Rayson TD-1500B34 제본기 사용 설명서

1. 서론

This manual provides detailed instructions for the safe and efficient operation of your Rayson TD-1500B34 Binding Machine. Please read this manual thoroughly before operating the machine to ensure optimal performance and longevity.

The Rayson TD-1500B34 is a robust binding machine designed for medium-sized document binding tasks. It features square holes with a 3:1 pitch, capable of punching up to 15 sheets and binding up to 130 sheets.

2. 안전 지침

• 항상 안정적이고 평평한 표면에서 기계를 작동하세요.
• 작동 중에는 움직이는 부분에 손이나 헐렁한 옷을 가까이 두지 마십시오.
• Do not exceed the maximum punching capacity (15 sheets of 80gsm paper or 2 sheets of 0.2mm PVC cover) to prevent damage to the machine.
• 청소 또는 유지 보수를 하기 전에 기기의 전원 플러그를 콘센트에서 뽑으십시오.
• 어린이의 손이 닿지 않는 곳에 보관하세요.

3. 제품 구성품

• Punching Plate: Area where paper is inserted for punching.
• Binding Handle: Lever used to operate the punching mechanism.
• 바인딩 플레이트: Area where the binding comb is placed for document insertion.
• Disengaging Dies: Individual punch pins that can be disengaged for custom paper sizes.
• Wire Size Selector: Dial to adjust the wire closing mechanism based on wire diameter.
• 용지 여백 조정: Lever to set the distance of the punched holes from the paper edge.
• Paper Scrap Drawer: 종이를 펀칭할 때 발생하는 종이 폐기물을 수거합니다.
• 종이 마개: Guide to ensure consistent paper alignment.

4. 설정

1. 짐 풀기: Carefully remove the binding machine from its packaging.
2. 핸들 설치: Insert the punching and binding handles into their respective slots and secure them.
3. Initial Punching: Before first use, punch several sheets of scrap paper (at least 6 times) to remove any excess oil from the punching dies. This ensures clean punches for your documents.

5. 사용 설명서

5.1. Adjusting Paper Margin

The paper margin adjustment allows you to control the distance of the punched holes from the edge of your document. This is crucial for a professional finish and to ensure pages turn smoothly.

1. Locate the paper margin adjustment knob on the side of the machine.
2. Pull and push the colored tab to select the desired margin depth (e.g., 0.12 inch / 3mm, 0.19 inch / 5mm, 0.27 inch / 7mm).
3. Ensure the selected margin is consistent for all pages in your document.

5.2. 문서에 펀칭하기

The TD-1500B34 can punch up to 15 sheets of 80gsm paper or 2 sheets of 0.2mm PVC cover at once. It supports various paper sizes including A4, Letter, A5, A6, B5, and B6.

1. Adjust the paper stopper to the desired paper size (e.g., A4 or Letter).
2. For custom sizes or to avoid half-punches, disengage specific dies by pulling them out. The machine has 34 holes, and individual dies can be disengaged.
3. Insert the paper squarely into the punching slot, aligning it with the paper stopper.
4. Press the punching handle down firmly and completely to punch the holes.
5. Release the handle and remove the punched paper.
6. Repeat for all pages.

5.3. 구속력 있는 문서

The machine can bind up to 130 sheets of 80gsm paper using 5/8-inch wire binding spines.

1. Select the appropriate wire binding spine size based on the number of sheets to be bound. Use the wire size selector dial on the machine for guidance.
2. Place the wire binding spine onto the binding plate, ensuring the open side of the wire faces upwards.
3. Carefully insert the punched pages onto the open wire spine. Start with the back cover, then the main document pages, and finally the front cover.
4. Once all pages are on the spine, remove the document from the binding plate.
5. Insert the document (with the wire spine) into the wire closing mechanism, ensuring the spine is properly seated.
6. Pull the binding handle to close the wire spine. Adjust the wire size selector if the closure is not perfect.
7. Remove the bound document.

6. 유지관리

• 청소: Regularly empty the paper scrap drawer located at the bottom of the machine. Use a soft, dry cloth to wipe down the exterior.
• 매끄럽게 하기: Periodically punch a few sheets of waxed paper to lubricate the punching dies and keep them sharp.
• 저장: 사용하지 않을 때는 건조하고 먼지가 없는 환경에 기기를 보관하십시오.

7. 문제 해결

8. 사양

• 모델: TD-1500B34
• 펀칭 용량: 15 sheets (80gsm paper) / 2 sheets (0.2mm PVC cover)
• 바인딩 용량: 130 sheets (80gsm paper) with 5/8-inch wire binding spines
• 구멍 유형: 정사각형 구멍
• 정점: 3시 1분
• 구멍의 수: 34
• 조정 가능한 마진: Yes (2.5mm, 3.5mm, 4.5mm)
• Disengageable Dies: 예
• 건설: 전체 금속
• 치수: 18.11 x 10.24 x 13.78 인치
• 무게: 20파운드
• 색상: 흰색+검은색

9. 보증 및 지원

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official RAYSON web사이트. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.

For additional assistance, you may contact Roger's shop, the seller, through the Amazon platform.