AmScope 3.5X-180X Trinocular Stereo Zoom Microscope Instruction Manual

1. 서론

This manual provides comprehensive instructions for the AmScope 3.5X-180X Trinocular Stereo Zoom Microscope. This instrument is designed for detailed observation, inspection, and digital imaging across various applications, including research, gemology, engraving, and electronics. Please read this manual thoroughly before operating the microscope to ensure proper setup, safe use, and optimal performance.

2. 안전 정보

• 현미경은 항상 조심스럽게 다루십시오. 갑작스러운 충격이나 진동을 피하십시오.
• 현미경이 넘어지지 않도록 안정적이고 평평한 표면에 놓으십시오.
• 현미경을 직사광선, 고온 또는 고습에 노출시키지 마십시오.
• 청소 또는 유지 보수를 하기 전에 전원 코드를 뽑으십시오.
• 장치와 함께 제공된 전원 어댑터만 사용하십시오.
• Keep lenses clean and free from dust and fingerprints. Use specialized lens cleaning solutions and cloths.
• Avoid looking directly into the LED light source for extended periods.
• 어린이의 손이 닿지 않는 곳에 보관하세요.

3. 패키지 내용

포장을 풀 때 모든 구성 요소가 들어 있고 손상되지 않았는지 확인하세요.

• Trinocular Stereo Zoom Microscope Head
• Super Widefield Eyepieces (e.g., WF10X/20)
• Single-Arm Boom Stand with Base
• 144-LED Ring Light with Dimmer Control
• 10MP USB3 Digital Camera with USB Cable
• Software CD for Camera (or download instructions)
• Power Adapter for LED Ring Light
• 더스트 커버
• 사용 설명서 (본 문서)

4. 설치 및 조립

Follow these steps to assemble your AmScope microscope:

4.1. Boom Stand Assembly

1. 무거운 받침대를 안정적인 작업대 위에 놓으십시오.
2. Insert the vertical pillar into the hole on the base and secure it with the locking screw from underneath the base.
3. Attach the horizontal boom arm to the vertical pillar using the provided clamp and knobs. Ensure it is securely tightened.

Figure 1: Fully assembled AmScope Trinocular Stereo Zoom Microscope with boom stand.

4.2. Microscope Head Installation

1. Carefully remove the microscope head from its packaging.
2. Loosen the locking screw on the microscope head holder located at the end of the boom arm.
3. Insert the microscope head into the holder, ensuring it is seated firmly.
4. Tighten the locking screw to secure the microscope head in place.
5. Insert the widefield eyepieces into the ocular tubes.

Figure 2: Microscope head mounted on the boom arm, showing focus and zoom controls.

4.3. LED Ring Light Installation

1. Slide the 144-LED ring light onto the objective lens housing of the microscope head.
2. Secure it with the small set screws on the ring light, ensuring it is centered and stable.
3. Connect the ring light cable to the dimmer control box.
4. Connect the power adapter to the dimmer control box and then plug it into a power outlet.

Figure 3: The 144-LED ring light and its control unit.

4.4. Digital Camera Setup

1. Remove the protective cap from the trinocular port on the microscope head.
2. Insert the 10MP USB3 digital camera into the trinocular port. Ensure it is seated correctly.
3. Connect the USB3 cable from the camera to an available USB3 port on your computer.
4. Install the camera software from the provided CD or download it from the AmScope web사이트. 화면의 지시에 따라 설치하세요.

5. 사용 설명서

5.1. 전원 켜기 및 점등

• Ensure the LED ring light power adapter is plugged in.
• Flip the ON/OFF switch on the dimmer control box to the "ON" position.
• Adjust the brightness using the dimmer knob on the control box.

5.2. 확대 및 초점 조절

• Place your specimen on the working stag대물렌즈 아래에 있습니다.
• 접안렌즈를 통해 보세요.
• Rotate the zoom knob on the microscope head to adjust the magnification from 3.5X to 180X.
• Use the large focus knobs on the microscope head holder to bring the specimen into sharp focus.
• Adjust the interpupillary distance by moving the eyepiece tubes closer or further apart until you see a single, circular field of view.
• Adjust the diopter on one eyepiece (usually the left one) to compensate for differences in vision between your eyes. Focus with the main focus knob using the non-diopter eyepiece, then adjust the diopter ring on the other eyepiece until that eye is also in sharp focus.

5.3. 디지털 카메라 사용하기

• Launch the installed camera software on your computer.
• The software should detect the 10MP USB3 camera and display a live feed from the microscope.
• Use the software interface to capture still images, record videos, and perform measurements. Refer to the camera software's specific user guide for detailed features and functions (e.g., image-stitching, extended-depth-of-focus for Windows software).
• Adjust the camera's focus independently if your trinocular port has a focus adjustment, or fine-tune the main microscope focus for optimal camera image clarity.

6. 유지관리

• 렌즈 세척: Use a soft lens brush to remove dust. For smudges, apply a small amount of lens cleaning solution to a lens tissue and gently wipe in a circular motion. Avoid touching lens surfaces with bare fingers.
• 세척 본체: 현미경 본체를 부드러운 천으로 닦으십시오.amp cloth. Do not use organic solvents or harsh chemicals.
• 저장: When not in use, cover the microscope with the provided dust cover to protect it from dust and debris. Store in a cool, dry place.
• 매끄럽게 하기: Moving parts are factory-lubricated. Do not attempt to lubricate them yourself unless specifically instructed by AmScope support.

7. 문제 해결

8. 사양

• 모델: SM-3TZZ-144-10M3
• 현미경 유형: Trinocular Stereo Zoom
• 배율 범위: 3.5X - 180X (continuous zoom)
• 접안렌즈: Super Widefield (e.g., WF10X/20)
• 작동 거리: 약 8인치(200mm)
• 분야 View: Approximately 2-1/2 inches (65mm)
• 조명: 144-LED Ring Light with Dimmer
• 카메라: 10MP USB3 Digital Camera
• 카메라 호환성: Windows XP/Vista/7/8/10, Mac, Linux
• 스탠드 유형: Single-Arm Boom Stand
• 헤드 기울기: 45도
• 객관적인 렌즈 설명: 무채색
• 전원: 코드식 전기
• 품목 무게: 60파운드(대략)
• 패키지 크기: 22.44 x 17.72 x 12.2인치(대략)

9. 보증 및 지원

AmScope products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please contact AmScope customer service directly. Details can typically be found on the official AmScope web사이트나 구매 문서를 통해 확인하세요.

제조업체: United Scope, LLC