TPLTECH E365821 3-Prong Power Cord Instruction Manual

1. 제품 오버view

The TPLTECH E365821 is a high-quality, UL Certified 3-prong power cord designed to provide reliable power to compatible electronic devices. This 6-foot, 18 AWG cable is suitable for use with specific models of gaming consoles and other electronics requiring a standard 3-pin power connection.

주요 특징:

• 호환성: Specifically designed for Sony PlayStation PS3 First Generation (Fat) and Xbox 360 1st Generation (Fat).
• 전원 사양: 3-Prong, 18 AWG, 125V 10A.
• 안전 인증: Tested, Approved, and Certified by UL for safety and quality.
• 길이: 6 feet (approximately 1.8 meters) for convenient placement.

Image 1.1: The TPLTECH 3-Prong Power Cord, showing both the male plug and the female connector.

2. 호환성

This power cord is engineered for specific devices that utilize a standard 3-pin power input. Verify your device's power input port matches the female connector of this cable.

호환되는 기기는 다음과 같습니다.

• Sony PlayStation PS3 First Generation (Fat models only)
• Xbox 360 1st Generation (Fat models only)
• Other devices requiring a 3-pin, 18 AWG, 125V 10A power cord (e.g., some TVs, speakers, computers).

Image 2.1: Visual representation of the 3-pin female connector and examples of compatible devices such as the original PS3 (Fat model), speakers, TVs, and PCs.

3. 설정 지침

Follow these steps to correctly connect your TPLTECH power cord to your device and power source.

1. 코드 검사: Before connecting, visually inspect the power cord for any signs of damage, such as cuts, frayed wires, or bent prongs. Do not use a damaged cord.
2. 포트 식별: Locate the power input port on your compatible device (e.g., PS3 Fat, Xbox 360 Fat). This port should be a 3-pin receptacle.
3. 장치에 연결: Align the female end of the TPLTECH power cord with the power input port on your device. Gently push the connector firmly into the port until it is fully seated. Do not force the connection.
4. 전원 콘센트에 연결: Insert the male plug of the power cord into a standard, grounded 3-prong electrical wall outlet. Ensure the outlet is easily accessible.
5. 전원 켜기: Once both ends are securely connected, you may power on your device according to its manufacturer's instructions.

4. 사용 설명서

The TPLTECH power cord operates by providing electrical current from a wall outlet to your compatible device. No specific operational steps are required for the cord itself beyond proper connection.

• Ensure the power cord is not kinked, pinched, or placed under heavy objects during use.
• Avoid unplugging the cord by pulling on the cable itself; always grasp the plug firmly.
• Do not use the power cord in wet conditions or near water.

5. 유지관리

Proper care and maintenance will extend the life of your power cord and ensure safe operation.

• 청소: Disconnect the power cord from both the device and the wall outlet before cleaning. Wipe the cord with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
• 저장: When not in use, coil the power cord loosely. Avoid tight coiling or bending at sharp angles, which can damage the internal wires. Store in a cool, dry place away from direct sunlight and extreme temperatures.
• 점검: Periodically inspect the cord for any signs of wear, damage, or discoloration. Pay close attention to the areas near the plugs, which are reinforced to withstand stress.

Image 5.1: The power cord features reinforced stress points at the connectors to enhance durability and prevent wear.

Image 5.2: The power cord coiled for storage, demonstrating proper handling to prevent damage.

6. 문제 해결

If you encounter issues with your device not receiving power, consider the following troubleshooting steps:

• 장치에 전원이 공급되지 않음:
  • Ensure both ends of the power cord are securely plugged into the device and the wall outlet.
  • Verify that the wall outlet is functional by testing it with another known working appliance.
  • Check your home's circuit breaker or fuse box to ensure the circuit has not tripped.
  • Inspect the power cord for any visible damage. If damaged, discontinue use and replace the cord.
• 간헐적인 힘:
  • Ensure connections are tight and stable. Loose connections can cause intermittent power.
  • Avoid placing the cord where it can be easily disturbed or pulled.

If problems persist after following these steps, consult the user manual for your specific device or contact TPLTECH customer support.

7. 사양

Image 7.1: Detail of the power cord indicating its 18 AWG (American Wire Gauge) specification.

8. 안전 정보

Your TPLTECH power cord is UL Listed, indicating it meets rigorous safety standards. Adhere to the following safety guidelines to prevent electrical hazards and ensure safe operation:

• Use only with devices that match the cord's voltage and current ratings (125V 10A).
• 전기 콘센트에 과부하를 걸지 마세요.
• Never use the cord if it is damaged, frayed, or has exposed wires.
• Keep the cord away from heat sources, sharp edges, and moving parts.
• Do not run the cord under carpets, rugs, or furniture, as this can cause overheating or damage.
• Ensure children and pets cannot tamper with the cord or connected device.
• Unplug the cord from the wall outlet when not in use for extended periods.

Image 8.1: The UL Listed certification mark, confirming the product meets recognized safety standards.

9. 보증 및 지원

For warranty information or technical support regarding your TPLTECH power cord, please refer to the manufacturer's official web사이트에서 확인하거나 고객 서비스에 직접 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.

제조업체: 티피엘텍