Focusrite Scarlett OctoPre Dynamic: 8-Channel Mic Preamp 사용 설명서

소개

The Focusrite Scarlett OctoPre Dynamic is an 8-channel microphone preamplifier designed to expand the input and output capabilities of your audio interface. It features eight high-quality Scarlett mic preamps, precision AD/DA conversion up to 192 kHz, and analogue compression on every channel. This unit is ideal for recording multiple sources simultaneously, such as drums, guitars, keyboards, and vocals, providing professional-grade audio expansion for your studio setup.

설정

1. 포장 풀기 및 초기 검사

Carefully remove the Scarlett OctoPre Dynamic from its packaging. Ensure all included components are present: the Scarlett OctoPre Dynamic unit, a Getting Started Guide, and a Power Cable. Inspect the unit for any signs of physical damage. If any damage is found, contact your retailer immediately.

2. 물리적 연결

The Scarlett OctoPre Dynamic connects to your audio interface primarily via ADAT optical cables. It also features various analog inputs and outputs.

Image: Front Panel Overview. This image displays the front panel of the Scarlett OctoPre Dynamic, showing the first two combination inputs (XLR/TRS), gain knobs, pad switches, and compression controls for each channel. The LED metering and power switch are also visible on the right side.

이미지: 후면 패널 연결부. This image shows the rear panel of the Scarlett OctoPre Dynamic, highlighting the ADAT optical input/output, Word Clock I/O, line outputs, and mic/line inputs 3-8. The power input is on the far left.

1. 전원 연결: Connect the supplied power cable to the unit and a suitable power outlet.
2. ADAT Connection: Use an ADAT optical cable (not included) to connect the ADAT OUT port on the Scarlett OctoPre Dynamic to the ADAT IN port on your audio interface. If your interface supports dual ADAT, you may use a second cable for additional channels at higher samp르 요금.
3. Word Clock (Optional): For advanced synchronization with other digital devices, connect a Word Clock cable from your master clock device to the Word Clock IN on the OctoPre Dynamic, and/or from the OctoPre Dynamic's Word Clock OUT to other devices.
4. 아날로그 입력 :
   • Front Panel Inputs (1-2): These are combo XLR/TRS inputs for microphones, line-level sources, or instruments.
   • Rear Panel Inputs (3-8): These are combo XLR/TRS inputs for microphones or line-level sources.
5. 라인 출력 : The eight balanced line outputs can be used to send audio to a mixing console, monitor speakers, or other outboard gear.

3. 소프트웨어 설정

The Scarlett OctoPre Dynamic is designed to work with any ADAT-equipped audio interface. Configuration and routing are typically managed through your primary audio interface's control software (e.g., Focusrite Control for Scarlett interfaces). Ensure your audio interface drivers are up-to-date.

• 드라이버 설치: Install the latest drivers for your primary audio interface from the manufacturer's web대지.
• 소프트웨어 제어: Open your audio interface's control software. You should see the additional ADAT inputs from the Scarlett OctoPre Dynamic available for routing and monitoring.
• Sample Rate Synchronization: s를 설정하세요ample rate in your DAW and your audio interface's control software to match. The Scarlett OctoPre Dynamic supports samp최대 192kHz의 속도.

Operating the Scarlett OctoPre Dynamic

전면 패널 컨트롤

• 게인 노브: Adjust the input gain for each of the eight channels.
• PAD Switches: Engage the PAD switch for inputs with very high signal levels to prevent clipping.
• INST Switches (Inputs 1-2): Engage for direct connection of instruments (guitars, basses) to optimize impedance.
• 48V 팬텀 파워: Individual 48V phantom power switches are available for each channel to power condenser microphones.
• Compression Controls: Each channel features a single-knob analog compressor.
  • COMP 노브: 압축량을 조절합니다.
  • 더보기 버튼: Doubles the compression ratio for a more pronounced effect.
  • O/L LED: Indicates overload/clipping.
• LED Input Metering: A 5-segment LED meter for each channel provides visual feedback on input levels.
• Sample Rate/Sync Indicators: LEDs display the current sample rate and synchronization status.
• 전원 스위치: 장치를 켜거나 끕니다.

Image: Analog Compression Controls. This close-up shows the individual compression knobs and 'More' buttons for each channel, allowing for dynamic control of input signals. The O/L (Overload) LEDs are also visible.

후면 패널 연결

• 마이크/라인 입력(3-8): Combo XLR/TRS jacks for connecting microphones or line-level sources.
• 라인 출력(1-8): Balanced TRS outputs for sending audio signals.
• ADAT 광 입출력: Used for digital audio transfer to and from your main audio interface.
• Word Clock I/O: 외부 클럭 동기화를 위한 BNC 커넥터.

장치 사용

1. 마이크/악기 연결: Plug your microphones into the XLR inputs or instruments into the TRS inputs (1-2).
2. 팬텀 파워를 적용하세요: If using condenser microphones, activate the 48V phantom power for the respective channels.
3. 게인 조정: Slowly increase the gain for each channel while monitoring the LED meters to achieve a healthy signal level without clipping.
4. Apply Compression: Use the COMP knob to add analog compression. Engage the 'MORE' button for a stronger compression effect.
5. 오디오 모니터링: Route the ADAT inputs from the OctoPre Dynamic within your DAW or audio interface control software to monitor the incoming audio.

유지

• 청소: Use a dry, soft cloth to clean the exterior of the unit. Avoid liquid cleaners or abrasive materials.
• 통풍: 기기의 과열을 방지하기 위해 기기 주변에 적절한 환기가 이루어지도록 하십시오. 환기구를 막지 마십시오.
• 저장: 사용하지 않을 때는 직사광선과 극한 온도 변화를 피해 서늘하고 건조한 곳에 보관하십시오.

문제 해결

• 오디오 신호 없음:
  • Check all cable connections (power, ADAT, audio cables).
  • Verify phantom power is engaged for condenser microphones.
  • Ensure gain knobs are turned up sufficiently.
  • 확인ample rates are synchronized between the OctoPre Dynamic, your audio interface, and your DAW.
  • Check routing settings in your audio interface's control software.
• 왜곡된 오디오:
  • Reduce input gain to prevent clipping (indicated by O/L LEDs).
  • Engage PAD switches for very hot signals.
  • 결함이 있는 케이블이 있는지 확인하세요.
• 동기화 문제:
  • Ensure the OctoPre Dynamic is correctly slaved to your main audio interface via ADAT or Word Clock.
  • Verify Word Clock settings if external synchronization is used.

명세서

보증 정보

The Focusrite Scarlett OctoPre Dynamic comes with a 2년 보증. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official Focusrite website or the included Getting Started Guide.

Image: Warranty Information. This image displays a "Three Year Warranty" logo from Focusrite. Note: Product data indicates a 2-year warranty, which is stated in the text.

지원하다

For further assistance, technical support, or to download the latest software and documentation, please visit the official Focusrite web대지: www.focusrite.com.

공식 제품 영상

Below are official product videos from Focusrite, providing visual guides and demonstrations for the Scarlett OctoPre Dynamic.