Stagg SLI-ECOPAR186-1 Flat LED Spotlight Instruction Manual

1. 서론

This manual provides comprehensive instructions for the safe and effective operation of your Stagg SLI-ECOPAR186-1 Flat LED Spotlight. This professional lighting fixture is designed for various applications, offering versatile and powerful illumination for stages, events, and venues.

2. 제품 특징

• 빔 각도: 25 Degree beam angle for focused light projection.
• LED 구성: Equipped with 186 x 0.1 Watt LED Bulbs.
• 전력 소비량: Efficient 15 Watt power consumption.
• 제어 프로토콜 : Supports DMX-512 Protocol with selectable 4 or 8 channels.
• 작동 모드: Features DIMMER (0-100%), Strobe, Auto, Sound Control, and Master/Slave functions.
• 설치: Includes 2 brackets for flexible hanging or floor placement.
• 용법: 실내에서만 사용하도록 설계되었습니다.
• 연결성: Utilizes 3-Pin DMX and IEC input and outputs.

3. 패키지 내용

모든 품목이 들어 있는지 확인하려면 패키지 내용물을 확인하세요.

• 1 x Stagg SLI-ECOPAR186-1 Flat LED Spotlight
• 1 x 전원 케이블
• 2 x 마운팅 브래킷
• 1 x 사용자 설명서

4. 안전 지침

안전한 작동을 보장하고 손상을 방지하려면 다음 안전 예방 조치를 준수하세요.

• 기기를 작동하기 전에 모든 지침을 꼼꼼히 읽으십시오.
• 기기를 물, 습기, 습도가 높은 환경에서 멀리 두세요.
• 과열을 방지하기 위해 조명기구 주변에 적절한 환기를 확보하세요.
• c를 열지 마세요asin기기를 직접 수리하려고 시도하지 마십시오. 모든 서비스는 자격을 갖춘 전문가에게 맡기십시오.
• This product is designed for indoor use only. Do not expose to rain or extreme temperatures.
• 청소나 유지관리를 하기 전에는 반드시 전원을 차단하세요.

5. 설정

5.1 장착

The SLI-ECOPAR186-1 is equipped with two adjustable brackets, allowing for flexible installation. The fixture can be securely hung from a truss system or placed stably on a flat surface. Always ensure the fixture is firmly secured to prevent accidental falls.

5.2 연결

Connect the provided IEC power cable to the fixture's power input and then to a suitable electrical outlet. For DMX control, connect standard 3-pin DMX cables from your DMX controller to the fixture's DMX input. To daisy-chain multiple units, connect the DMX output of the first fixture to the DMX input of the next.

Image: The Stagg SLI-ECOPAR186-1 Flat LED Spotlight, featuring a circular array of numerous small, multi-colored LED bulbs. The fixture is black with two adjustable mounting brackets, designed for versatile positioning.

6. 작동 모드

Stagg SLI-ECOPAR186-1 offers several operating modes to suit various lighting needs:

• DMX-512 Protocol: Allows for precise control over light functions using an external DMX controller. The fixture can be set to 4 or 8 DMX channels. Refer to the DMX chart (typically found in the full product manual) for specific channel assignments and values.
• Dimmer (0-100%): Adjusts the overall brightness of the light output from completely off to full intensity.
• 스트로브 : Activates a rapid flashing effect, with adjustable speed.
• 자동 모드 : The fixture cycles through a series of pre-programmed light shows automatically, providing dynamic lighting without external control.
• 사운드 제어 모드: An integrated microphone allows the light to react to ambient sound or music, synchronizing light changes with audio beats.
• 마스터/슬레이브 기능: Connect multiple SLI-ECOPAR186-1 units together for synchronized operation. Set one unit as the 'Master' and the others as 'Slave' units. The slave units will mimic the master's behavior.

7. 유지관리

Regular maintenance ensures the longevity and optimal performance of your LED spotlight:

• 청소: Periodically clean the lens and the exterior casing with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as they may damage the finish or optical components.
• 사이: Routinely check all power and DMX cable connections to ensure they are secure and free from damage.
• 저장: When not in use for extended periods, store the fixture in a cool, dry place, away from direct sunlight and extreme temperatures.

8. 문제 해결

S에 문제가 발생하면tagg SLI-ECOPAR186-1, refer to the following common problems and solutions:

• 전원 없음:
  • Ensure the power cable is securely connected to both the fixture and a working electrical outlet.
  • Verify that the power switch on the fixture is in the 'ON' position.
• 빛 출력 없음:
  • Check the selected operating mode (e.g., DMX, Auto, Sound).
  • If in DMX mode, ensure a valid DMX signal is being received and the DMX address is correctly set.
  • Confirm the dimmer setting is not at 0%.
• Incorrect Operation / Unresponsive:
  • Temporarily disconnect and reconnect the power to reset the unit.
  • If using DMX, double-check your DMX channel settings and ensure there are no conflicts with other devices.

9. 사양

10. 보증 및 지원

For detailed warranty information, technical support, or service inquiries regarding your Stagg SLI-ECOPAR186-1 Flat LED Spotlight, please contact Stagg customer service directly or visit the official Stagg web사이트. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.