Maxxima M85417R Red LED Ultra Thin Round Hybrid STT and Back-Up Light Instruction Manual

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of your Maxxima M85417R Red LED Ultra Thin Round Hybrid Stop Turn Tail (STT) and Back-Up Light. Please read this manual thoroughly before installation and use to ensure proper function and safety. Retain this manual for future reference.

2. 제품 오버view

The Maxxima M85417R is a versatile LED lighting unit designed for vehicles requiring combined Stop, Turn, Tail (STT) and Back-Up light functions. It features 9 white LEDs for back-up lighting and 12 red LEDs for STT functions, all within an ultra-thin, round design. This light is suitable for various applications including trailers, trucks, RVs, and Jeep Wranglers.

그림 2.1: 전면 view of the Maxxima M85417R light, showcasing the red STT LEDs in the center and white back-up LEDs on the outer ring.

3. 특징

• Integrated STT and Back-Up Functions: Features 9 white back-up LEDs on the outer ring and 12 red stop, turn, and tail LEDs in the center.
• 컴팩트한 디자인: With a 5.5-inch diameter and an ultra-thin 0.5-inch depth, this light offers a low-profile 설치.
• 내구성 있는 구조: Equipped with a polycarbonate lens and a neoprene gasket for enhanced moisture resistance and longevity.
• 간편한 설치: Designed for flange mounting and includes necessary mounting screws and screw caps.
• DOT/SAE 규격 준수: Meets J1398, J585e, J1935, J593c standards, ensuring road safety compliance.
• Patented Lighting Optics: Incorporates advanced optics for optimal light distribution and visibility.

4. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• 1 x Maxxima M85417R Light Unit
• Mounting Hardware (screws, screw caps)
• 1 x Neoprene Gasket

5. 설정 및 설치

5.1 안전 예방 조치

• Always disconnect the vehicle's battery before beginning any electrical installation to prevent electrical shock or damage.
• 안전 안경 등 적절한 개인 보호 장비를 착용하세요.
• 설치 장소가 깨끗하고 잔해물이 없는지 확인하십시오.

5.2 장착 지침

1. Select a suitable flat mounting surface on your vehicle or trailer. The light requires a 1-inch diameter hole for the wiring to pass through.
2. Position the light and mark the locations for the mounting screws. The light features a flange mount design.
3. Drill pilot holes for the mounting screws and the central wiring hole.
4. Place the included neoprene gasket between the light and the mounting surface to ensure a sealed, moisture-proof installation.
5. Secure the light using the provided mounting screws and screw caps. Tighten screws evenly to avoid distorting the light housing.

그림 5.1: 각도 view of the light, showing the integrated wiring harness for connection.

그림 5.2: 사이드 프로file of the light, illustrating its ultra-thin design for flush mounting.

그림 5.3: 후면 view of the light, showing the wiring exit point and the neoprene gasket.

5.3 배선 연결

The Maxxima M85417R light comes with two 10-inch wires featuring female PL-3 pigtails. Connect these wires to your vehicle's electrical system according to the following general guide. Always consult your vehicle's specific wiring diagram for accurate connections.

• 백색 철사: 차량 섀시 접지에 연결하십시오.
• 검은색 와이어: Connect to vehicle's tail/running light circuit.
• Red Wire (from 3-wire plug): Connect to vehicle's brake/turn signal circuit.
• Red Wire (from 2-wire plug): Connect to vehicle's reverse light circuit.

Note: The ground wires for both light circuits are typically shared. Ensure all connections are secure, properly insulated, and protected from environmental elements.

For some vehicles, particularly those with older incandescent flasher relays (e.g., certain Jeep Wranglers), installing LED lights may cause 'hyper-flashing' of turn signals. This occurs because LED lights draw less current. To resolve this, an LED-compatible flasher relay or load resistors (not included) may be required.

6. 사용 설명서

The Maxxima M85417R light operates automatically in conjunction with your vehicle's electrical system:

• 후미등 기능: When your vehicle's headlights or parking lights are activated, the red LEDs will illuminate at a lower intensity, serving as tail lights.
• 신호등 기능: When the brake pedal is pressed, the red LEDs will illuminate at a higher intensity, signaling braking.
• 방향 지시등 기능: When the turn signal lever is engaged, the red LEDs will flash to indicate a turn or lane change.
• Back-Up Light Function: When the vehicle is shifted into reverse, the white LEDs on the outer ring will illuminate, providing clear back-up lighting.

Figure 6.1: The Maxxima M85417R light shown with both red (STT) and white (back-up) LEDs illuminated.

7. 유지관리

To ensure optimal performance and longevity of your Maxxima M85417R light:

• 청소: Clean the lens regularly with a soft cloth and mild soap and water. Avoid using abrasive cleaners or solvents, as these can damage the polycarbonate lens.
• 점검: Periodically inspect the light for any physical damage, cracks in the lens, or loose wiring connections.
• 개스킷 무결성: Ensure the neoprene gasket remains properly seated and intact to maintain its moisture-proof seal.

8. 문제 해결

• 조명이 작동하지 않음:
  • Check all wiring connections for proper contact and ensure they are securely fastened.
  • Verify that there is power supplied to the light's circuit.
  • Inspect the vehicle's fuses related to the lighting system.
• Turn Signals Hyper-Flashing:
  • This is a common issue when replacing incandescent bulbs with LED lights due to lower current draw.
  • Install an LED-compatible flasher relay or appropriate load resistors (not included) into the turn signal circuit.
• 렌즈 내부 습기:
  • Ensure the neoprene gasket is correctly positioned and not damaged.
  • Verify that all mounting screws are tightened evenly to create a proper seal.

9. 사양

10. 보증 및 지원

The Maxxima M85417R Red LED Ultra Thin Round Hybrid STT and Back-Up Light is covered by a 5년 보증 구매일로부터. 이 보증은 정상적인 사용 하에서 재료 및 제조상의 결함을 포함합니다.

For technical assistance, warranty claims, or any questions regarding your product, please contact Maxxima customer service. Refer to the product packaging or the official Maxxima web최신 연락처 정보는 사이트에서 확인하세요.