Kohler 76331-CP Shower Arm with 2-Way Diverter Instruction Manual

1. 제품 오버view

The Kohler 76331-CP Shower Arm with 2-Way Diverter is a wall-mount fixture designed to direct water flow between a showerhead and a handshower. Constructed from brass, this unit features a polished chrome finish, engineered to resist corrosion and tarnishing. It includes a flange for installation and is compatible with standard 1/2-inch NPT connections.

Image 1.1: The Kohler 76331-CP Shower Arm with 2-Way Diverter, showcasing its polished chrome finish and integrated diverter mechanism.

2. 안전 정보

• 설치나 유지관리를 시작하기 전에 항상 주 수도 공급을 차단하세요.
• 보안경, 장갑 등 적절한 개인 보호 장비를 착용하십시오.
• 설치 과정의 어떤 부분이든 확실하지 않은 경우 자격을 갖춘 배관공에게 문의하세요.
• 모든 연결 부분이 안전하게 되어 누출을 방지하세요.
• Do not overtighten connections, as this can damage the product or plumbing.

3. 패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

• Shower Arm with 2-Way Diverter
• 플랜지

Note: Showerheads, handshowers, and additional flanges (K-76334 Traditional flange, K-76335 Square flange) are sold separately.

4. 사양

5. 설치 지침

5.1 필요한 도구 및 재료 (포함되지 않음)

• 조절 렌치
• Plumber's tape (thread sealant)
• 부드러운 천

5.2 설치 단계

1. 물 공급을 차단하세요: Locate and turn off the main water supply to your shower area. Open existing shower faucets to relieve pressure.
2. Remove Existing Shower Arm (if applicable): Unscrew the existing shower arm from the wall fitting. Clean any old sealant or debris from the wall pipe threads.
3. 새 샤워기 팔걸이 준비하기: Apply plumber's tape clockwise around the threaded end of the new Kohler shower arm (the end that connects to the wall). Ensure several wraps for a watertight seal.
4. Install Flange: Slide the decorative flange over the shower arm, ensuring it faces the wall.
5. Attach Shower Arm to Wall: Carefully thread the shower arm into the 1/2-inch NPT wall fitting. Hand-tighten first, then use an adjustable wrench to tighten an additional 1/2 to 1 full turn until secure and properly oriented. Do not overtighten.
6. 플랜지 위치: Slide the flange flush against the wall to cover the opening.
7. Install Showerhead and Handshower: Attach your desired showerhead to the top outlet and your handshower hose to the bottom outlet of the diverter. Apply plumber's tape to these connections as well.
8. 누출 테스트: Slowly turn the main water supply back on. Check all connections for leaks. If leaks occur, turn off water, tighten connections slightly, and re-test.

6. 사용 설명서

The 2-way diverter allows you to easily switch water flow between your main showerhead and a connected handshower.

• To use the Showerhead: Ensure the diverter handle is in the position that directs water upwards to the showerhead.
• To use the Handshower: Rotate the diverter handle to the position that directs water downwards to the handshower.
• To turn off water: Use your shower's main faucet handle to stop the water flow. The diverter only controls the direction of water, not the on/off function or temperature.

7. 유지관리 및 관리

• 청소: 광택이 나는 크롬 표면은 부드러운 천으로 닦으십시오.amp 천을 사용하십시오. 연마성 세제, 독한 화학 물질 또는 수세미는 마감재를 손상시킬 수 있으므로 사용하지 마십시오.
• 얼룩 청소: For water spots, use a mild soap solution and rinse thoroughly with clean water, then dry with a soft cloth.
• 정기 검사: Periodically check connections for any signs of leaks or corrosion.

8. 문제 해결

9. 보증 및 지원

For specific warranty information and customer support, please refer to the official Kohler website or contact Kohler directly. Keep your purchase receipt for warranty claims.

Kohler Official Web대지: www.kohler.com