Bryant BD20/20
BRYANT BD20/20 회로 차단기 사용 설명서
Model: BD20/20
1. 서론
This manual provides essential information for the safe installation, operation, and maintenance of the BRYANT BD20/20 20A 120/240V 2P 10K Circuit Breaker. This device is designed to protect electrical circuits from overcurrent conditions, such as overloads and short circuits, by automatically interrupting the flow of electricity. Please read this manual thoroughly before installation or use to ensure proper function and safety.
2. 안전 정보
경고: 감전 위험. 이 회로 차단기의 설치 및 유지보수는 자격을 갖춘 전문가만 수행해야 합니다. 전기 회로 작업을 시작하기 전에 항상 주 배전반에서 전원을 차단하십시오.
- 설치하는 동안 모든 지역 및 국가 전기 규정을 준수하세요.
- 볼륨을 확인하세요tag회로 차단기의 정격 전류가 전기 시스템의 요구 사항과 일치합니다.
- Do not install or operate the circuit breaker if it appears damaged.
- 절연 장갑과 안전 안경을 포함한 적절한 개인 보호 장비(PPE)를 착용하세요.
- 절대로 우회하거나 t하지 마십시오amp회로 차단기의 보호 메커니즘을 사용합니다.
3. 제품 오버view
The BRYANT BD20/20 is a 2-pole, 20-amp circuit breaker designed for 120/240V applications. It features a 10,000 Ampere Interrupting Capacity (AIC), indicating its ability to safely interrupt high fault currents. The breaker is designed for plug-in mounting in compatible load centers.
This image displays the front of the BRYANT BD20/20 circuit breaker. It clearly shows the two red toggle switches, labeled "ON" and "OFF" for each pole. The brand "BRYANT" and model "BD20-20" are visible, along with "CU-AL SWD" indicating compatibility with copper and aluminum wiring. The UL listing information is also present at the top.
This image shows the bottom side of the BRYANT BD20/20 circuit breaker. Visible markings include "USE ONLY IN LISTED ENCLOSURE", "40 C CPL 60/75 C WIRE", and several patent numbers. The text "MADE IN U.S.A." is also clearly visible, indicating the country of manufacture.
This image displays the top side of the BRYANT BD20/20 circuit breaker. Key information includes the "TORQUE" specifications for wire connections: 14-10 AWG 20 IN.LBS., 8 AWG 25 IN.LBS., and 6-4 AWG 27 IN.LBS. The "CURRENT INTERRUPTING RATING" is also shown as "MAX. RMS SYM. AMPERES 10,000 AT 120/240 VOLTS AC".
4. 설정 및 설치
중요한: Ensure all power to the electrical panel is OFF before proceeding with installation. Use a voltage tester to confirm the absence of power.
- 전원 차단: Locate the main service panel and turn off the main breaker to completely de-energize the panel.
- 패널 접근: Carefully remove the cover of the electrical panel to expose the bus bar and wiring.
- 브레이커 배치: Identify an available slot on the bus bar that is compatible with the BD20/20's plug-in design.
- 설치: Align the circuit breaker with the bus bar and firmly push it into place until it clicks securely. Ensure both poles are properly seated.
- 배선: Connect the circuit wires to the appropriate terminals on the circuit breaker. For the BD20/20, connect the two hot wires to the respective screw terminals. Refer to Figure 3.3 for recommended torque specifications for wire gauges (14-10 AWG: 20 in-lbs, 8 AWG: 25 in-lbs, 6-4 AWG: 27 in-lbs).
- 보안 연결: Tighten the terminal screws to the specified torque to ensure a secure and safe electrical connection.
- 패널 재조립: Replace the electrical panel cover, ensuring all screws are tightened.
- 전원 복원: Turn the main breaker back ON at the service panel.
- 테스트: Test the circuit protected by the newly installed breaker to confirm proper operation.
5. 사용 설명서
The BRYANT BD20/20 circuit breaker operates with simple ON/OFF toggles. When the circuit breaker trips due to an overload or short circuit, the toggle will move to a central or "tripped" position, typically between ON and OFF.
- 켜려면: Push the red toggle(s) firmly to the "ON" position.
- 끄려면: Push the red toggle(s) firmly to the "OFF" position.
- 트립된 차단기를 재설정하려면: First, push the toggle(s) completely to the "OFF" position. Then, push the toggle(s) firmly to the "ON" position. If the breaker immediately trips again, there may be a persistent fault in the circuit that requires professional attention.
6. 유지관리
Circuit breakers like the BRYANT BD20/20 are generally maintenance-free. However, periodic visual inspection is recommended.
- 연례 검사: Annually, or as required by local codes, have a qualified electrician inspect the circuit breaker and its connections for any signs of wear, corrosion, or overheating (discoloration).
- 청소: Ensure the area around the circuit breaker within the panel is free from dust and debris. Do not use liquids for cleaning inside the electrical panel.
- 테스트: While not typically required for residential breakers, some commercial or industrial applications may require periodic testing by a qualified professional.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 브레이커가 자주 작동합니다. | 과부하 회로, 단락 회로 또는 접지 오류. | 회로 부하를 줄이세요. 가전제품의 플러그를 뽑으세요. 배선 손상 여부를 점검하세요. 문제가 지속되면 자격을 갖춘 전기 기술자에게 문의하세요. |
| 브레이커가 재설정되지 않습니다. | Persistent fault (short circuit/ground fault) or internal breaker damage. | Ensure the toggle is pushed fully to "OFF" before attempting to reset to "ON". If it still won't reset, do not force it. Call a qualified electrician. |
| 설치 후 회로에 전원이 공급되지 않습니다. | Breaker not fully seated, loose wiring connections, or main power off. | Verify main breaker is ON. Ensure the BD20/20 is fully seated on the bus bar. Check wire connections for tightness (with power OFF). |
If you are unable to resolve an issue, or if you suspect a serious electrical problem, always contact a qualified and licensed electrician.
8. 사양
| 기인하다 | 값 |
|---|---|
| 모델 번호 | BD20/20 |
| 상표 | 브라이언트 |
| 현재 평가 | 20 Amps |
| 권tage 등급 | 120 / 240V AC |
| 극 수 | 2 |
| 차단 용량(AIC) | 10,000 Amp에레스 |
| 장착 유형 | 플러그인 마운트 |
| 회로 차단기 유형 | 기준 |
| 제품 치수 | 3 x 1 x 3 인치 |
| 무게 | 5.86 온스 |
9. 보증 및 지원
Specific warranty information for the BRYANT BD20/20 circuit breaker is typically provided by the manufacturer or the point of purchase. Please refer to the documentation included with your purchase or contact Bryant customer support for details regarding warranty coverage and terms.
For technical support or inquiries, please contact Bryant customer service or a certified electrician.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.