Aqualin Dual Outlet Irrigation Timer Controller

소개

Thank you for choosing the Aqualin Dual Outlet Irrigation Timer Controller. This device is designed to automate your garden watering, providing convenience and efficient water management. With two independently programmable outlets, you can customize watering schedules for different areas of your garden or lawn. Please read this manual carefully to ensure proper installation, operation, and maintenance of your irrigation timer.

제품 끝view

The Aqualin YL21060 features a clear LCD display, intuitive controls, and robust construction for outdoor use. It offers flexible programming options, including a rain delay function to conserve water.

The Aqualin Dual Outlet Irrigation Timer Controller, shown attached to a faucet, featuring a digital display and two independent water outlets.

주요 특징:

• 독립형 콘센트 2개: Program two separate watering zones with unique schedules.
• 유연한 프로그래밍: Set desired frequency and duration for each zone.
• 비 지연 기능: Skip watering sessions during and after rainy days (1-7 days).
• 수동 급수: Initiate immediate watering without interrupting programmed cycles.
• IPX5 방수 : Designed for outdoor durability.
• 간편한 설치: Features a swivel joint for quick connection to standard faucets (3/4" or 1").
• LCD 디스플레이: Clear digital display for easy programming and monitoring.
• 입구 필터: Helps prevent debris from entering the system.

오버view of the Aqualin timer's features, including manual watering, IPX5 waterproofing, two independent zones, an inlet filter, an LCD display, and a rain delay function.

A diagram showing the physical dimensions of the Aqualin timer: 16cm height, 14.5cm length, and 9cm depth.

설정

1. 배터리 설치:
   • Open the battery compartment cover located at the back of the unit.
   • Insert two (2) AA alkaline batteries, ensuring correct polarity.
   • 배터리 칸을 단단히 닫으세요.
2. 수도꼭지에 연결:
   • Attach the timer to a standard 3/4" (19mm) or 1" (25mm) outdoor faucet. The swivel joint allows for easy, tool-free connection.
   • Ensure the connection is tight to prevent leaks. Do not overtighten.
   • 정원용 호스를 타이머 하단에 있는 두 개의 독립형 배출구에 연결하세요.
3. 초기 시간 설정:
   • Rotate the main dial to the 'SET CLOCK' position.
   • Use the '+' and '-' buttons to adjust the current time.
   • Press 'ENTER' to confirm the setting.
4. 강우 감지 센서(선택 사항):
   • If using an external rain sensor, connect it to the designated rain sensor hole.
   • Ensure the internal contacts for the rain sensor are not bent if no sensor is connected, as this can prevent watering.

클로즈업 view highlighting the 360-degree anti-leak design, the rain sensor input hole, and the battery compartment cover of the Aqualin timer.

작동 지침

The Aqualin timer offers both automatic and manual watering modes for maximum flexibility.

1. Automatic Function Programming:

The timer allows independent programming for two zones (Zone 1 and Zone 2).

This image illustrates the independent programming capabilities of the Aqualin timer, with separate settings for start time, duration, and frequency for Zone 1 and Zone 2.

1. 시작 시간 설정:
   • Rotate the dial to 'START TIME'.
   • Use '+' and '-' to set the desired start time for Zone 1. Press 'ENTER'.
   • Repeat for Zone 2.
2. 기간 설정:
   • Rotate the dial to 'HOW LONG'.
   • Use '+' and '-' to set the watering duration for Zone 1 (1 minute to 240 minutes). Press 'ENTER'.
   • Repeat for Zone 2.
3. 빈도 설정:
   • Rotate the dial to 'HOW OFTEN'.
   • Use '+' and '-' to set the watering frequency for Zone 1 (e.g., every 12 hours, every 3 days). Press 'ENTER'.
   • Repeat for Zone 2.
4. 프로그램 실행:
   • Once all settings are configured, rotate the dial to 'RUN'. The timer will now operate according to your programmed schedule.

2. Rain Delay Function:

To prevent overwatering and save water, use the rain delay feature.

The timer's display showing the Rain Delay feature, which allows skipping irrigation for 1 to 7 days to conserve water.

• While in 'RUN' mode, press the 'RAIN DELAY' button.
• Use '+' or '-' to select the desired delay period (e.g., 24, 48, 72 hours, or up to 7 days).
• Press 'ENTER' to activate the rain delay. Watering will resume automatically after the selected period.

3. Manual Watering:

설정된 급수 일정에 영향을 주지 않고 즉시 물을 주는 방법:

The Aqualin timer in manual watering mode, allowing for immediate irrigation without altering programmed schedules.

• While in 'RUN' mode, press the 'MANUAL/CLEAR' button.
• Use '+' or '-' to set the desired manual watering duration (1 to 360 minutes).
• Press 'ENTER' to start manual watering.
• To stop manual watering, press 'MANUAL/CLEAR' again.

유지

• 배터리 교체: Replace AA batteries every 1.5 to 3 months, or when the low battery indicator appears on the display, to ensure continuous operation.
• 흡입 필터 청소: Periodically check and clean the inlet filter to prevent clogging and maintain optimal water flow. Remove the timer from the faucet, unscrew the inlet connection, and rinse the filter under running water.
• 겨울철 : Before the first frost, disconnect the timer from the faucet and hoses. Drain any remaining water from the unit and store it indoors in a dry, frost-free location.
• 일반 청소: 광고로 타이머 지우기amp 천으로 먼지와 이물질을 제거하세요. 연마성 세제나 용제는 사용하지 마세요.

문제 해결

명세서

보증 및 지원

The Aqualin Dual Outlet Irrigation Timer Controller comes with a standard manufacturer's warranty. For specific warranty details, technical assistance, or to download a detailed PDF instruction manual, please visit the official Aqualin web사이트를 방문하거나 고객 서비스 부서에 문의하세요. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.

사용 시나리오

This image illustrates the versatility of the Aqualin timer, suitable for various watering applications such as gardens, lawns, farms, and potted plants.