1. 제품 오버view
The Unocho 24V 5A Automatic Smart Battery Charger is designed for efficient and safe charging of 24V AGM, GEL, SLA, and other lead-acid batteries. It features a 3-pin XLR connector, an I/O switch, and multiple safety protections, making it suitable for various applications including wheelchairs, mobility scooters, cars, and boats.
주요 특징:
- 빠르고 효율적인 충전: Provides 5A constant current output, compatible with 7Ah–120Ah lead-acid batteries, and supports AC100-240V input for global use.
- 안전하고 신뢰할 수 있음: Designed to UL/CE/CCC safety standards with an intelligent 4-step charging program (Initialization, Bulk Charge, Absorption, Float Mode) and ultra-low standby power consumption.
- 독특한 디자인: Features a high-density aluminum casing, I/O switch, 4-speed fan for heat dissipation, IP65 waterproof rating, and LED indicators for power and charging progress.
- 다중 안전 보호: Includes protections against short circuit, overvoltage, overcurrent, overload, and reverse polarity.
- 광범위한 적용 범위: Suitable for SLA / VRLA / Flooded (Wet) / Calcium type deep cycle / GEL / AGM lead-acid batteries used in wheelchairs, electric carts, vehicles, motorcycles, and trucks.
2. 설정 지침
Follow these steps to properly set up your Unocho 24V 5A Automatic Smart Battery Charger:
- 충전기 풀기: Carefully remove the charger and all accessories from the packaging. Inspect for any visible damage.
- 환기를 보장하십시오: Place the charger in a well-ventilated area, away from flammable or explosive materials. Ensure adequate space around the charger for heat dissipation.
- 배터리에 연결: Connect the 3-pin XLR output connector of the charger to the corresponding port on your 24V battery or device. Ensure a secure connection.
Image 2.1: Diagram illustrating the 3-pin XLR connector, showing Pin-1 as positive, Pin-2 as negative, and Pin-3 as empty. This ensures correct polarity connection. - 전원 콘센트에 연결: Plug the AC input cable into the charger's AC inlet, then plug the other end into a standard AC100-240V power outlet.
Image 2.2: The charger's AC input interface and the standard power plug for connecting to a wall outlet. - 전원 켜기: Flip the I/O switch on the charger to the "ON" position. The red power indicator light should illuminate.
중요한: Always connect the charger to the battery first before plugging it into the AC power outlet. Disconnect from AC power before disconnecting from the battery.
3. 사용 설명서
The Unocho Smart Battery Charger features an intelligent 4-stage charging process and clear LED indicators to monitor charging status.
충전 프로세스:
- 초기화: The charger analyzes the battery's condition.
- 대량 청구 : Delivers maximum current to rapidly charge the battery up to approximately 80% capacity.
- 흡수 모드: Charges at a decreasing current to bring the battery to 100% capacity.
- 플로트 모드: Maintains the battery at full charge with a small, constant voltage, preventing overcharging and extending battery life.
LED 표시등:
- Red LED (Power): Indicates the charger is connected to AC power and is turned on.
- Green LEDs (Charging Progress): Four green LEDs indicate the battery capacity from 25% to 100% during charging.
Image 3.1: Close-up of the charger's LED display, showing the red power indicator and the four green lights that illuminate sequentially to show charging progress. - All Green LEDs Flashing: Indicates battery polarity is reversed or the output is shorted. Disconnect immediately and check connections.
- All Green LEDs Off (Red LED On): No battery is connected, or the battery is severely discharged.
- One Green LED On (and other 3 Off, Red LED On): The charger has entered the recovery desulfating process for deeply discharged batteries.
4. 유지관리
- 청소: Disconnect the charger from both the AC outlet and the battery before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use harsh chemicals or abrasive cleaners.
- 저장: 사용하지 않을 때는 충전기를 서늘하고 건조한 곳에 보관하세요. 극한의 온도와 직사광선을 피하세요.
- 케이블 검사: Regularly inspect the AC power cord and the 3-pin XLR output cable for any signs of damage, fraying, or exposed wires. Replace if damaged.
- 통풍: Ensure the charger's fan and vents are free from dust and debris to maintain optimal cooling performance. The internal fan automatically adjusts speed based on power load to reduce noise and heat.
5. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Charger not turning on (No red power LED) |
|
|
| Green LEDs flashing (not charging) |
|
|
| Charger not charging (Red LED on, all Green LEDs off) |
|
|
| 충전기가 과열됩니다 |
|
|
6. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | Unocho |
| 모델 번호 | 3-pin XLR (EPA150-24) |
| 입력 Voltage | 교류 100-240V, 50/60Hz |
| 출력 볼륨tage | 24볼트(DC) |
| 출력 전류 | 5 Amps |
| 호환 배터리 유형 | SLA / VRLA / Flooded (Wet) / Calcium type deep cycle / GEL / AGM lead-acid batteries |
| 배터리 용량 범위 | 7아 – 120아 |
| 충전 중 Stages | 4-stage (Initialization, Bulk Charge, Absorption, Float) |
| 커넥터 유형 | 3핀 XLR 수 |
| 안전 보호 | 단락, 오버볼륨tage, overcurrent, overload, reverse polarity |
| 방수 등급 | IP65 |
| 냉각 | Internal fan with 4-speed gears |
| 제품 치수 | 2.56 x 6.42 x 3.74 인치 |
| 품목 무게 | 1.41 온스 |
7. 보증 및 지원
The Unocho 24V battery trickle charger comes with worry-free return and exchange services. For any questions or issues, please contact customer support. They offer 24-hour customer support to assist with any concerns regarding your Unocho battery charger.
For further assistance, please refer to the official Unocho store or contact their customer service directly.