소개
The Solus SPC-320 Dusk-to-Dawn Photocell Sensor is designed to automate the operation of your outdoor lighting. This sensor detects ambient light levels, automatically turning your light fixture on at dusk and off at dawn, providing convenience and energy efficiency. It features an Ezee Change Plug for simplified replacement and is suitable for 3-inch lamp 게시물.
안전 정보
- 설치 또는 정비 작업을 하기 전에 항상 회로 차단기에서 전원을 차단하십시오.
- 설치는 자격을 갖춘 전기 기술자가 수행하거나 해당 지역의 전기 규정에 따라 수행해야 합니다.
- 모든 전선 연결이 안전하고 적절하게 절연되어 있는지 확인하세요.
- Do not immerse the photocell sensor in water.
- 볼륨을 확인하세요tage와 왓tage ratings of your fixture are compatible with the sensor.
포함된 부품
- Photocell Photo Control Light Sensor
- Light Shield (optional)
- 장착 나사
- 와이어 너트
명세서
| 사양 | 값 |
|---|---|
| 모델 | SPC-320 |
| 작동 모드 | Automatic (Dusk-to-Dawn) |
| 운영 볼륨tage | 120 볼트 |
| Max Incandescent Wattage | 300와트 |
| 최대 LED 와트tage | 60와트 |
| Max Fluorescent Wattage | 39와트 |
| Max HID Wattage | 100와트 |
| 장착 유형 | Post Mount (for 3" lamp posts with 1.375" diameter mounting hole) |
| 커넥터 유형 | Plug-In (Ezee Change Plug) |
| 인증 | UL 인증 |
| 재료 | 플라스틱, 구리, 황동 |
설치 지침
This sensor is designed for easy installation into 3-inch lamp posts with a 1.375-inch diameter mounting hole. The Ezee Change Plug simplifies future replacements.
- 전원 분리: Before beginning any installation, ensure power to the lamp 해당 콘센트는 회로 차단기에서 전원이 차단되었습니다.
- 장착 위치 준비: If replacing an existing sensor, carefully remove the old unit. Ensure the mounting hole in the lamp post is approximately 1.375 inches (1 3/8 inches) in diameter.
- 와이어 연결: The sensor comes with an Ezee Change Plug and a wiring harness. If your existing setup does not have this plug, you will need to hardwire the harness first. Refer to the wiring diagram below for correct connections. Use the provided wire nuts to secure connections.
- 연결하다 빨간선 from the photo-control to the black wire of the light fixture.
- 연결하다 블랙 와이어 from the photo-control to the black (supply) wire.
- 연결하다 all white wires together (neutral).
- 연결하다 green or bare wires together (지면).
- 센서 연결: Once the harness is wired, plug the photocell sensor into the Ezee Change Plug connector.
- 마운트 센서: Insert the sensor into the mounting hole on the lamp post. Secure it using the provided mounting screws. Ensure the sensor face is unobstructed and points towards an open sky area for optimal light detection.
- Optional Light Shield: If the sensor is exposed to direct artificial light sources at night (e.g., streetlights, porch lights) that might interfere with its operation, install the optional light shield to prevent premature turn-off.
- 복원력 : 설치가 완료되고 모든 연결이 안전한 경우 회로 차단기에서 전원을 복구하세요.
배선도
작업
Once installed and powered, the Solus SPC-320 Photocell Sensor will operate automatically. The built-in photocell detects the absence of sufficient natural light at dusk and activates the connected light fixture. Conversely, at dawn, when sufficient natural light is detected, the sensor will deactivate the light fixture. No manual intervention is required.
The sensor is compatible with various lighting types, including incandescent (up to 300W), LED (up to 60W), fluorescent (up to 39W), and HID (up to 100W) fixtures, making it versatile for residential and commercial applications.
유지
The Solus SPC-320 Photocell Sensor requires minimal maintenance. Periodically inspect the sensor's face to ensure it is clean and free from dirt, debris, or obstructions that could interfere with light detection. Gently wipe the sensor with a soft, damp cloth if cleaning is necessary. Do not use abrasive cleaners.
보증
The Solus SPC-320 Dusk-to-Dawn Photocell Sensor is backed by a 5-year warranty, providing peace of mind regarding its quality and durability.
