PILOT G2 Mechanical Pencil (0.7mm) Instruction Manual

소개

Thank you for choosing the PILOT G2 Mechanical Pencil. This manual provides essential information for the proper setup, operation, and maintenance of your new mechanical pencil. Designed for smooth writing and durability, the PILOT G2 features a comfortable grip and a reliable lead advance system. Please read this manual thoroughly to ensure optimal performance and longevity of your product.

Image: A set of five PILOT G2 Mechanical Pencils, showcasing the different color options available in the pack. Each pencil has a clear barrel, a colored rubber grip, and a matching colored clip.

상자 안에 무엇이 들어있나요?

Your PILOT G2 Mechanical Pencil package includes:

• 5 x PILOT G2 Mechanical Pencils (0.7mm)
• Extra 0.7mm HB Lead Refills
• Extra Eraser Refills

Setup and Refilling

1. Loading Lead

1. Remove the eraser cap from the top of the pencil.
2. Gently insert new 0.7mm lead refills into the opening where the eraser was located. Do not force the lead.
3. Insert 2-3 pieces of lead at a time to prevent jamming.
4. Replace the eraser cap firmly.

2. Replacing the Eraser

1. Pull the used eraser straight out from the top of the pencil.
2. Insert a new eraser refill into the opening.
3. Push the new eraser in firmly until it is securely seated.

이미지: 자세한 view of a single black PILOT G2 Mechanical Pencil, highlighting its ergonomic rubber grip and the metal tip where the lead emerges.

작동 지침

1. Extending the Lead

• To extend the lead, simply click the top button of the pencil repeatedly until the desired lead length is exposed.

2. Retracting the Lead

• To retract the lead, press and hold the top button, then gently push the lead back into the pencil tip with your finger.

3. 에르asing

• Use the white eraser located at the top of the pencil to correct mistakes.

유지

청소

• Wipe the exterior of the pencil with a soft, dry cloth to remove dust or smudges.
• Avoid using harsh chemicals or abrasive materials, as these can damage the pencil's finish.

저장

• Store your mechanical pencils in a pencil case or drawer to protect them from damage and prevent lead breakage.
• 극한 온도와 직사광선을 피해 보관하십시오.

문제 해결

Lead Not Advancing

• Check Lead Supply: Ensure there is sufficient lead inside the pencil. Refill if necessary.
• 막힘 해소: If lead is present but not advancing, gently remove the tip assembly and check for any jammed lead fragments. Use a thin wire or the end of another lead to carefully dislodge any obstructions.

Lead Breaking Frequently

• 압력을 줄이세요: Apply less pressure when writing. Mechanical pencil lead is designed to be strong but can break under excessive force.
• Check Lead Length: Avoid extending too much lead at once. A shorter exposed lead length is less prone to breaking.
• 리드 품질: Ensure you are using high-quality 0.7mm HB lead refills.

명세서

보증 및 지원

보증 정보

PILOT products are manufactured to high-quality standards. For specific warranty details regarding your PILOT G2 Mechanical Pencil, please refer to the packaging or visit the official PILOT web사이트. 구매 증빙 자료로 구매 영수증을 보관하세요.

고객 지원

Should you encounter any issues or have questions not covered in this manual, please contact PILOT customer support through their official web웹사이트 또는 제품 포장에 제공된 연락처 정보를 참조하십시오. 또한 다음 웹사이트를 방문하실 수도 있습니다. PILOT Store on Amazon 더 많은 제품 정보를 보려면.