Enjoybot Bluetooth Beanie BB001-GY User Manual

소개

This manual provides detailed instructions for the safe and effective use of your Enjoybot Bluetooth Beanie. Please read this guide thoroughly before operating the device and retain it for future reference.

제품 특징

• Fashion & Tech Combine: Super soft Acrylic and Polyester knit beanie, keeps your head warm while allowing hands-free listening and calls via Bluetooth.
• Newest Bluetooth Technology: Equipped with high-efficiency Bluetooth wireless technology for easy and fast pairing with Bluetooth-enabled devices such as smartphones, tablets, and digital media players. Wireless range up to 33 feet (10 meters).
• Ultra-long Talking & Music Time: Built-in rechargeable Li-Ion battery provides up to 6 hours of playtime and 60 hours of standby time with only 1.5 hours of charging.
• Simple Button Operation: User-friendly control panel with built-in wireless stereo speaker and microphone for convenient control of music playback (skip tracks, adjust volume) and call handling (answer, hang up) without needing to access your phone.
• Easily Washable & Practical: Easy to wash after removing the built-in Bluetooth module. Suitable for various occasions including outdoor activities, car travel, beach, park, office, and home.

이미지: 이상view of Enjoybot Bluetooth Beanie features.

설정

비니 충전하기

Before first use, fully charge the Enjoybot Bluetooth Beanie. Connect the Micro USB charge cable to the charging port on the beanie and to a USB power source. The indicator light will show charging status. Charging time is approximately 1.5 hours.

Image: Enjoybot Bluetooth Beanie charging via Micro USB.

Bluetooth 장치와 페어링

1. Ensure the beanie is charged and turned off.
2. Press and hold the 'Play' button for 5 seconds until the red and blue lights flash alternatively. This indicates pairing mode.
3. 기기(스마트폰, 태블릿 등)에서 블루투스를 활성화하고 사용 가능한 기기를 검색하세요.
4. Select 'Enjoybot' from the list of devices. Once connected, the indicator light will show a steady blue light or flash slowly.

Image: Control panel with indicator light and buttons for pairing.

작동 지침

전원 켜기/끄기

• To power on, press and hold the 'Play' button until the indicator light turns on.
• To power off, press and hold the 'Play' button until the indicator light turns off.

음악 재생

• Press the 'Play' button to play or pause music.
• Press the '+' button to increase volume or skip to the next song.
• Press the '-' button to decrease volume or go to the previous song.

통화 처리

• When a call comes in, the beanie will ring.
• Press the 'Play' button to answer an incoming call.
• Press the 'Play' button again to end a call.
• Press and hold the 'Play' button to reject an incoming call.

Image: Users demonstrating music and call functions with the Enjoybot Bluetooth Beanie.

유지

세탁 지침

1. Before washing, you 해야 하다 remove the control panel and speakers from the beanie.
2. Carefully detach the electronic components from their pockets inside the beanie.
3. Hand wash the beanie only.
4. Allow the beanie to air dry completely before reinserting the electronic components.

Image: Enjoybot Bluetooth Beanie in water, illustrating removable components for washing.

문제 해결

페어링할 수 없음

• Ensure the beanie is charged and in pairing mode (red and blue lights flashing alternatively).
• Make sure Bluetooth is enabled on your device and it is within 33 feet (10 meters) of the beanie.
• Try restarting both the beanie and your Bluetooth device.

소리가 나지 않습니다

• Check the volume levels on both the beanie and your connected device.
• Ensure the beanie is properly paired and connected to your device.

짧은 배터리 수명

• Ensure the beanie is fully charged before use (1.5 hours charging time).
• 배터리 수명은 음량 수준 및 사용량에 따라 달라질 수 있습니다.

명세서

보증 및 지원

Enjoybot provides a 1-year warranty for this Bluetooth Beanie, covering defects in materials and workmanship under normal use. For support or warranty claims, please contact Enjoybot customer service.