Focal RSE-165 Auditor Series 6.5" 2-Way Component Speakers

소개

The Focal RSE-165 Auditor Series 6.5" 2-Way Component Speakers are designed to deliver high-quality audio performance in your vehicle. This system includes 6.5-inch woofers, tweeters, and external crossover filters, providing a balanced and dynamic sound experience. This manual provides essential information for the proper installation, operation, and maintenance of your new speaker system.

상자 안에 무엇이 들어있나요?

Your Focal RSE-165 package should contain the following components:

• Two (2) 6.5-inch Woofers (RSE-165)
• 트위터 2개
• Two (2) External Crossover Filters
• 2개(2)의 스피커 그릴
• 장착 하드웨어

주요 특징

• Silk/Aluminum Tweeter: Provides clear and detailed high-frequency sound reproduction.
• 폴리프로필렌 콘: Ensures robust and responsive mid-bass performance.
• Separated Pre-wired Crossover (12dB/oct): Optimizes sound distribution between the woofer and tweeter for enhanced clarity.
• 최대 출력 100W: Capable of handling up to 100 Watts of peak power.
• Nominal Power 50W RMS: Designed for continuous power handling of 50 Watts RMS.

설정 및 설치

Proper installation is crucial for optimal performance. It is recommended that installation be performed by a qualified professional. Always disconnect the vehicle's battery before beginning any electrical work.

우퍼 설치

Image: A single Focal RSE-165 6.5-inch woofer, showing the polypropylene cone and the central phase plug. This is the main speaker driver for mid-range and bass frequencies.

Mount the 6.5-inch woofers securely in the designated speaker locations in your vehicle's doors or panels. Ensure a tight fit to prevent vibrations and rattles. Use the provided mounting hardware.

트위터 설치

Image: A Focal RSE-165 tweeter, featuring a black housing with a silver-colored grille over the silk/aluminum dome. This component reproduces high-frequency sounds.

Install the tweeters in a location that provides optimal sound imaging, typically at ear level or slightly above. Various mounting options (flush, surface, or angle) may be available depending on your vehicle and the tweeter's design. Connect the tweeter wires to the crossover.

크로스오버 연결

The external crossover filters are essential for directing the correct frequency ranges to the woofers and tweeters. Connect the input terminals of the crossover to your amplifier or head unit's speaker outputs. Then, connect the woofer output from the crossover to the 6.5-inch woofer and the tweeter output to the tweeter. Ensure correct polarity (+ to + and - to -) for all connections.

스피커 그릴

Image: A circular black metal mesh speaker grille with the 'FOCAL' logo at the bottom. This grille protects the woofer from physical damage.

Once the woofers are installed, attach the protective speaker grilles. These grilles protect the speaker cones from accidental damage.

Magnet Boot Cover

Image: A black rubber magnet boot cover, designed to fit over the magnet structure of a speaker. This cover provides protection and a clean finish.

The protective magnet boot cover should be placed over the woofer's magnet structure. This provides additional protection and a clean aesthetic finish.

스피커 작동하기

After installation, ensure all connections are secure before powering on your audio system. Start with the volume at a low level and gradually increase it to your desired listening level. Adjust the audio settings (bass, treble, balance, fader) on your head unit or amplifier to fine-tune the sound to your preference. Avoid excessive volume levels for prolonged periods to prevent speaker damage and hearing loss.

유지

Your Focal RSE-165 speakers require minimal maintenance to ensure long-lasting performance.

• 청소: Gently wipe the speaker grilles and surrounds with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the speaker components.
• 점검: Periodically check all wiring connections to ensure they remain secure. Loose connections can lead to poor sound quality or intermittent operation.
• 환경: While designed for automotive use, avoid exposing the speakers to extreme moisture or direct sunlight for extended periods, as this can degrade materials over time.

문제 해결

If you experience issues with your Focal RSE-165 speakers, refer to the following common troubleshooting steps:

• 소리 없음:
  • 헤드 유닛의 모든 배선 연결을 확인하세요.amplifier to the crossover, and from the crossover to the speakers. Ensure no wires are loose or disconnected.
  • 확인하다 amp리파이어 또는 헤드 유닛의 전원이 켜져 있고 정상적으로 작동합니다.
  • 오디오 소스와 볼륨 설정을 확인하세요.
• 왜곡된 소리:
  • 볼륨 레벨을 줄이세요. 왜곡은 종종 다음과 같은 경우에 발생합니다. amp앰프나 스피커가 과부하 상태입니다.
  • 스피커 콘이 헐거워졌는지 또는 서라운드가 손상되었는지 확인하십시오.
  • 확인하십시오 amplifier gain settings are not set too high.
• 스피커 하나가 작동하지 않습니다.
  • Inspect the wiring for the non-working speaker, including connections at the speaker, crossover, and amp리퍼.
  • Swap the non-working speaker with a known good one (if possible) to determine if the issue is with the speaker or the wiring/source.
• Lack of Bass or Treble:
  • Check the polarity of the speaker connections. Incorrect polarity can cause phase cancellation, leading to reduced bass response.
  • Adjust the bass and treble settings on your head unit or amp리퍼.
  • Ensure the crossover is correctly wired and functioning.

If these steps do not resolve the issue, contact Focal customer support or a professional car audio technician.

명세서

보증 정보

The Focal RSE-165 Auditor Series speakers are covered by a 2년 제조업체 보증. This warranty typically covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or visit the official Focal web대지.

지원하다

For further assistance, technical support, or warranty inquiries, please contact Focal customer service through their official website or the contact information provided in your product packaging. You may also consult authorized Focal dealers for professional advice and service.