iFlight 43234-1976

iFlight 2.4G Receiver Antenna (150mm, IPEX 4) Instruction Manual

모델 : 43234-1976

소개

This manual provides essential information for the proper installation, operation, and maintenance of your iFlight 2.4G Receiver Antenna. This antenna is designed for use with compatible FrSky receivers and remote controllers, featuring a 150mm length and an IPEX 4 connector.

제품의 최적 성능과 수명 연장을 위해 사용 전에 이 설명서를 주의 깊게 읽어 주십시오.

제품 특징

  • 커넥터 유형: 2.4G receiver antenna with IPEX 4 Generation connector.
  • 길이: 5.9 inches (150mm) total length.
  • 재료: RF113 Silver plated Wire Material for enhanced signal transmission.
  • 성능: Precision machining ensures low loss signal stability and high sensitivity.
  • 호환성: Specifically designed for FrSky XM+, X4R, and X4R-SB receivers, including mini versions.

패키지 내용

The package contains 20 pieces of iFlight 150mm 2.4G Receiver Antennas.

A bundle of iFlight 2.4G receiver antennas with IPEX 4 connectors.

Image: A bundle of iFlight 2.4G receiver antennas, showcasing the IPEX 4 connectors and the overall design.

설정 및 설치

  1. 커넥터 유형을 식별하십시오. Ensure your receiver uses an IPEX 4 port. This antenna is designed for the smaller IPEX 4 connector. Refer to the comparison image below.
  2. Comparison image showing the 'new version IPEX4' connector next to a 'regular version IPEX (bigger port)'.

    Image: A side-by-side comparison of the new IPEX 4 connector (smaller) and a regular IPEX connector (larger port), highlighting the difference.

  3. 수신기에 연결: Carefully align the IPEX 4 connector of the antenna with the corresponding port on your FrSky receiver. Apply gentle, even pressure until you feel a distinct "snap," indicating a secure connection.
  4. 안테나 배치: For optimal signal reception, position the antenna away from carbon fiber frames, metal objects, and other electronic components that may cause interference. Ensure the active element (the exposed wire tip) is not obstructed.
  5. 보안 안테나: Use heat shrink tubing, zip ties, or appropriate mounting solutions to secure the antenna in place, preventing it from moving during flight or operation. Avoid sharp bends or kinks in the antenna wire.
A FrSky receiver with an iFlight 2.4G receiver antenna connected.

Image: A FrSky receiver with an iFlight 2.4G receiver antenna properly connected. Note: The receiver is for reference only and not included with the antenna pack.

작동 지침

Once the antenna is securely connected and properly positioned, the receiver will utilize it for 2.4G signal reception from your remote controller. No specific operational steps are required for the antenna itself beyond proper installation.

Always perform a range check before operating your RC model to ensure reliable signal strength and control. Consult your receiver's manual for specific binding and range testing procedures.

유지

  • 정기 검사: Periodically inspect the antenna wire and connector for any signs of damage, fraying, or corrosion.
  • 청결: Keep the antenna free from dirt, dust, and moisture. Use a soft, dry cloth for cleaning if necessary.
  • 저장: When not in use, store the antennas in a dry, cool place, protected from physical damage.
  • 대사: If the antenna wire is cut, bent severely, or the connector is damaged, replace it immediately with a new iFlight 2.4G Receiver Antenna to maintain signal integrity.

문제 해결

Problem: Poor Signal / Frequent Failsafes
  • 연결 확인: Ensure the antenna is securely connected to the receiver's IPEX 4 port. A loose connection can severely degrade signal quality.
  • 안테나 배치: Verify that the antenna is positioned optimally, away from obstructions and interference sources. Ensure the active element is exposed.
  • 안테나 손상: Inspect the antenna for any physical damage. Even minor cuts or kinks can affect performance. Replace if damaged.
  • 수신기 문제: If multiple antennas show similar issues, the problem might lie with the receiver itself or the remote controller. Consult their respective manuals.
Problem: Antenna Does Not Fit
  • 커넥터 유형을 확인하십시오. This antenna uses an IPEX 4 (smaller) connector. If your receiver requires a larger IPEX (U.FL) connector, this antenna will not be compatible. Double-check your receiver's specifications.

명세서

매개변수
모델 번호 43234-1976
안테나 유형 2.4G Receiver Antenna
커넥터 유형 IPEX 4 Generation
길이 150mm(5.9인치)
와이어 소재 RF113 Silver plated
임피던스 50옴
주파수 범위 2400~2500MHz
SWR <= 2.0
얻다 2
작동 온도 -40 °C ~ +65 °C
보관 온도 -40 °C ~ +80 °C
Item Weight (per antenna) Approximately 0.5g (as shown in product images)
An iFlight 2.4G receiver antenna laid out next to a ruler, indicating its 150mm length.

Image: The 150mm length of the antenna measured against a ruler.

An iFlight 2.4G receiver antenna coiled on a digital scale, showing a weight of 0.5g.

Image: A single antenna on a digital scale, displaying a weight of 0.5 grams.

공식 제품 영상

Video: This official video demonstrates the 2.4G Receiver Antenna, highlighting its features and compatibility with Futaba and FrSky systems. (Duration: 0:24)

보증 및 지원

For warranty information and technical support, please refer to the official iFlight web해당 웹사이트를 방문하거나 고객 서비스 센터에 직접 문의하십시오. 구체적인 보증 조건은 지역 및 판매점에 따라 다를 수 있습니다.

© 2026 iFlight. 모든 권리 보유.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.