1. 제품 오버view
The Total Control WM1411 TV wall mount is designed for secure and stable mounting of television units ranging from 32 to 55 inches. This mount is compatible with various VESA sizes, specifically from 200 x 100 mm up to 400 x 400 mm, ensuring broad compatibility with many TV models. Its slim design allows for a minimal distance of only 19 mm from the wall, providing a sleek, low-profile appearance. All necessary mounting hardware is included for a straightforward installation process.
주요 특징:
- Display Size Compatibility: Suitable for all TV sets from 32 to 55 inches.
- 간편한 설치: All installation materials, including screws, wall plugs, and spacers, are provided in the product packaging for simple and easy setup.
- VESA 호환성: Supports VESA sizes from 200 x 100 mm to 400 x 400 mm. VESA is a standard that specifies the distance between the mounting holes on the back of your TV.
- 슬림 프로file: Mounts TV only 19 mm from the wall.
- 내구성 있는 구조: Made from alloy steel or aluminum for robust support.

2. 안전 정보
Please read all instructions carefully before installation. Incorrect installation may result in property damage, serious injury, or death. If you do not understand these instructions, or have doubts about the safety of the installation, please contact a qualified installer.
- 설치 표면이 마운트와 디스플레이의 총 무게를 안전하게 지탱할 수 있는지 확인하십시오.
- 마운트의 최대 중량 용량을 초과하지 마십시오.
- Use appropriate tools and follow all drilling and mounting instructions precisely.
- Always use a stud finder to locate wooden studs for secure mounting. If mounting to concrete or brick, use appropriate anchors.
- 설치하는 동안 어린이와 애완동물이 접근하지 못하도록 하세요.
- Periodically check the mount for any signs of wear or loose connections.
3. 패키지 내용
설치를 시작하기 전에 모든 구성품이 있고 손상되지 않았는지 확인하십시오. 부품이 누락되었거나 손상된 경우 설치를 중단하고 고객 지원 센터에 문의하십시오.
- Wall Plate (Main Bracket)
- TV 브래킷 (2개)
- Mounting Hardware Kit (includes various screws, wall anchors, washers, and spacers for TV and wall attachment)

4. 설정 및 설치
4.1. 시작하기 전에
- TV의 VESA 패턴을 확인하세요: Locate the four mounting holes on the back of your TV and measure the horizontal and vertical distance between them. This mount supports VESA patterns from 200x100mm to 400x400mm.
- 벽 유형을 확인하세요: Identify if your wall is made of wood studs, concrete, or brick. This will determine the type of anchors and drilling required.
- 도구 모으기: You will need a drill, stud finder (for wood walls), level, pencil, measuring tape, and a screwdriver.
4.2. 단계별 설치
- TV 브래킷을 TV에 부착하세요: Carefully place your TV face down on a soft, clean surface. Align the two vertical TV brackets with the mounting holes on the back of your TV. Use the appropriate screws and spacers from the hardware kit to secure the brackets. Ensure the brackets are centered and level.
- Mark Wall Drilling Locations: Hold the wall plate against the wall at your desired TV height. Use a level to ensure it is perfectly horizontal. Mark the drilling points through the holes on the wall plate with a pencil. For wood stud walls, use a stud finder to locate the center of the studs and align the wall plate holes with them.
- 드릴 파일럿 홀: Drill pilot holes at the marked locations. The drill bit size will depend on your wall type and the anchors being used (refer to the hardware kit instructions).
- Install Wall Anchors (if applicable): If mounting to concrete or brick, insert the appropriate wall anchors into the drilled holes. Tap them gently with a hammer until they are flush with the wall surface.
- 안전한 벽면 플레이트: Align the wall plate with the drilled holes and secure it to the wall using the provided screws and washers. Tighten all screws firmly but do not overtighten.
- 벽면 마운트 플레이트에 TV를 고정하세요: With assistance, carefully lift the TV (with the attached TV brackets) and hook the TV brackets onto the wall plate. Ensure the TV brackets are securely seated on the wall plate.
- 벽면 플레이트에 TV 고정: Locate the safety screws or locking mechanisms on the bottom of the TV brackets. Tighten these screws to secure the TV to the wall plate, preventing accidental dislodgement.
5. 사용 설명서
The Total Control WM1411 is a fixed TV wall mount, meaning it does not offer tilt, swivel, or extension capabilities. Once installed, its operation is minimal.
- 안전한 착용감: Ensure the TV is securely locked onto the wall plate using the safety screws.
- 케이블 관리 : Organize and route your TV cables neatly behind the TV or along the wall for a clean appearance.
6. 유지관리
정기적인 유지 관리는 TV 벽걸이 마운트의 수명과 안전성을 보장하는 데 도움이 됩니다.
- 청소: 거치대를 주기적으로 부드럽고 마른 천으로 닦아주세요. 연마성 세척제나 용제 사용은 피해주세요.
- 연결 확인: Every 6-12 months, visually inspect all screws and connections to ensure they remain tight and secure. Retighten any loose screws.
- 구조적 무결성: Check for any signs of damage, corrosion, or deformation on the mount or the wall. If any issues are found, consult a professional.
7. 문제 해결
설치 중 또는 설치 후 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.
- TV가 수평이 아닙니다: Ensure the wall plate was installed perfectly level. If not, carefully adjust the wall plate or use shims if minor adjustments are needed. Re-check with a level.
- 산이 불안정하다고 느껴집니다: Double-check that all wall screws are securely tightened and that the correct wall anchors were used for your wall type. Ensure the TV is properly seated and locked onto the wall plate.
- 잃어버린 부분들: Refer to the 'Package Contents' section. If parts are missing, do not proceed with installation. Contact Total Control customer support for replacement parts.
- TV가 마운트에 맞지 않습니다: Verify your TV's VESA pattern matches the mount's supported range (200x100mm to 400x400mm). Also, ensure your TV's screen size is within the 32-55 inch range.
8. 사양
| 사양 | 세부 사항 |
|---|---|
| 상표 | 전체 제어 |
| 모델 | WM1411 |
| 호환 장치 | TV |
| 최소 화면 크기 | 32인치 |
| 최대 화면 크기 | 55인치 |
| VESA 호환성 | 200x100mm ~ 400x400mm |
| 장착 유형 | Wall Mount (Fixed) |
| 벽과의 거리 | 19mm (XNUMXmm) |
| 재료 | Alloy Steel or Aluminum |
| 제품 치수 | 46.5 x 19.5 x 42.2cm |
| 품목 무게 | 930g |
9. 보증 및 지원
For information regarding warranty coverage for your Total Control WM1411 TV wall mount, please refer to the documentation included with your purchase or visit the official Total Control web사이트. 보증 조건은 일반적으로 구매일로부터 특정 기간 동안 제조상의 결함에 대한 보증을 제공합니다.
If you require technical assistance, have questions about installation, or need to report a missing/damaged part, please contact Total Control customer support. Contact details can usually be found on the product packaging or the manufacturer's official web대지.