1. 서론
The XTUGA RW2080 Wireless In-Ear Monitor System is designed to provide reliable and high-quality audio monitoring for musicians, performers, and audio professionals. Utilizing UHF band circuitry, this system offers stable signal transmission with a wide coverage range, making it suitable for various applications including stage performances, studio recordings, and lectures. This manual provides detailed instructions for setting up, operating, and maintaining your RW2080 system.
2. 패키지 내용
아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.
- 송신기 x 1
- Bodypack Receiver x 2
- 안테나 x 2
- 이어폰 x 2
- Cable Line x 4
- 전원 어댑터 x 1
- 사용 설명서 x 1
3. 제품 오버view
3.1 시스템 구성 요소
This image displays the complete XTUGA RW2080 Wireless In-Ear Monitor System, featuring the main rack-mountable transmitter unit and two portable bodypack receivers, each with an antenna and in-ear monitors. This setup allows for dual-channel monitoring.
3.2 Wireless Transmitter (Rack Unit)
The transmitter unit features a clear LCD screen displaying frequency and channel information. Key controls include headphone volume adjustment, set selection buttons, and a power switch on the front. The rear panel provides antenna connections, DC power input, and left/right channel audio inputs with corresponding volume controls.
3.3 RW2080 Bodypack Receiver
The compact bodypack receiver includes an antenna, an LCD screen showing battery status and RF signal, and up/down selection buttons. A headphone output jack and a combined switch/volume adjustment knob are located on the top and side for easy access during use.
3.4 주파수 조정
The system supports both automatic and manual frequency selection. Pressing the "Set" button on the transmitter allows for automatic scanning to avoid interference frequencies. Manual adjustment is also possible by moving the left/right selection knob and holding it down to confirm.
3.5 내구성 있는 구조
The main transmitter unit is constructed from high-quality brushed metal, ensuring durability and a professional appearance suitable for stage 및 스튜디오 환경.
3.6 실시간 모니터링
The transmitter unit includes a 6.5mm monitor connector, allowing for real-time audio monitoring directly from the transmitter using standard headphones.
4. 설정 지침
- 송신기 배치: Place the transmitter unit on a stable surface or install it into a standard equipment rack using the provided rackmount kit. Ensure adequate ventilation around the unit.
- 안테나 연결: Screw the two antennas securely into the antenna ports on the rear of the transmitter. Position them vertically for optimal signal reception.
- 전원 연결: Connect the power adapter to the DC power socket on the transmitter and plug it into a suitable power outlet.
- 오디오 입력: Connect your audio source (e.g., mixing console, audio interface) to the Left and Right channel inputs on the rear of the transmitter using the provided cables.
- Bodypack Batteries: 각 바디팩 수신기의 배터리함을 열고 극성을 확인하여 AA 배터리 2개를 삽입하십시오.
- 이어폰 연결: Plug the earphones into the headphone output jack on each bodypack receiver.
- 전원 켜기: Turn on the transmitter and then each bodypack receiver.
- 주파수 동기화:
- 자동 스캔: On the transmitter, press the "Set" button to initiate an automatic frequency scan. The system will select the clearest available frequency.
- 수동 선택: Alternatively, use the left/right selection knob on the transmitter to manually choose a frequency. Hold the knob down to confirm your selection.
5. 사용 설명서
- Adjusting Transmitter Input Level: Use the Left and Right volume controls on the rear of the transmitter to adjust the input audio level. Monitor the level indicators on the LCD screen to prevent clipping.
- Adjusting Bodypack Volume: Use the combined switch/volume adjustment knob on the bodypack receiver to control the listening volume of your earphones.
- 오디오 모니터링: Connect headphones to the 6.5mm jack on the front of the transmitter to monitor the audio being sent to the bodypacks. Adjust the headphone volume using the dedicated knob.
- Changing Frequencies During Operation: If interference occurs, you can re-scan for a clear frequency using the "Set" button on the transmitter. The bodypacks will automatically follow the transmitter's frequency change.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 이어폰에서 소리가 들리지 않습니다. |
|
|
| 간섭 또는 정적 소음 |
|
|
| Low volume or distorted audio |
|
|
| Bodypack LCD not displaying |
|
|
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델명 | RW2080 |
| 상표 | 엑스투가 |
| 연결 기술 | 무선(RF) |
| 주파수 범위 | 572-599MHz |
| 주파수 응답 | 15 kHz (XNUMX kHz) |
| 임피던스 | 16옴 |
| 헤드폰 잭 | 3.5 mm Jack (Bodypack), 6.5 mm Jack (Transmitter) |
| 제어 유형 | Volume Control, Touch (for frequency selection) |
| 재료 | 금속(송신기), ABS(바디팩) |
| 전원 공급 장치(바디팩) | AA 배터리 2개 (필수) |
| 제품 치수 | 20.47 x 4.72 x 14.17인치 (송신기) |
| 품목 무게 | 5.59파운드 |
| 무선 범위 | 최대 300피트(약 90미터) |
| 주파수 수 | 2x40 adjustable frequencies |
8. 유지관리
- 청소: 송신기와 바디팩 수신기의 표면은 부드럽고 마른 천으로 닦으십시오. 액체 세척제나 용제를 사용하지 마십시오.
- 배터리 교체: Replace bodypack batteries promptly when the low battery indicator appears to ensure uninterrupted performance.
- 저장: When not in use for extended periods, store the system in a dry, cool place away from direct sunlight and extreme temperatures. Remove batteries from bodypacks before long-term storage.
- 안테나 관리: Handle antennas with care to prevent bending or damage. Ensure they are securely attached during operation.