Tenda PH5 AV1000 Powerline Kit User Manual

1. 서론

The Tenda PH5 AV1000 Powerline Kit provides a high-speed network solution using your home's existing electrical wiring. This kit includes a Powerline Adapter (P3) and a Wi-Fi Powerline Extender (PA6), designed to eliminate Wi-Fi dead zones and extend your network coverage with speeds up to 1000 Mbps via powerline and 300 Mbps via Wi-Fi.

This manual provides instructions for setting up, operating, and maintaining your Tenda PH5 AV1000 Powerline Kit.

2. 패키지 내용

시작하기 전에 패키지에 다음 품목이 포함되어 있는지 확인하세요.

• 1x Tenda PH5 AV1000 Powerline Adapter (P3)
• 1x Tenda PH5 AV1000 Wi-Fi Powerline Extender (PA6)
• 1x 이더넷 케이블
• 1x Quick Installation Guide (this manual)

Image: Tenda PH5 AV1000 Powerline Kit showing both the wall-plugged adapter and the extender unit.

3. 설정 지침

Follow these steps to set up your Tenda PH5 AV1000 Powerline Kit:

3.1. 초기 연결

1. Connect the Powerline Adapter (P3): Plug the P3 adapter into a wall outlet near your internet router. Do not use a power strip or extension cord, as this can degrade performance.
2. 라우터에 연결: Use the provided Ethernet cable to connect the P3 adapter to an available LAN port on your internet router.
3. Plug in the Wi-Fi Powerline Extender (PA6): Plug the PA6 extender into a wall outlet in the room where you need extended network coverage. Ensure it is also plugged directly into a wall outlet.
4. 지표를 기다리세요: Wait for the Powerline LED (house icon) on both devices to turn solid green, indicating a successful powerline connection. The Wi-Fi LED (Wi-Fi icon) on the PA6 should also turn solid green.

3.2. Wi-Fi Cloning (Optional)

The Wi-Fi cloning feature allows the PA6 extender to automatically copy your router's Wi-Fi name (SSID) and password, creating a seamless roaming network.

1. 라우터에서 WPS를 누르세요: Within two minutes of plugging in the PA6, press the WPS button on your main Wi-Fi router.
2. Press Wi-Fi Button on PA6: Immediately after pressing WPS on the router, press the Wi-Fi button on the PA6 extender.
3. Wait for Cloning: The Wi-Fi LED on the PA6 will flash during the cloning process and turn solid green once successful. Your PA6 will now broadcast a Wi-Fi network with the same name and password as your router.

메모: If your router does not have a WPS button, or if Wi-Fi cloning fails, you can manually configure the Wi-Fi settings via the Tenda web interface (refer to the Operating section).

4. 사용 설명서

4.1. 장치 연결

• 유선 연결: The PA6 extender features two Gigabit Ethernet ports. You can connect devices such as Smart TVs, gaming consoles, or PCs directly to these ports using an Ethernet cable for a stable, high-speed wired connection.
• 무선 연결: Connect your Wi-Fi enabled devices (smartphones, tablets, laptops) to the Wi-Fi network broadcast by the PA6 extender. If you used Wi-Fi cloning, the network name and password will be the same as your main router. Otherwise, refer to the default Wi-Fi details provided on the device label or configure them manually.

4.2. LED 표시기

The LED indicators provide information about the device status:

• 전원 LED(전원 아이콘):
  • 녹색 점등: 기기의 전원이 켜져 있습니다.
  • 꺼짐: 기기의 전원이 꺼져 있습니다.
• 전력선 LED (집 모양 아이콘):
  • Solid Green: Good powerline connection.
  • Solid Red: Weak powerline connection.
  • Off: No powerline connection.
• Wi-Fi LED (Wi-Fi icon - PA6 only):
  • Solid Green: Wi-Fi is active.
  • Flashing Green: Wi-Fi cloning in progress.
  • 끄기: Wi-Fi가 비활성화됩니다.

팁: If the Powerline LED on the PA6 is red, try plugging it into a different wall outlet to find a stronger connection point.

4.3. Web 관리 인터페이스

고급 설정 및 구성을 위해서는 다음 링크를 참조하십시오. web management interface of the PA6 extender:

1. Connect your computer to the PA6 extender either wirelessly or via an Ethernet cable.
2. 열기 web browser and enter the default IP address (usually printed on the device label or found in the Quick Installation Guide).
3. 기본 사용자 이름과 비밀번호(기기 라벨에도 표시되어 있음)를 사용하여 로그인하십시오.
4. From here, you can change Wi-Fi settings, set Wi-Fi schedules, manage connected devices, and update firmware.

5. 유지관리

• 청소: 기기를 닦을 때는 부드럽고 마른 천을 사용하십시오. 액체 또는 에어로졸 세척제는 사용하지 마십시오.
• 놓기: Ensure the devices are placed in well-ventilated areas to prevent overheating. Avoid placing them near heat sources or in direct sunlight.
• 펌웨어 업데이트: Tenda 담당자를 주기적으로 확인하세요. website for firmware updates. Keeping your device's firmware up-to-date ensures optimal performance and security.
• 전원 콘센트: Always plug the powerline devices directly into a wall outlet. Avoid power strips, surge protectors, and extension cords, as they can interfere with powerline signal transmission.

6. 문제 해결

6.1. No Powerline Connection (Powerline LED Off)

• Ensure both the P3 adapter and PA6 extender are plugged directly into wall outlets.
• Verify that the P3 adapter is connected to your router via an Ethernet cable.
• Try plugging both devices into outlets within the same electrical circuit. Powerline communication works best within the same circuit.
• If the issue persists, try resetting both devices to factory defaults (refer to the device's quick installation guide for reset instructions).

6.2. Slow Powerline Speed (Powerline LED Red)

• Relocate the PA6 extender to a different wall outlet. The signal quality can vary between outlets.
• Ensure no high-power electrical appliances (e.g., washing machines, refrigerators) are plugged into adjacent outlets or on the same circuit, as they can cause interference.
• Avoid using power strips or extension cords.

6.3. Wi-Fi Not Working on PA6

• Check if the Wi-Fi LED on the PA6 is solid green. If not, press the Wi-Fi button on the PA6 to enable Wi-Fi.
• If Wi-Fi cloning failed, access the web management interface to manually configure the Wi-Fi settings (SSID and password).
• Ensure the PA6 has a stable powerline connection (Powerline LED solid green).

7. 사양

8. 보증 및 지원

보증: This Tenda PH5 AV1000 Powerline Kit comes with a 2-year manufacturer's warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

기술 지원: For technical assistance, troubleshooting, or further inquiries, please visit the official Tenda website or contact their customer support. Contact information can typically be found on the Tenda web판매처 또는 원래 포장 상태로 보관하십시오.

온라인 리소스: For the latest drivers, firmware updates, and additional support documentation, please visit: www.tendacn.com