WarmlyYours UDG-4999
WarmlyYours OJ Electronics UDG-4999 nHance 프로그래밍 가능 온도 조절기 사용 설명서
Model: UDG-4999 | Brand: WarmlyYours
소개
This user manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your WarmlyYours OJ Electronics UDG-4999 nHance Programmable Thermostat. This advanced thermostat is designed to deliver a maximum level of comfort for your electric floor heating system, featuring dual voltage compatibility (120V/240V), an energy log, a built-in self-testing GFCI, and pre-programmed settings for ease of use. Its intuitive user-interface and large, backlit display ensure clear readability and simple control.
안전 정보
Always adhere to local electrical codes and regulations. Installation should be performed by a qualified electrician. Disconnect power at the circuit breaker before installing or servicing the thermostat. This thermostat includes a Class A GFCI (Ground Fault Circuit Interrupter) for enhanced safety. Test the GFCI regularly as per the instructions to ensure proper function.
- 설치하기 전에 전원이 꺼져 있는지 확인하십시오.
- 젖은 손으로 온도 조절 장치를 작동하지 마십시오.
- 온도 조절 장치를 물이나 과도한 습기에 노출시키지 마십시오.
- Keep out of reach of children. The "Child-Lock" function can be activated for added safety.
설정 및 설치
The UDG-4999 thermostat is designed for easy installation. It is crucial to follow the wiring diagrams provided in the full user manual (available as a PDF document) and ensure all connections are secure and compliant with electrical standards.

그림 1: 전면 view of the WarmlyYours nHance Programmable Thermostat, showing the large digital display and control buttons.
주요 설치 단계:
- 전원 차단: 메인 배전반에서 난방 회로의 전원을 끄십시오.
- 설치: 온도 조절기를 표준 전기 박스에 설치하십시오.
- 배선: Connect the power supply, heating cable, and floor sensor wires according to the provided wiring diagram. The thermostat supports both 120V and 240V systems.
- 바닥 센서 : The complimentary 10K ohm floor sensor must be installed in the floor and connected to the thermostat for accurate floor temperature control and energy-efficient operation.
- 초기 설정 : Upon first power-up, the thermostat will guide you through initial settings, including time, date, and temperature units.
- Wi-Fi Connectivity (if applicable): For models with Wi-Fi, follow the on-screen prompts to connect to your home network and download the "Microline" app for remote control and scheduling.

Figure 2: The WarmlyYours nHance Thermostat seamlessly integrated into a modern living space, demonstrating its sleek design.
작동 지침
The nHance thermostat offers intuitive control for your floor heating system. Use the touch screen or physical buttons (if present) to navigate menus and adjust settings.
기본 작업:
- 설정 온도: Adjust the desired floor or ambient temperature using the up/down arrows on the display.
- 프로그램 일정: Utilize the programmable features to set daily or weekly heating schedules, optimizing comfort and energy consumption. The thermostat allows for quick and easy setup for your exact needs.
- Energy Log: Monitor your heating system's energy usage through the built-in energy log feature, helping you track and manage consumption.
- 어린이 잠금 기능: Activate the "Child-Lock" feature to prevent unauthorized changes to settings.
유지
Your WarmlyYours nHance thermostat requires minimal maintenance to ensure optimal performance.
- 청소: 온도 조절 장치 표면을 부드러운 천으로 닦으세요.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
- GFCI 테스트: Regularly test the GFCI function by pressing the "Test" button on the thermostat. The GFCI should trip, cutting power to the heating system. Reset the GFCI by pressing the "Reset" button. If it does not trip or reset, contact a qualified electrician.
문제 해결
If you encounter issues with your thermostat, refer to the following common troubleshooting steps. For more detailed guidance, consult the full user manual PDF.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 온도 조절기 디스플레이가 비어 있습니다. | No power, tripped circuit breaker, loose wiring. | 회로 차단기를 점검하세요. 모든 배선 연결이 안전한지 확인하세요. |
| 바닥 난방이 안 돼요. | GFCI tripped, incorrect settings, floor sensor issue. | Reset GFCI. Verify temperature settings and schedule. Check floor sensor connection. |
| 온도 측정값이 정확하지 않습니다. | Floor sensor malfunction or incorrect calibration. | Ensure floor sensor is properly installed. Refer to manual for calibration steps if available. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 따뜻하게 |
| 모델명 | nHance |
| 컨트롤러 유형 | 디지털 |
| 특징 | 프로그래밍 가능 |
| 색상 | 하얀색 |
| 제품의 특정 용도 | 전기 바닥 난방 |
| 온도 제어 유형 | 프로그래밍 가능 |
| 연결 기술 | Hardwired Electrical Connection |
| 포함된 구성 요소 | Thermostat and Floor Sensor |
| 전원 | 전기 같은 |
| 품목 무게 | 12 온스 |
| 권tage | 120볼트, 240볼트 |
| 모양 | 직사각형 |
| 디스플레이 유형 | 디지털 |
| 제어 유형 | 버튼 제어 |
| 제어 방법 | 만지다 |
| 장착 유형 | 벽걸이형 |
| 스타일 | 프로그래밍 가능 |
| 백라이트 | 예 |
| 사양 충족 | cULus가 나열됨 |
| 왓tage | 1800 와트 |
| 한국어: | 881308051211, 735090525484 |
| GTIN | 00881308051211, 05703502640518 |
| 제조업체 | 오제이전자 |
| 부품 번호 | UDG-4999 |
| 제품 치수 | 5 x 3.5 x 3.25 인치 |
| 품목 모델 번호 | UDG-4999 |
| 첫 번째 이용 가능 날짜 | 13년 2011월 XNUMX일 |
보증 정보
WarmlyYours provides a 3년 보증 on all control products, including the UDG-4999 nHance Programmable Thermostat. This warranty covers defects in materials and workmanship under normal use and service. Please retain your proof of purchase for warranty claims.
지원 및 연락처
For further assistance, technical support, or warranty inquiries, please refer to the official WarmlyYours website or contact their customer service. A detailed User Manual (PDF) is also available for download, which contains comprehensive information and diagrams.
- 공식 사용자 가이드(PDF): 사용자 가이드 다운로드
- 공식 사용자 매뉴얼(PDF): 사용자 설명서 다운로드
- WarmlyYours Store: Visit WarmlyYours Store on Amazon
- For direct support, please visit the WarmlyYours official web연락처 정보 사이트.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.