소개
The Anderic RR3UNV is a versatile 3-device universal remote control designed to simplify the management of your entertainment systems. This remote can control up to three different devices, including TVs, DVD players, VCRs, cable boxes, satellite receivers, and audio systems. It features a learning function for expanded compatibility and glow-in-the-dark buttons for ease of use in low-light conditions. This manual provides detailed instructions for setup, operation, and maintenance of your RR3UNV remote control.
설정
1. 배터리 설치
The Anderic RR3UNV remote requires two (2) AA batteries for operation. Ensure correct polarity when inserting the batteries.
- 리모컨 뒷면에 있는 배터리함 덮개를 여세요.
- 배터리함 안쪽에 표시된 대로 (+) 및 (-) 단자를 맞춰 새 AA 배터리 두 개를 넣으세요.
- 배터리 덮개를 단단히 닫으세요.
이미지: 후면 view of the Anderic RR3UNV remote control, showing the battery compartment cover at the bottom. The back is black with a textured grip area.
2. 리모컨 프로그래밍
The RR3UNV can be programmed using direct code entry or the learning function. Refer to the included code booklet for a list of compatible device codes.
2.1. 직접 코드 입력
- 프로그래밍하려는 기기(예: TV, DVD 플레이어)를 켜세요.
- 원하는 기기 버튼을 길게 누르세요(TV, DVD, 또는 오디오) for approximately 5 seconds until the device button lights up and stays lit.
- Enter the 3-digit code for your device brand from the code booklet.
- If the code is valid, the device button light will blink twice and then turn off.
- 리모컨을 테스트하려면 버튼을 누르세요. 힘 button. If the device turns off, the programming was successful. If not, repeat the process with the next code listed for your brand.
2.2. 학습 기능
The learning function allows the RR3UNV to learn commands directly from your original remote control.
- Place the RR3UNV and your original remote control head-to-head on a flat surface, approximately 1-2 inches apart.
- 원하는 기기 버튼을 길게 누르세요(TV, DVD, 또는 오디오) on the RR3UNV for approximately 5 seconds until the device button lights up and stays lit.
- Press and release the button on the RR3UNV that you want to program (e.g., 힘). The device button light will start blinking slowly.
- Press and hold the corresponding button on your original remote control (e.g., 힘).
- The device button light on the RR3UNV will blink rapidly three times and then stay lit, indicating successful learning.
- Repeat steps 3-5 for all other buttons you wish to program.
- To exit learning mode, press the device button again. The light will turn off.
이미지: 앞면 view of the Anderic RR3UNV remote control. It is black with silver trim, featuring glow-in-the-dark buttons for power, device selection, number pad, volume, channel, playback, menu, and navigation controls.
리모컨 조작하기
Once programmed, the Anderic RR3UNV remote functions like your original remote. Select the desired device mode before sending commands.
- 장치 선택: 를 누르세요 TV, DVD, 또는 오디오 button to select the device you want to control. The selected device button will light up briefly.
- 힘: 를 누르세요 힘 선택한 기기를 켜거나 끄는 버튼입니다.
- 볼륨 조절: 사용하세요 볼륨+ 그리고 권 볼륨을 조절하는 버튼.
- 채널 제어: 사용하세요 CH+ 그리고 CH- 채널을 변경하는 버튼입니다.
- 무음: 를 누르세요 음소거 소리를 음소거하는 버튼입니다.
- 숫자 패드: 숫자 버튼(0-9)을 사용하여 채널 번호 또는 기타 숫자 값을 직접 입력하십시오.
- 재생 컨트롤: 버튼 같은 것들 놀다, 정지시키다, 멈추다, 기록, 주사-, 그리고 스캔+ control media playback functions.
- 항해: The directional arrow buttons and SELECT/OK button are used for menu navigation.
- 메뉴/안내/정보/출구: These buttons provide access to device-specific menus, program guides, information displays, and exit functions.
- 입력: 그만큼 입력 button cycles through available input sources on your TV.
- 잠: 그만큼 잠 button may activate a sleep timer function on compatible devices.
- CC/Subtitles: 그만큼 CC/SUBTITLE button toggles closed captions or subtitles.
유지
- 배터리 교체: Replace batteries when the remote's performance degrades or if the device indicator light does not illuminate. Always replace both AA batteries at the same time with new ones.
- 청소: Clean the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the remote's surface or internal components.
- 저장: Store the remote in a dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove the batteries to prevent leakage.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 리모컨이 전혀 작동하지 않습니다. | 배터리가 방전되었거나 잘못 삽입되었습니다. | 배터리를 새 AA 배터리로 교체하고 극성이 올바른지 확인하세요. |
| 리모컨으로 일부 기능은 제어할 수 있지만 다른 기능은 제어할 수 없습니다. | Incorrect device code or incomplete learning. | Try a different code for your device brand or re-program specific buttons using the learning function. |
| Device does not respond to remote commands. | Remote not aimed correctly; obstruction; device not selected. | Ensure the remote is aimed directly at the device's IR sensor. Remove any obstructions. Press the correct device button (TV, DVD, AUDIO) before sending commands. |
| 학습 기능에 실패했습니다. | Original remote batteries low; remotes too far apart; ambient light interference. | Ensure original remote has fresh batteries. Place remotes 1-2 inches apart. Try learning in a dimly lit room. |
명세서
- 상표: 안 데릭
- 모델 이름: RR3UNV
- 모델 번호: RR3UNV
- 지원되는 최대 장치 수: 3
- 연결 기술 : 적외선 (IR)
- 배터리 유형: AA 배터리 2개(포함되지 않음)
- 최대 범위: 약 25피트(7.6미터)
- Button Quantity: 41
- 특별 기능: Universal compatibility, Learning function, Glow-in-the-dark buttons
- 호환 장치: TV, DVD, VCR, Cable, Satellite, Audio, DVD/VCR Combos, TV/DVD/VCR Combos
보증 정보
Anderic products typically come with a limited warranty covering manufacturing defects. For specific warranty details, including duration and terms, please refer to the documentation included with your purchase or visit the official Anderic web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
고객 지원
For technical assistance, programming help, or general inquiries regarding your Anderic RR3UNV remote control, please contact Anderic customer support:
- Web대지: www.앤더릭닷컴
- 핸드폰: 1-855-573-6683
Please have your model number (RR3UNV) and a description of your issue ready when contacting support.