MakerFocus 8541549166
MakerFocus TP4056 Charging Module User Manual
모델: 8541549166
소개
The MakerFocus TP4056 Charging Module is a compact and efficient solution designed for charging 18650 lithium batteries. It features a Micro USB input, allowing for convenient charging using standard mobile phone chargers. This module also includes essential battery protection features, ensuring safe and reliable operation for various DIY projects.
주요 특징은 다음과 같습니다.
- Micro USB input for direct charging with phone chargers.
- Integrated battery protection against over-discharge and overcurrent.
- Convenient input voltage wiring pads for flexible DIY integration.
- Visual charging status indicator (red for charging, green for full).
Image: A pack of ten MakerFocus TP4056 Charging Modules, showcasing their compact size and Micro USB port.
설정
Setting up the TP4056 charging module involves connecting the power input, the lithium battery, and any desired load. Follow these steps carefully to ensure correct and safe operation.
- 전원 입력: The module can be powered via its Micro USB female port or through the dedicated input voltage wiring pads. Connect a 5V power source to either the Micro USB port or the '+' and '-' pads. Ensure the power source can output 1A or more for optimal charging.
- 배터리 연결: Connect the positive terminal of your lithium battery to the 'B+' pad on the module and the negative terminal to the 'B-' pad.
- 부하 연결(선택 사항): If you intend to power a load directly from the module while charging, connect the positive terminal of your load to the 'OUT+' pad and the negative terminal to the 'OUT-' pad.
이미지: 자세한 view of the TP4056 module, highlighting the Micro USB input, B+/B- battery terminals, and OUT+/OUT- load terminals.
중요 참고 사항: When connecting the battery for the first time, there might be no voltage output between OUT+ and OUT-. This is normal as the protection circuit needs activation. To activate it, connect a 5V voltage source to charge the module. If the battery was short-circuited or connected incorrectly (B+ and B- reversed), it will also require recharging to activate the protection circuit.
작동 지침
Once the module is correctly set up, operating it for battery charging is straightforward.
- 충전 시작: With the battery connected to B+ and B-, insert a mobile phone charger (or other 5V, 1A+ power source) into the Micro USB socket.
- 충전 표시기: A red LED light on the module will illuminate, indicating that the battery is currently charging.
- 충전 완료: Once the battery is fully charged, the red LED will turn off, and a green LED light will illuminate, signaling that charging is complete.
Image: The TP4056 module integrated into a simple circuit, demonstrating its connection to a lithium battery and a small light bulb as a load.
유지
To ensure the longevity and proper functioning of your TP4056 charging module, consider the following maintenance guidelines:
- 적절한 연결 해제: Always disconnect the load from the OUT terminals before connecting or disconnecting the battery or power input. Incorrect polarity or connection order can damage the module.
- 청결: 모듈에 먼지, 오물 및 습기가 닿지 않도록 하십시오. 필요한 경우 부드럽고 마른 천으로 닦아주십시오.
- 저장: Store the module in a dry, cool environment when not in use. Avoid extreme temperatures or direct sunlight.
- 손질: Handle the module with care to avoid physical damage to the components or solder joints.
문제 해결
If you encounter issues with your TP4056 charging module, refer to the following common problems and their solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 권 없음tage output from OUT+ and OUT- after first battery connection. | Protection circuit is inactive. | Connect a 5V power source to the module's input to initiate charging. This will activate the protection circuit. If the battery was short-circuited or connected incorrectly, it also needs recharging to activate. |
| 배터리가 충전되지 않거나 충전 속도가 느립니다. | Input power source is insufficient (less than 1A). | Ensure your mobile phone charger or power supply can output 1A or more. Lower current sources may not charge the battery effectively. |
| Module appears damaged or not functioning. | Incorrect wiring, especially reversed polarity on OUT terminals. | Verify all connections, especially the positive and negative terminals of the load (OUT+ and OUT-). Incorrect wiring can cause permanent damage. |
명세서
Detailed technical specifications for the MakerFocus TP4056 Charging Module:
- 입력 Voltage: 5V
- 충전 컷오프 Voltage: 4.2V ± 1 %
- 최대 충전 전류: 1000mA(1A)
- Battery Over-discharge Protection Voltage: 2.5V
- Battery Overcurrent Protection Current: 3A
- 보드 크기: 2.6 cm x 1.7 cm (approximately 1.02 inches x 0.67 inches)
- 품목 무게: 0.32 ounces (per module)
Image: The TP4056 module shown with its physical dimensions, indicating a length of 2.6cm (1.02 inches) and a width of 1.7cm (0.67 inches).
Image: A single TP4056 module placed on a digital kitchen scale, displaying its light weight.
보증 및 지원
Information regarding product warranty and dedicated customer support channels is not provided within this manual. For any inquiries or support needs, please refer to the product listing page on the retailer's website or contact the manufacturer, MakerFocus, directly through their official channels if available.
You may find additional information or contact details on the 해당 제품의 아마존 페이지.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.