Pilot DashCam CL-3033WK

소개

The Pilot DashCam CL-3033WK is designed to record your driving journey, providing a reliable record of events on the road. This manual provides detailed instructions for the proper setup, operation, and maintenance of your dash camera to ensure optimal performance.

Image: The Pilot DashCam CL-3033WK, showing the camera unit and its suction cup mounting bracket.

패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

• Pilot DashCam CL-3033WK Unit
• 석션 컵 마운트
• 자동차 충전기
• USB/Mini USB Charging Cable
• 4GB Storage Card (pre-installed or separate)

Image: A visual representation of the items included in the Pilot DashCam package, specifically highlighting the suction cup mount, car charger, USB/Mini USB cable, and 4GB storage card.

제품 특징

• 표시하다: 2.4" TFT LCD for live view 및 재생.
• 비디오 해상도: 720P (interpolated) for clear recordings.
• 사진 해상도: Up to 3 Megapixels (selectable 1, 2, or 3 MP).
• 오디오 녹음: Integrated microphone for audio capture.
• 저장: Supports up to 32GB MicroSD card (4GB card included).
• Enhanced Night Viewing: 조명이 어두운 환경에서 가시성을 향상시킵니다.
• 동작 감지: 움직임이 감지되면 자동으로 녹화됩니다.
• 루프 녹음: 가장 오래된 파일을 덮어씁니다tage 메모리 카드가 가득 찬 경우.
• 충전식 배터리: Built-in battery for temporary power.
• 회전: Camera rotates 360 degrees for flexible view각도를 나타냅니다.

Image: The Pilot DashCam CL-3033WK display showing recording information, alongside a list of key features and specifications.

설정

1. 메모리 카드 설치

1. 블랙박스 카메라 전원이 꺼져 있는지 확인하십시오.
2. Locate the MicroSD card slot on the side or bottom of the device.
3. Insert the provided 4GB MicroSD card (or a compatible card up to 32GB, Class 10 recommended) into the slot until it clicks into place.
4. 제거하려면 카드가 튀어나올 때까지 조심스럽게 밀어 넣으세요.

2. Mounting the DashCam

1. Clean the desired area on your windshield where you want to mount the dash camera. Ensure it does not obstruct your view.
2. Attach the suction cup mount to the dash camera.
3. 흡입 컵을 앞 유리창에 단단히 대고 레버를 돌려 고정합니다.
4. Adjust the camera angle using the mount's swivel mechanism to ensure a clear view of the road. The camera can rotate 360 degrees.

3. 전원 연결

1. Connect the mini USB end of the car charger cable to the dash camera's power input port.
2. 차량 충전기의 다른 쪽 끝을 차량의 12V 전원 콘센트(시가 라이터 소켓)에 꽂습니다.
3. The dash camera will typically power on automatically when the vehicle's ignition is turned on and begin recording.

4. 초기 충전

The dash camera has a built-in rechargeable battery. For first-time use, it is recommended to charge the device for at least 2-3 hours via the car charger or a USB port before extended use without external power.

작업

전원 켜기/끄기

• 오토매틱: The camera powers on and off automatically with your vehicle's ignition when connected to the car charger.
• 수동 : Press and hold the Power button for a few seconds to manually turn the device on or off.

기본 녹음

• Once powered on, the camera typically starts recording automatically. A red indicator light or icon on the screen will confirm recording is active.
• To manually start/stop recording, press the Record button (usually indicated by a camera icon or 'REC').

루프 녹음

This feature allows continuous recording by overwriting the oldest video files when the memory card is full. Video segments are typically recorded in 1, 3, or 5-minute intervals. Ensure this feature is enabled in the settings menu to prevent recording interruptions due to a full card.

동작 감지

When enabled, the camera will automatically start recording if it detects movement in front of the lens while the vehicle is parked. This feature is useful for monitoring your vehicle when stationary. Access this setting in the menu.

향상된 나이트 비전

The dash camera is equipped with enhanced night viewing capabilities to improve video clarity in low-light conditions. No specific user action is required for this feature; it operates automatically.

사진 모드

• While the camera is on, press the Mode button to switch to Photo mode.
• Press the Shutter/OK button to take a still photograph.

재생

• Press the Mode button to switch to Playback mode.
• Use the navigation buttons (Up/Down) to browse through recorded video files 또는 사진.
• Press the OK button to play a selected video or view 사진.

날짜 및 시간 설정

It is important to set the correct date and time for accurate recording timestamps. Access the 'Date/Time' setting in the camera's menu. Use the navigation buttons to adjust values and the OK button to confirm.

유지

청소

• Use a soft, dry cloth to clean the camera body and screen.
• 렌즈의 경우, 긁힘을 방지하기 위해 특수 렌즈 세척 천과 세척 용액을 사용하세요.
• 연마성 세척제나 용제를 사용하지 마십시오.

메모리 카드 관리

• Regularly format the MicroSD card (every 1-2 months) through the camera's menu to maintain optimal performance and prevent data corruption.
• If the card becomes full and loop recording is not enabled or functioning correctly, manually delete old file카드를 포맷하거나 포맷하세요.
• Consider replacing the MicroSD card periodically, as they have a limited lifespan, especially with continuous recording.

문제 해결

• 카메라 전원이 켜지지 않습니다: Ensure the car charger is properly connected and the vehicle's 12V outlet is functioning. Check if the internal battery has charge.
• Camera stops recording or shows "SD card full": Format the MicroSD card through the camera's menu. Ensure loop recording is enabled. Replace the MicroSD card if the issue persists.
• Date and time reset: This can occur if the internal battery is depleted. Ensure the camera is regularly powered via the car charger. Reset the date and time in the settings.
• 비디오 품질이 좋지 않음: Ensure the lens is clean. Check that the protective film has been removed from the lens. Verify the resolution setting in the menu.
• 마운트가 제대로 부착되지 않음: Clean the windshield thoroughly before attaching the suction cup. Ensure the lever is fully engaged.

명세서

보증 및 지원

Pilot products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or contact the retailer.

For additional support, please visit the official support web대지: www.dashcamsupport.com