소개
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your V-TAC VT-5087 PIR Infrared Motion Sensor. Please read this manual carefully before installation and retain it for future reference. This sensor is designed for ceiling mounting and automatically controls lighting based on detected motion.
주요 특징
- PIR (Passive Infrared) Motion Detection
- 360-degree Detection Angle
- Ceiling Mount Design
- Adjustable LUX (Ambient Light) Sensitivity
- Adjustable TIME Delay
- Maximum Load: 1000W (LED) / 2000W (Traditional Lighting)
그림 1: V-TAC VT-5087 PIR Infrared Motion Sensor. This image highlights the sensor's capabilities, including a maximum load of 1000W for LED lighting, automatic on/off based on motion, and a 'SUN' setting for daylight operation (only works when natural light is 3 lux or less). Detection motion speed is 0.6-1.5m/s.
설정 및 설치
중요한 안전 정보: Installation must be performed by a qualified electrician and in accordance with all local electrical codes. Ensure power is disconnected at the circuit breaker before beginning installation to prevent electric shock.
장착 위치
- Choose a ceiling location where the sensor can cover the desired detection area without obstruction.
- Avoid mounting near heat sources (e.g., air vents, heaters) or direct sunlight, as these can cause false triggers.
- Ensure the mounting surface is stable and can support the sensor.
배선 지침
- 회로 차단기에서 주전원을 끕니다.
- 조심스럽게 바깥쪽 c를 제거하세요asing of the sensor to access the wiring terminals.
- Connect the live (L), neutral (N), and load (L') wires according to the diagram provided on the sensor or in the packaging. Typically:
- L: Live input from power supply
- N: Neutral input from power supply and neutral to load
- L': Switched live output to the light fixture (load)
- Securely fasten the sensor to the ceiling using the provided screws and anchors.
- 외부 c를 교체하세요asing.
- Restore power and test the sensor.
그림 2: 뒤쪽 view of the sensor, illustrating the wiring terminals (L, N, L') and the LUX and TIME adjustment knobs. Mounting screws and wall anchors are also shown.
작동 지침
The V-TAC VT-5087 sensor features two adjustable controls: LUX and TIME. These allow you to customize the sensor's behavior to suit your environment and preferences.
조정 손잡이
- LUX Control: This knob adjusts the ambient light threshold at which the sensor will activate.
- Turn towards the 해 symbol for activation in both daylight and darkness (e.g., >2000 LUX).
- Turn towards the 달 symbol for activation only in low light conditions (e.g., <3 LUX).
- TIME Control: This knob sets the duration the light remains on after motion is detected and then stops.
- Adjust from minimum (approx. 10 seconds) to maximum (approx. 15 minutes).
- The timer resets if motion is detected again before the set time expires.
그림 3: 상세한 view of the easy-access control knobs for LUX adjustment and TIME adjustment. This image also indicates the rated load for LED lighting (up to 1000W) and traditional lighting (up to 2000W).
Detection Range and Angle
The sensor offers a 360-degree detection angle, making it suitable for central ceiling placement. The maximum detection distance is approximately 6 meters (up to 8 meters at <24°C). The detection motion speed is 0.6-1.5 m/s.
그림 4: Diagram showing the impressive detection features, including a 360-degree detection range, adjustable light intensity range (<3 to 2000 LUX), and a detection distance of 8 meters (up to 24°C). The time delay is adjustable from 10 seconds to 15 minutes.
유지
The V-TAC VT-5087 PIR sensor requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:
- 청소: Gently wipe the sensor lens and housing with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the unit.
- 장애물: Periodically check that there are no new obstructions (e.g., furniture, decorations) blocking the sensor's field of view.
- 힘: Always disconnect power before performing any cleaning or inspection to prevent electric shock.
문제 해결
If you experience issues with your V-TAC VT-5087 PIR sensor, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 움직임이 감지되어도 조명이 켜지지 않습니다. |
|
|
| 조명이 계속 켜져 있거나 무작위로 켜집니다. |
|
|
| 탐지 범위가 너무 짧거나 일관성이 없습니다. |
|
|
기술 사양
| 특징 | 사양 |
|---|---|
| 모델 번호 | VT-5087 |
| 상표 | 브이택 |
| 색상 | 검은색 |
| 전원 | 코드식 전기 |
| 빈도 | 60Hz |
| 장착 유형 | 천장 마운트 |
| 최대 감지 범위 | 6 Meters (up to 8 meters at <24°C) |
| 감지 각도 | 360도 |
| 시간 지연 조정 | Min. 10s ± 3s / Max. 15min ± 2min |
| Light Intensity Range (LUX) | <3 ~ 2000 LUX (조절 가능) |
| 감지 모션 속도 | 0.6-1.5m/초 |
| Rated Load (LED) | 최대 1000W |
| Rated Load (Traditional Lighting) | 최대 2000W |
| 작동 온도 | 15 Degrees Celsius (Note: This seems like a minimum or specific test temperature, not a range.) |
| IP 등급 | IP20 |
보증 정보
This V-TAC VT-5087 PIR Infrared Motion Sensor comes with a 2년 보증 구매일로부터 유효합니다. 본 보증은 정상적인 사용 조건에서 발생하는 재료 및 제조상의 결함에 적용됩니다. 보증 청구를 위해 구매 증빙 자료를 보관해 주십시오. 부적절한 설치, 오용, 사고 또는 무단 개조로 인한 손상은 보증 대상에서 제외됩니다.
그림 5: Product packaging for the V-TAC Infrared Motion Sensor, clearly indicating a 2-year warranty and other features like 360-degree detection, 6m distance, and IP20 rating.
고객 지원
For further assistance, technical support, or warranty inquiries, please contact V-TAC customer service. Refer to the V-TAC official web가장 최신의 연락처 정보는 해당 사이트나 제품 포장에서 확인하세요.
브이택 Web대지: www.v-tac.eu