1. 제품 오버view
The Beam Electronics DGC2020 Car Phone Holder Mount is designed to securely hold your smartphone in your vehicle. It features a quick-release button for easy phone removal and a 360-degree rotating head for optimal viewing angles. This mount is compatible with a wide range of smartphones and electronic devices.
주요 특징:
- 퀵 릴리스 버튼: Press the button on the back to open the arms and retrieve your mobile phone. Press the arms together to clamp 휴대전화를 안전하게 보관하세요.
- 360도 회전: The fully 360-degree rotation provides the best viewing angle for navigation, calls, or music.
- 광범위한 호환성: Fits most cellphones and electronic devices with a width from 1.9 inches to 3.7 inches.
- Single-handed Operation: Designed for simple installation and removal of smartphones with no tools required.
Image 1.1: The Beam Electronics Car Phone Holder Mount securely installed in a vehicle's air vent, displaying a smartphone.
2. 설정 및 설치
Follow these steps to properly install your car phone holder mount:
- Identify Compatible Air Vent: The mount is designed for horizontal or vertical air vents. Ensure your vehicle's vent type is compatible.
- 마운트 부착: Locate the clip mechanism on the back of the phone holder. Push the clip firmly onto one of the air vent blades.
- 클립을 고정하세요: On the back of the clip, there is a lever or knob to tighten the grip. Adjust it to ensure the mount is securely fastened to the vent and does not wobble.
이미지 2.1: 폭발 view highlighting key components: adjustable side-grip arms, 360-degree rotatable pivot, quick-release button, and the cushioned air vent clip.
Image 2.2: Visual guide for compatible and incompatible car air vent designs for secure mounting.
Video 2.1: Demonstrates installation tips for the car phone holder mount in various car models, showing how to attach it to the air vent and adjust for optimal positioning.
3. 사용 설명서
휴대폰 삽입하기:
- Gently pull open the adjustable side-grip support arms of the holder.
- Place your smartphone into the holder, ensuring it rests on the bottom support feet.
- Press the adjustable arms inward until they securely grip your phone. The arms will lock into place, holding your device firmly.
휴대폰 제거:
- Locate the quick-release button on the back of the holder (refer to Image 2.1).
- Press the quick-release button. The side-grip arms will automatically slide open.
- Carefully remove your smartphone from the holder.
Image 3.1: A finger demonstrating the quick-release button on the back of the mount, which expands the arms for phone removal.
조정 View각도:
The phone holder features a 360-degree rotatable pivot. Simply rotate the phone holder to achieve your desired vertical or horizontal viewing angle. Ensure the angle is adjusted before driving to avoid distraction.
Video 3.1: Shows the phone holder's adjustable side grips and 360-degree rotation, demonstrating how it securely holds various phone sizes and allows for flexible view각도를 나타냅니다.
Video 3.2: Illustrates the ease of use for the Beam Electronics car phone holder, including phone insertion, removal, and rotation, highlighting its sturdy grip.
4. 관리 및 유지 보수
- 청소: 홀더를 부드러운 천으로 닦아주세요.amp 먼지와 이물질을 제거하는 데 천을 사용하십시오. 독한 화학 약품이나 연마성 세척제 사용은 피하십시오.
- 점검: Periodically check the air vent clip and phone gripping arms for any signs of wear or damage. Ensure all moving parts operate smoothly.
- 온도: While the product is designed to be heat and cold resistant, extreme temperatures can affect its longevity. Avoid prolonged exposure to direct sunlight or extreme cold when not in use.
5. 문제 해결
- Mount feels loose on the vent: Ensure the tightening lever/knob on the back of the clip is fully engaged and tightened. Re-adjust if necessary.
- 휴대전화가 안전하게 고정되어 있지 않습니다. Make sure the side-grip arms are fully closed around your phone. The holder is compatible with devices between 1.9 and 3.7 inches in width.
- Difficulty with quick-release button: Ensure the button is pressed firmly and completely. If it still sticks, check for any obstructions or debris.
6. 제품 사양
| 특징 | 사양 |
|---|---|
| 제품 치수 | 2.72 x 3.39 x 5.51 인치 |
| 품목 무게 | 0.071 온스 |
| 품목 모델 번호 | DGC2020 |
| 특별 기능 | Adjustable, Cold Resistant, Heat Resistant, Rotatable |
| 색상 | 회색, 검정색 |
| 호환 장치 | 스마트폰 |
| 호환되는 전화 모델 | iPhone 12, 11 Pro Max, XS, XR, X, 8+, 7+, SE, 6s, 6+, 5s, 4; Samsung Galaxy S6, HTC, LG, Nexus, Nokia (width 1.9 to 3.7 inches) |
| 장착 유형 | 벤트 |
7. 보증 및 지원
This Beam Electronics Car Phone Holder Mount comes with a 1년 보증 구매일로부터. 본 보증은 제조상의 결함에 대한 보증이며, 정상적인 사용 환경에서 제품이 의도한 대로 작동하는지 확인합니다.
For warranty claims, technical support, or any inquiries regarding your product, please contact Beam Electronics customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and product model number (DGC2020) ready when contacting support.