefully unpack your GO-SOUND 10A speaker system. Inspect the unit for any signs of damage that may have occurred during transit. If damage is found, contact your dealer immediately.
3.2 배치
The GO-SOUND 10A is designed as a portable speaker and can be placed on a shelf, stand, or any stable, flat surface. Ensure adequate ventilation around the unit to prevent overheating.
3.3 연결
Refer to the rear panel diagram for all input and output connections.
그림 2: 상세 view of the rear panel of the Soundsation GO-SOUND 10A, showing all input, output, and control elements.
- MIC/LINE IN (VOL 1): This input accepts both XLR and 1/4" Jack connectors. Use it for microphones or line-level audio sources. Adjust its volume with the 제 1 권 손잡이.
- LINE IN (VOL 2): This input accepts RCA (L/R) and XLR connectors. Use it for line-level audio sources such as mixers, media players, or instruments. Adjust its volume with the 제 2 권 손잡이.
- 믹스 아웃: An XLR output that provides a mixed signal of all inputs. Use this to connect to another active speaker or an external amp리퍼.
- EQ(고음/저음): These knobs allow you to adjust the treble (HIGH) and bass (LOW) frequencies of the overall sound output.
- 전원 LED : 장치의 전원이 켜지면 켜집니다.
- 클립 LED: Illuminates when the input signal is too strong, indicating potential distortion. Reduce the input volume if this LED lights up frequently.
- AC 입력: Connect the provided power cable here. Ensure the voltage matches your local power supply (230V 50Hz). The fuse rating is T1.0A/250V.
- 전원 스위치: 장치를 켜거나 끕니다.
4. 사용 설명서
4.1 전원 켜기/끄기
- Ensure all volume knobs (VOL 1, VOL 2) are set to their minimum position before powering on.
- Connect the power cable to the AC INPUT and then to a suitable power outlet.
- 뒤집다 힘 switch to the 'ON' position. The 전원 LED 밝아질 것이다.
- To power off, set all volume knobs to minimum, then flip the 힘 switch to 'OFF'.
4.2 Adjusting Volume and EQ
점차적으로 증가시키다 제 1 권 그리고/또는 제 2 권 knobs to achieve the desired sound level. Use the 높은 그리고 낮은 EQ knobs to fine-tune the treble and bass frequencies to suit your preference or the acoustics of the room. If the 클립 LED flashes frequently, reduce the input volume from your source or the corresponding VOL knob to prevent distortion.
4.3 스테레오 페어링
The GO-SOUND 10A supports stereo pairing. To achieve a stereo setup, you will need two GO-SOUND 10A units. Connect the MIX OUT of one speaker to the LINE IN (XLR) of the second speaker. Ensure your audio source is connected to the first speaker. This configuration allows for a wider and more immersive sound experience.
4.4 권장 사용법
This active speaker system is suitable for a variety of applications:
- 노래방: Connect microphones and music sources for vocal performances.
- DJ 세트: Ideal for small to medium-sized events, providing clear and powerful sound.
- Pubs & Gyms: Excellent for background music or announcements.
- Live Music: Can be used as a main PA speaker or a monitor for small bands and solo artists.
5. 유지관리
5.1 청소
To clean the speaker cabinet, use a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents as they may damage the finish. Ensure the unit is unplugged from the power source before cleaning.
5.2 보관
장기간 사용하지 않을 경우, 스피커를 직사광선과 극한 온도 변화를 피해 서늘하고 건조한 곳에 보관하십시오. 보관 및 운송 시에는 원래 포장재를 보관하는 것이 좋습니다.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| No power, POWER LED is off. | Power cable not connected or faulty. Power switch is off. No power from outlet. | Check power cable connection. Ensure power switch is ON. Test outlet with another device. Check fuse (T1.0A/250V). |
| 소리가 출력되지 않습니다. | Volume knobs are at minimum. Input source not connected or faulty. Cables are incorrect or damaged. | Increase VOL 1/VOL 2. Check input source and its volume. Verify all audio cables are correctly connected and functional. |
| Distorted sound, CLIP LED flashes. | Input signal is too high. | Reduce the volume from your audio source or the corresponding VOL knob on the speaker until the CLIP LED no longer flashes frequently. |
| 윙윙거리는 소리 또는 웅웅거리는 소리. | Ground loop issue. Faulty cables. Interference from other electronic devices. | Ensure all equipment is on the same power circuit. Try different cables. Move speaker away from other electronic devices. |
7. 사양
- 상표: 사운드세이션
- 모델 이름: GO-SOUND 10A
- 스피커 유형: Active, Portable
- 우퍼 직경: 10인치
- 최대 출력 전력: 480와트
- 연결 기술 : RCA, XLR, 1/4" Jack
- 오디오 출력 모드: 스테레오 재생
- 특징: 스테레오 페어링
- 추천 용도: Karaoke, DJ, Pub, Gyms, Live Music
- 호환 장치: Home theater system, Projector, Television
- 전원 공급 장치: Wired (AC 230V 50Hz)
- 퓨즈 등급 : T1.0A/250V
- 무게: 22550 Grams (approx. 22.55 kg)
8. 보증 및 지원
8.1 제한 보증
This Soundsation GO-SOUND 10A speaker system comes with a limited warranty. Please refer to the warranty card included with your purchase or contact your local dealer for specific terms and conditions. The warranty typically covers manufacturing defects under normal use.
8.2 고객 지원
For technical assistance, service, or any questions regarding your Soundsation GO-SOUND 10A, please contact your authorized Soundsation dealer or visit the official Soundsation website for support resources. Please have your product model and purchase information ready when contacting support.
