Amazon Basics 중등받이 사무용 컴퓨터 책상 의자 (모델 GF-9390M-1) 사용 설명서

소개

This manual provides essential instructions for the assembly, operation, and maintenance of your Amazon Basics Mid-Back Office Computer Task Desk Chair. Please read all instructions carefully before assembly and use to ensure proper function and safety.

안전 정보

경고:

• Always follow the assembly instructions provided in this user manual to ensure safe use.
• 최대 중량 용량인 275파운드(124.74kg)를 초과하지 마십시오.
• Be cautious of the swivel feature to prevent tripping.
• Ensure all screws are fully tightened before use. Periodically check and re-tighten all fasteners.

패키지 내용

조립을 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

• 좌석 쿠션
• 백쿠션
• Gas Lift (Cylinder)
• Hardware (Screws, Hex Tool)
• 받침대 (5각별 모양 받침대)
• 팔걸이(2)
• 캐스터 (5)
• Mechanism (for seat height and tilt)

설정 및 조립

Follow these steps to assemble your office chair. An assembly video is provided for visual guidance.

1. Insert Casters: Firmly press each of the five casters (wheels) into the holes at the end of each leg of the 5-point star base. Ensure they are securely seated.
2. 삽입 실린더: Place the gas lift cylinder into the center hole of the assembled base. Ensure the narrower end of the cylinder points upwards.
3. 좌석에 메커니즘 부착: Align the seat mechanism with the pre-drilled holes on the underside of the seat cushion. Use the provided screws (typically 'A' type) and the hex tool to attach it. Do not fully tighten yet.
4. Place Seat on Cylinder: Carefully place the assembled seat (with mechanism attached) onto the gas lift cylinder. The cylinder should fit snugly into the mechanism's central opening.
5. 팔걸이 부착: Position the armrests on either side of the seat, aligning them with the pre-drilled holes on both the seat and the backrest. Use the appropriate screws (typically 'B' type) to attach them. Do not fully tighten these screws at this stage.
6. 등받이 부착: Align the backrest with the armrests and the seat. Use the remaining screws (typically 'C' type) to secure the backrest to the armrests.
7. 모든 나사를 조이세요: Once all components are loosely assembled, fully tighten all screws using the hex tool. Ensure all connections are firm and secure.
8. Place Screw Caps: Cover any visible screw heads with the provided plastic caps for a finished appearance.

작동 지침

Your Amazon Basics office chair offers several adjustable features for personalized comfort:

• 좌석 높이 조정: To raise the seat, lift the lever located under the seat while taking your weight off the chair. To lower the seat, lift the lever while remaining seated. Release the lever at the desired height.
• 틸트 기능: The chair features a tilt mechanism. To enable tilting, pull the lever outwards. To lock the chair in an upright position, push the lever inwards.
• 틸트 장력 조정: Rotate the round knob located under the seat (usually at the front of the mechanism) to adjust the tension of the tilt. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).
• 360도 회전: The chair is designed with a 360-degree swivel for easy movement and multi-tasking.
• Rolling Casters: The five-point base with casters allows for smooth-rolling mobility across various floor surfaces.

유지

To maintain the appearance and longevity of your chair:

• 청소: 광고로 깨끗이 닦아내세요amp 천으로 닦아주세요. 인조 가죽을 손상시킬 수 있는 강한 화학 약품이나 연마성 세척제는 사용하지 마세요.
• 패스너: 주기적으로 모든 나사와 볼트가 단단히 조여져 있는지 확인하십시오. 흔들림이나 불안정성을 방지하기 위해 필요에 따라 다시 조이십시오.
• 캐스터 : 바퀴가 원활하게 굴러가도록 바퀴에 이물질(머리카락, 먼지 등)이 묻지 않도록 하세요.

문제 해결

의자에 문제가 발생하면 다음 사항을 고려하십시오.

• 의자가 불안정하거나 흔들립니다. Ensure all assembly screws are fully tightened. Check the gas lift cylinder for proper seating in the base and mechanism.
• Difficulty leaning back or adjusting tilt: Check the tilt tension knob under the seat. Rotate it counter-clockwise to loosen the tension. Ensure the tilt lock lever is disengaged (pulled outwards).
• Screws not fitting or stripping: Ensure you are using the correct screws for each step as indicated in the assembly instructions. Do not overtighten screws during initial assembly; tighten fully only after all components are loosely fitted. If a screw is stripped, contact customer support for replacement parts.
• 캐스터가 원활하게 굴러가지 않음: Inspect casters for trapped debris (hair, lint) and clean them. Ensure they are fully inserted into the base.

명세서

보증 및 지원

For warranty information or technical support, please refer to the product packaging or contact Amazon Basics customer service directly. Keep your purchase receipt for any warranty claims.